Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Garland
A proper gate installation in Garland starts with the soil, not the gate. That’s the difference between a gate that swings true for fifteen years and one that binds at the latch every spring. Garage door spring repair in Garland typically costs $180-$340 and is usually done same day, but gate work is a different trade, and around here the work is built around the clay. We’ve been setting posts and hanging gates in North Texas since 2001, and we know firsthand what Blackland Prairie soil does to a hinge post. If you’re planning a new driveway gate, pedestrian gate, or full double gate on your property in Garland, call us at (877) 610-2993. We’ll come out, look at the ground, and give you a written price before any work starts.
Why Gatewood Fence & Gate Is Garland’s Preferred Gate Installation Company
People in Garland don’t want to gamble on a gate installer. They want a name they can find, a phone that gets answered, and a person who will show up. Hal Gatewood’s name is on the shop, the shop is down the road, and when you call (877) 610-2993, a live person picks up. Not a voicemail. Not a call center. That matters when your gate is stuck open at 6 a.m. and the dogs are out.
The crews we send into Garland work the same neighborhoods you live in. We know the older ranch homes off Belt Line Road, the acreage properties out toward Lake Ray Hubbard in 75043 and 75049, and the 1960s-1980s subdivisions where the original gate posts were set 18 to 24 inches deep. That’s shallow for this soil. We also know that when a Garland homeowner says their gate “won’t close,” the post has usually moved, not the hardware. We fix the post first. Many companies want to replace the whole gate. Hal would rather weld on site, set a proper footing, and stand behind it with a written 90-Day Done Right Promise.
Every job gets upfront pricing. The quote you get is the price you pay, agreed before we touch anything. If you’ve been burned by a company that quoted over the phone and changed the number at the door, you’re the reason we do it this way. That’s been the rule since 2001.
Our Gate Installation Services in Garland
We install fences and gates across Garland and the surrounding area, and we’re the team to call whether you need a simple pedestrian gate or a wide rural swing gate with solar power. If you want to know more about how we approach the work, see our Gate Installation service details. Here’s how it breaks down in Garland specifically.
Driveway Gate Installation in Garland
Driveway gates in Garland carry unusual loads. A 16-foot ranch-style gate with cedar boards already weighs a few hundred pounds. Add summer heat that dries those boards, winter ice that adds sudden shock when the operator cycles, and the near-total absence of loam in Garland’s soil, and you’ve got a structure that needs real engineering, not just a box store kit and two bags of concrete. We size hinge posts with steel cores where the span or the wind load demands it. We’re regularly working properties off Rowlett Road and down toward Lake Ray Hubbard where driveway gates span 14 to 18 feet. Those aren’t suburban garden gates. They need a post set for the job.
Pedestrian Gate Installation in Garland
A pedestrian gate into the backyard on a Garland ranch home seems simple. But those homes built in the 1960s and 1970s often have original gate frames still hanging on original posts, and the posts were set shallow. We see latch strikes missing by half an inch because the clay pushed the post over since spring. On a new pedestrian gate, we set posts below the active clay depth. We also hang the gate so the latch lands soft, not hard. It costs a little more up front. It costs a lot less than resetting the post in three years.
Sliding Gate Installation in Garland
Sliding gates solve a real problem on Garland properties where the driveway slope or the setback makes a swing gate awkward. They also handle long spans better than swing gates. We install sliding gates with proper track bases, guide rollers, and motor mounts rated for the gate weight. Near Garland’s eastern edge around Lake Ray Hubbard, long driveways and acreage entrances mean wider gates. A sliding gate takes up less room to operate and doesn’t fight the hinges. We’ll size the motor and rack correctly so the gate doesn’t strip its drive teeth in the first hard freeze. That’s the kind of failure we see on gates installed by someone who didn’t live through a Garland winter.
Swing Gate Installation in Garland
This is the most common gate style in Garland, and the style that suffers most from our soil. A swing gate is basically a big lever attached to a vertical post. When the ground moves, the post moves, and the gate binds at the latch or drags at the bottom corner. For a new swing gate, we set the post with a concrete collar and slope the footing so water runs away. We also set the post plumb and check it with a 4-foot level. When we install a double swing gate on a busy driveway in Garland, we include a proper center stop and drop rod, because a double gate without a center anchor sags at the meeting point. Show me a gate closing on its own and I’ll show you where it’s failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
Gatewood installs and services gate openers from FAAC, BFT, Linear, and several other major brands. For Garland customers, that means you’re not stuck waiting on a specialty part from a supplier who doesn’t know where Garland is. We keep common operator parts on hand, and for the brands we certify, we can handle firmware resets and limit adjustments on site. If you already have an operator brand you like, we’ll build the install around it. If you’re starting fresh, we’ll recommend the brand that fits the gate weight, the span, and the power situation on your property. We don’t sell you a motor bigger than you need.
Common Gate Installation Problems We See in Garland Homes
These aren’t hypothetical. They’re what we find when we show up to a Garland address.
- Hinge post heave on 1960s-1980s ranch homes. The original post was set 18 to 24 inches deep. Garland’s clay swells in spring and the post rises or tilts. The gate still “works” but the latch doesn’t line up and the panel scrapes the drive. The fix is a new post hole to 36 inches with proper drainage.
- Solar openers losing charge in winter. On rural acreage without mains power at the gate, a solar panel gets weak during cloudy winter weeks in Garland. A gate that’s stuck open is a livestock or security problem. We size panels and batteries for December, not July.
- Double gate sag after summer drought. Cedar panels dry and shrink in a Garland summer, then the clay below shrinks too. The hinge post tilts by August, the meeting stile splits, and the operator gear strips when the arm fights the misalignment. Proper post depth prevents this, but most original installs didn’t have it.
- Undersized operators on wide gates. A motor sized for a 10-foot suburban gate gets hung on a 16-foot ranch gate and burns out inside two years. We see it in the 75043 and 75049 corridors often. The motor isn’t broken. It was wrong from day one.
Pricing for Gate Installation in Garland, TX
On a typical Garland property, a single swing gate with one operator runs $2,400-$4,600 installed, depending on width and power. A double driveway gate with automation usually lands at $4,800-$8,500. A pedestrian gate without power runs $700-$1,400. Sliding gates start around $3,200-$5,800 for a basic powered install. Long runs for conduit, solar panels where no power exists, and custom wrought iron all push the number up. The price we quote is the price you agree to, written down, before we dig the first hole. If you’ve got a written estimate from someone else, bring it to us and we’ll give you a free second opinion. Call (877) 610-2993 for a no-cost site visit.
| Install Type | Typical Range |
|---|---|
| Pedestrian gate, no power | $700-$1,400 |
| Single swing gate with operator | $2,400-$4,600 |
| Double driveway gate, automated | $4,800-$8,500 |
| Sliding gate, basic powered install | $3,200-$5,800 |
We Also Serve Cities Near Garland
Our Gate Installation in Garland crews also cover the surrounding communities. If you live in Sachse, Rowlett, Richardson, or Murphy, call the same number and ask for a free estimate. The soil issues don’t change much at the county line. Blackland Prairie clay doesn’t know what city it’s under.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Garland
Garland sits almost entirely on Blackland Prairie expansive clay, which swells with spring rain and shrinks in summer drought. That repeated shrink-swell cycle pushes gate posts out of plumb by 2 to 4 inches every year. Plano to the north has a drier soil composition that doesn’t move the same way. A Garland gate post set less than 36 inches deep will move. It’s not a defective gate. It’s a shallow footing. Call (877) 610-2993 if you’re fighting a gate that binds every spring. We’ll take a look and tell you if the post needs resetting or sistering.
If your gate is more than 100 feet from the nearest power source, solar is usually the better option than trenching new conduit. We installed a 16-foot ranch-style swing gate on a long driveway off Rowlett Road in 75043 where the customer’s previous gate had been pulled off its hinge post by livestock pressure. Our crew dug new post footings to 36 inches below grade with concrete collars sized for the expansive clay, set the hinge post with a steel core, and paired a solar gate opener with a rack and pinion drive because there was no mains power within 200 feet. Six months later the gate still swings true even after spring rains, because the post footing was built for the soil, not just the gate.
At least 36 inches, with a concrete collar and a gravel base for drainage. Deeper is better for wide gates. The original posts on Garland’s 1960s and 1970s ranch homes are often 18 to 24 inches deep, and that’s exactly why the gates bind and the latches stop lining up. The post didn’t fail. The depth did. We set posts to the soil, not to a national average.
Yes. We install solar gate openers on rural properties in 75043 and 75049 regularly, and we size the panels and batteries for winter performance, not peak summer sun. A solar setup that only works in July leaves your gate stuck open in a wet February. We’ve also paired solar openers with rack and pinion drives where a long run made a standard swing-arm opener impractical. Tell us what you’re fencing, and we’ll spec the power accordingly.
The operator is usually fighting a gate that’s out of alignment. When the summer heat dries the clay and the post tilts, the gate drags or binds, and the safety sensor reads that as an obstruction. The operator reverses because it thinks it hit something. That’s usually a post problem, not a circuit board problem. We fix the alignment first, then test the motor. If the motor is fine, you’ve saved yourself a full replacement. If the motor is burned out from years of fighting the misaligned gate, we’ll tell you that too.
Contact Gatewood Fence & Gate for Gate Installation in Garland, TX
If your gate post has moved, your opener has stopped, or you’re planning a new driveway gate, call (877) 610-2993. A live person answers, day or night. We serve Garland from our Dallas-Fort Worth office, with crews that know the soil and the neighborhoods. Hal Gatewood’s name is on the work, and the 90-Day Done Right Promise is on paper, every time. Estimate is free, price is agreed before work starts, and if you’re a senior or veteran, you get 10% off for good. Always.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Garland, TX since 2001.