Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Evergreen
Gate repair in Evergreen, CO usually costs between $160 and $380 for common fixes like hinge replacements, latch adjustments, and operator reprogramming, and we can typically be at your driveway within 60 to 90 minutes. If you live off Upper Bear Creek Road, along Highway 73, or back in the Witter Gulch area, you already know that gates up here fail differently than they do down in the flatlands. The freeze-thaw cycles, the bears, the wet snow that hits 100-plus inches some winters - all of it works against your gate posts, hinges, and operator. Hal Gatewood has been fixing gates since 2001, and the crew that shows up at your place will be from Gate Repair right here in the foothills, not a faceless outfit three states away. Call (877) 610-2993 and you’ll get a live person who knows Evergreen.
Key Takeaways for Evergreen Homeowners
- Most gate repairs in Evergreen run $160-$380; full automatic operator replacement on steep driveways lands between $900 and $2,200 depending on gate weight and grade.
- Bear damage on gates - bent bottom rails, sheared latch bolts, sprung hinges - is a recurring call along the Bear Creek corridor, and flatland techs rarely see it.
- Post heaving from freeze-thaw cycles is the single biggest reason swing gates bind after winter in Evergreen.
- Every job carries Hal’s 90-Day Done Right Promise in writing, plus a free second opinion on any written estimate you’ve already received.
Why Gatewood Fence & Gate Is Evergreen’s Preferred Gate Repair Company
We’re not the biggest gate company in Colorado, and we don’t want to be. Hal Gatewood’s name is on the shop, his license number is public record, and he’s been at it since 2001. The person who answers the phone - any hour, any day - works for Hal, not a dispatch queue. Evergreen homeowners tend to appreciate that after dealing with outfits that quote one number over the phone and bring a different invoice to the door.
Our repair-first approach matters up here. A gate that sags in the hinge post, not in the middle - and that’s where we start. We weld on site in your driveway instead of hauling your gate off to some shop. And if you’ve already got a written estimate from another company, bring it to us. We’ll give you a straight second opinion, no charge. You can also drive to the shop and look Hal in the eye before you hire anyone - the name is on the shop, and the shop is down the road, which is the oldest accountability there is.
Our Gate Repair Services in Evergreen
Electric Gate Repair
Evergreen’s electric gates sit on long private driveways, many of them on grades that would make a Denver installer’s head spin. The operators work harder here - pulling a heavy gate uphill through snow, sleet, and mud season. We troubleshoot the whole circuit: control boards, limit switches, safety edges, keypads, remote receivers. Brand-specific experience matters, and we certify service on DoorKing, Viking, and Linear among others. If your keypad stopped responding after a hard freeze, the fix is often a $45-$85 board-level repair, not a $1,800 operator replacement. When we can save the operator, we do.
That said, some control boards from 1998 or 2003 simply aren’t worth keeping alive. We’ll tell you honestly when retrofitting is throwing good money after bad, and we’ll quote the replacement number before any wrench turns.
Automatic Gate Repair
An automatic gate that suddenly binds after winter in Evergreen is almost always a post heave problem, not a failing motor. Concrete footings here heave several inches during a single freeze-thaw season. The gate shifts out of plumb, the operator strains against the misalignment, and the rack and pinion starts to strip. Up in the Upper Bear Creek area, our crew rebuilt a 1960s cedar swing gate that a black bear had blown through - the bottom rail was bent, the spring latch sheared, and the hinge post had heaved out of plumb. We reset the post on a deeper footing, welded a new steel bottom rail, and installed a heavy-duty keypad entry with a magnetic latch so it stays closed even when a bear leans on it.
That’s the kind of repair that actually holds. Show me a gate closing on its own and I’ll show you where it’s failing - and it’s rarely the brand-new part somebody threw at it.
Hinge & Post Repair
Fix the panel without the post and you’ll fix it twice. In Evergreen, post work is half the job. Most homes here sit on decomposed granite soils that drain poorly when the snow melts, and that means freeze-thaw cycles attack concrete footings from every angle. We dig out the old footing, reset the post on a deeper base with proper drainage, and reattach the gate flat, plumb, and square. Full hinge post resets on an Evergreen driveway gate typically run $220-$450, depending on post size and access.
For older gates - and we see a lot of 1950s-70s rough-cut cedar up here - we often replace just the hinge hardware and reinforce the post with a welded steel sleeve. The wood stays. It has another forty years in it if the structure stops moving.
Gate Realignment
A dragging gate on a sloped Evergreen driveway isn’t always a hinge issue. Sometimes the ground itself has moved. We re-hang gates to match what the driveway is actually doing, not what it looked like when the house was built. That means corrective hinge geometry, adjustable anti-sag kits, and sometimes a complete re-hang on new posts. Realignment on a standard driveway swing gate runs $140-$280 and typically takes four hours or less. If the gate is steel and the bottom frame is twisted, we’ll weld it straight on site rather than swapping the whole panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Evergreen
We stock common parts for Evergreen customers so you’re not waiting a week on a mail-order control board. Gatewood Fence & Gate is factory-certified to service nine major gate brands, and the ones we see most often on Evergreen driveways are DoorKing, Viking, Linear, and Ghost Controls. DoorKing operators tend to live on long ranch driveways off Highway 73 and Brook Forest Road. Viking shows up on commercial and HOA gates around the lake corridor. Ghost Controls is the usual fit for homeowners who built their own gate kits. Whatever brand is mounted to your post, we’ll work on it in your driveway, not in some shop across town.
Common Gate Repair Problems We See in Evergreen Homes
- Post heaving from freeze-thaw cycling. Evergreen’s 7,000-foot elevation means footings freeze hard, thaw slowly, and repeat that cycle dozens of times each winter. Even a gate hung square in September can bind by February, and the operator is usually the first part to tell you something moved.
- Bear-forced entry damage. Jefferson County bear conflict reports are concentrated along the Bear Creek corridor, and gates up here get hit more than people expect. Bent bottom rails, sheared spring latch bolts, and swung hinges are the classic signature. A standard spring latch is essentially no gate at all once a bear decides the garbage is worth investigating.
- Collapsed wood frames from wet snow load. Evergreen’s annual snowfall often tops 100 inches, and the snow is wet and heavy. Older cedar and rough-cut gate frames from the 1950s-70s simply crack under the weight. We see collapsed top rails and split stiles every spring during melt season.
- Solar gate operator failures at altitude. A solar panel and battery that work fine in Golden or Lakewood won’t keep up through Evergreen’s short, cloudy winter days. Undersized batteries drain, operators stall, and gates end up stuck halfway open on the worst mornings of the year.
Pricing for Gate Repair in Evergreen, CO
Here’s the honest number, not a marketing bait. A typical hinge replacement on an Evergreen driveway gate runs $160-$280. Gate realignment lands between $140 and $280. Post resets run $220-$450 depending on post size and soil conditions. Electric gate troubleshooting and board-level repairs generally fall between $120 and $380, while a full automatic operator replacement on a steep driveway runs $900-$2,200 depending on gate weight, grade, and the operator’s duty cycle. Every quote is given and agreed to before any work starts - no invoice surprises at the door. We charge no trip fee inside Jefferson County, and there’s $40 off any repair over $200. Seniors and veterans get a standing 10% discount, permanently. Call (877) 610-2993 for an exact quote - estimates are free.
We Also Serve Cities Near Evergreen
Our crews cover Gate Repair in Evergreen and the surrounding foothills weekend in, weekend out. If you’re down the hill in Ken Caryl, over in Golden, up through Columbine, or out toward Applewood, you’re in our normal service range. Same crew, same pricing, same 90-Day Done Right Promise.
Serving Evergreen, CO - Our Local Coverage Area
We’re based in the Evergreen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Evergreen
Replace the standard spring latch with a magnetic or keyed latch rated for substantial lateral force, and reinforce the bottom rail with steel. Bears along the Bear Creek corridor push through gates rather than climb them, so the damage is almost always lower-rail bending and latch shearing. We install magnetic latches and steel bottom rails on gates in Upper Bear Creek, Marshdale, and along Witter Gulch Road for exactly this reason. Call (877) 610-2993 and we’ll walk your gate before the next bear does.
The almost certain answer is post heaving from freeze-thaw cycles. Concrete footings in Evergreen’s decomposed granite soil heave several inches over a winter, throwing the gate out of plumb and forcing the operator to work against misalignment. The fix is resetting the post on a deeper footing with proper drainage, not replacing the operator. We see this every spring from Brook Forest Road down to the lake.
Yes, in most cases. The frame can be reinforced with steel bracing welded on site, and you can add safety edges, photoelectric sensors, a proper keypad, and a modern operator. What won’t make sense is trying to keep an original 1960s control board running without safety sensors. Those boards predate modern entrapment standards and aren’t worth the liability. Retrofitting the gate frame preserves what’s worth keeping; replacing the operator brings it current.
Only if it’s sized for Evergreen’s winter reality, not Front Range averages. Short winter days and heavy cloud cover mean solar panels underproduce, and wet snow clings to panels long after a storm. Most stock solar kits are undersized. If you already have one, the battery drains, the operator stalls, and the gate freezes halfway open. We can upgrade the battery and panel sizing or switch you to a hardwired low-voltage run. At this elevation, hardwired is the reliable answer on most steep driveways.
Stripped rack and pinion gears caused by operating against a sagging or heaved gate. When the gate isn’t plumb, the motor strains, and the gear teeth pay for it. On steep Evergreen grades, the problem compounds faster because the gate puts constant downhill pressure on the operator. We realign the gate before replacing the rack, or the new gear strips within a year. Call (877) 610-2993 for a straight read on whether your rack is salvageable.
Evergreen Gate Repair You Can Count On
Old gates on steep, forested lots with real wildlife pressure - that’s Evergreen. It’s not the kind of work you learn in a Denver parking lot. Hal Gatewood’s been fixing gates since 2001, welding on site, standing behind every job with the 90-Day Done Right Promise, and answering the phone with a live person around the clock. If your gate is sagging, stuck, sheared, or just plain done, call (877) 610-2993 for a free estimate. Or stop by the shop and look Hal in the eye. The name’s on the door.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Evergreen, CO since 2001.