Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Garland
Gate access control in Garland usually fails for one reason that has nothing to do with the electronics: the Blackland Prairie clay under your gate post has moved again. A keypad that won’t accept codes, a remote that opens the gate but won’t close it fully, a card reader that blinks red when it should blink green – in Garland, we check the post before we touch the board. A typical keypad or remote repair runs $95-$160, while a full system retrofit with new safety edges and a video intercom starts around $700. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Garland’s Preferred Gate Access Control Company
Hal Gatewood started this shop in 2001, and the name on the invoice is the same name on the door. When a Garland homeowner calls about a gate that won’t respond to the remote, they’re not talking to a call center three states away. They’re talking to someone who knows that the clay in 75043 moves differently than the clay in 75044, and that a fence gate hung on an 18-inch post in 1975 was never going to hold plumb through forty North Texas seasons. That kind of local knowledge means we don’t replace a $300 control board when the real problem is a post that’s drifted two inches since April.
Our Garland customers call back for a different reason than other gate companies hope for: they call to say the gate still works a year later. The 90-Day Done Right Promise is in writing on every job, and if something isn’t right, one call brings Hal back. No runaround, no dispatch queue. We answer around the clock with a live person, and we show up when we say we will.
We’re locally owned and owner-operated, with a published address and license number anyone can look up. Hal’s crew is background-checked and uniformed, and they’re certified to service nine major gate brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you want to look the owner in the eye before you hire him, drive to the shop. The name is on the building.
Our Gate Access Control Services in Garland
Not every gate problem in Garland is a board problem. Here’s what we actually do when we get out to your driveway. Our full Gate Access Control service line covers all of it.
Keypad Entry
A keypad that won’t take codes in Garland is often working fine electronically. The gate leaf has sagged or the post has heaved, and the latch no longer lines up with the strike, so the system thinks the gate never closed. We check alignment first, then the keypad itself. Typical keypad replacement in Garland runs $120-$190; a full keypad with new wiring and a weatherproof housing is $225-$350. If the keypad is fine and the post is the culprit, we tell you that before we sell you anything.
Remote Control
Remotes wear out, yes, but in Garland heat is the silent killer. June through September bakes the micro-switches and battery contacts inside hand remotes. A standard replacement remote for LiftMaster or DoorKing systems runs $45-$90 programmed, and we do the programming in your driveway. If the remote works but the gate won’t start, we test the receiver at the operator rather than selling you a second remote you don’t need.
Phone Entry
Phone entry systems are the default upgrade for Garland driveway gates from the 1970s and ’80s, when a keypad was the only option. Those old boards don’t fail quietly; they fail when a winter ice storm shorts a relay that’s been baking for five summers. A phone entry retrofit in Garland runs $350-$650 depending on whether we can reuse your existing wiring. If your gate was hung before modern wiring standards, we can still do it. We pull new wire where it’s needed, and we tell you if it isn’t.
Card Reader
Card readers on Garland gates built in the 75040, 75041, and 75042 corridors see a lot of dirt and UV. The reader itself is usually fine; the strike plate and the gate alignment are not. We fix the alignment, then the reader if it’s genuinely failed. A replacement card reader runs $180-$320 installed, and we can program existing cards so you don’t have to reissue everything.
Video Intercom
Video intercoms are the single best upgrade for a Garland homeowner who’s tired of walking to the gate to see who’s there. Even houses built before modern low-voltage wiring can take a video intercom, because we can pull new cable or use wireless options that work fine in Garland’s flat suburban lots. A basic audio video intercom starts near $400; a Wi-Fi video system with smartphone app runs $700-$1,200 installed. The camera has to survive North Texas heat, so we don’t install cheap plastic housings that warp in August.
Smart Access
Smart access means your gate opens from your phone, logs every entry, and lets you grant temporary codes to a contractor or housekeeper. Garland homes with smart access are mostly in two camps: newer builds where it was original, and older ranch homes where a homeowner got tired of keypad codes being shared. A smart access module retrofitted to an existing operator runs $300-$550. If your operator is pre-UL 325 and won’t support an add-on, we’ll tell you before you spend anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We service FAAC, BFT, and Linear operators every week in Garland, plus LiftMaster, DoorKing, Viking, Ghost Controls, Elite, and Mighty Mule. We keep common FAAC and Linear control boards and safety edges in our local inventory, so a Garland repair doesn’t wait on a freight truck. BFT and FAAC are common on older Garland driveway gates; Linear shows up on a lot of 1990s installs. If your brand isn’t on the list, call anyway. Hal has been at this since 2001 and there aren’t many gate control boards he hasn’t opened.
Common Gate Access Control Problems We See in Garland Homes
- Hinge post heave from clay shrink-swell. In 75043 and 75049 near Lake Ray Hubbard, a swing gate hinge post can move 2-4 inches out of plumb in a single wet-dry cycle. The keypad reads ‘open’ because the latch no longer aligns, even though the gate looks closed.
- Pre-UL 325 operators without entrapment protection. Old LiftMaster and FAAC gate operators from the 1970s and ’80s often lack photo-eyes and loop detectors. A sagging swing gate can close on a car or a person without reversing. We can retrofit safety edges and photocells on most older operators.
- Baked grease and stripped gears. Garland’s triple-digit summer heat bakes lubricant out of rack and pinion slide gate hardware in 75042. The gate stalls mid-travel, and then a winter ice storm adds a shock load that strips gear teeth on the operator.
- Keypad codes that work intermittently. Sometimes the keypad is fine and the wiring is the problem. Expanding clay soil in 75040 and 75041 can pull buried control wire apart at the conduit joint, causing codes to fail only when the ground is dry and the wire has separated by a fraction of an inch.
Pricing for Gate Access Control in Garland, TX
Every quote includes the price before any work starts. No price changes at the door. A keypad replacement in Garland typically runs $120-$190; a new remote $45-$90 programmed; a card reader $180-$320; a phone entry retrofit $350-$650; a video intercom $400-$1,200 depending on Wi-Fi vs. hardwired; a smart access module $300-$550. What moves the price is depth of post work and whether your existing operator is worth retrofitting. A full access control system with keypad, safety edges, and video on a new post runs $1,800-$3,200 in Garland depending on gate width and wiring distance. Estimates are free. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount on everything.
If you’re in Garland and you’re comparing quotes, bring us the written estimate. Hal will give you a free second opinion. The name is on the shop, and the shop is down the road.
We Also Serve Cities Near Garland
Our crews run from this metro office to Sachse, Rowlett, Richardson, and Murphy regularly. The same clay soil runs under all of them, though the moisture swings near the lake in Rowlett and Sachse are the worst. For a full look at what we offer, see our Gate Access Control in Garland page and call (877) 610-2993 for a free estimate.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Garland
Because the Blackland Prairie clay under your gate post swells in spring rains and shrinks in summer drought, moving the post 2-4 inches out of plumb every year. The fix is not adjusting the latch; it’s pulling the old 18-inch footing and pouring a deeper pier with rebar so the post stays where it belongs. Call (877) 610-2993 and we’ll tell you if your post needs a deeper footing or a full reset.
Yes, in most cases. We add photo-eyes, safety edges, and loop detectors to pre-UL 325 operators all over Garland, and the retrofit typically costs $250-$600 depending on the operator and the gate run. If the old board can’t support the safety inputs, a new board is $300-$500. Call (877) 610-2993 and we’ll assess it for free.
No. The keypad is usually fine; the gate leaf has sagged or the hinge post has heaved out of line with the strike. We reset the post or rehang the gate, then the keypad works again without replacing anything. In Garland it’s almost always the clay, not the circuit board. Call (877) 610-2993 and we’ll confirm it in person.
Because summer heat baked the grease out of the gear teeth, the gate was already straining, and the ice storm added a sudden shock load. We replace the stripped gear, regrease with a high-temp lubricant, and check the post before we call it done. A gear replacement on common FAAC, BFT, or Linear operators runs $180-$320. Call (877) 610-2993 for an exact quote.
Yes. We pull new wire where the old 1970s wiring is too degraded to carry video signal, or we use a Wi-Fi video unit that needs only a power source. Most Garland ranch homes in the 75040-75042 corridors can take a video intercom for $400-$1,200 installed. Call (877) 610-2993 and we’ll look at what you have before quoting.
Call Gatewood Fence & Gate for Gate Access Control in Garland
If your gate won’t open, won’t close, or won’t let you in without a fight, call (877) 610-2993. A live person answers 24/7, not a voicemail. We’ll give you a free estimate, write the price down, and stand behind the work with the 90-Day Done Right Promise in writing. Hal Gatewood has been fixing gates in North Texas since 2001, and his name is on every invoice.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Garland and the surrounding communities since 2001.