Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Garland
Gate repair in Garland starts with understanding the ground your gate is set in. Most gate failures in Garland aren’t broken hardware, they’re the Blackland Prairie clay under the post shifting and heaving through the seasons. We fix that with on-site welding and posts reset the right depth, not a band-aid adjustment.
Hal Gatewood has been repairing gates since 2001, and his crew shows up in a marked truck with the parts on board to handle most repairs in one visit. If your gate won’t latch, drags on the ground, or the opener just hums without moving, call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is Garland’s Preferred Gate Repair Company
Because we actually understand what Garland does to a gate. The clay soil here doesn’t just shift posts a little. It pushes a hinge post 2 to 4 inches inward over the course of a wet spring, and then every latch, every striker, and every operator alignment is off. Companies without local experience replace parts and blame the gate. We reset the post so the repair holds.
Our reputation in Garland is built on showing up when we say we’ll show up. Homeowners in Ridgewood Park, Eastern Heights, and Valley Creek call us because the price Hal quotes on the phone is the price on the invoice. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print.
We also know the housing stock here. The 1960s through 1980s ranch homes across Garland’s 75040, 75041, 75042, and 75044 ZIP codes hold thousands of original cedar privacy gates and ornamental iron driveway gates. Those posts were often set only 18 to 24 inches deep, and that depth was never enough for this clay. That’s why a gate that worked fine for decades suddenly won’t close after a wet spring.
Call us at (877) 610-2993 and you’ll get Hal’s crew dispatched from the Dallas-Fort Worth office, rolling into Garland usually the same day for urgent repairs. A live person answers every call, 24 hours a day, seven days a week.
Our Gate Repair Services in Garland
Hinge & Post Repair
This is the repair we do most in Garland, and it’s the one most people don’t know they need. Clay soil expands and contracts with moisture, and over a wet spring it can push a hinge post 3 inches out of plumb. The gate still looks fine, but the latch won’t catch and the gate rubs the frame. We excavate the footing, sister a new steel post with a deeper concrete base, and rehang the gate straight. On-site welding keeps the whole job in your driveway instead of hauling the gate to a shop.
Gate Realignment
When a gate sags, it sags in the hinge post, not in the middle. In Garland, realignment almost always means correcting what the soil did to the post before touching the gate itself. We use heavy come-alongs and welded steel brackets to pull the post back to true, then brace it so the next rain doesn’t undo the work. Fix the panel without the post and you’ll fix it twice. We’d rather fix it once.
Electric Gate Repair
Garland’s triple-digit summers bake the lubricant out of operator gearboxes, and many of the older LiftMaster and FAAC units still running in the area are overdue for that failure. We diagnose the actual fault: control board, capacitor, limit switch, or stripped gear. Then we replace the part that failed, not the entire unit just because it’s easier. If the repair isn’t cost-effective, we’ll tell you plainly and give you actual numbers for a replacement. Certified to service major brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we keep common boards and parts on the truck for Garland calls.
Automatic Gate Repair
Automatic gate openers in Garland die two ways. Summer heat kills the electronics gradually, and winter ice storms deliver sudden shock loads that strip gears and crack welds. We repair both failure modes, and we always check the gate’s physical alignment before touching the operator. A gate that’s out of plumb will destroy a new opener’s gears in months. When we install or repair an automatic opener, we test the safety edges and photocells as part of the job, the way it should have been from day one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
Garland homes have a lot of legacy openers: LiftMaster units installed in the 1990s, FAAC hydraulic operators on older iron gates, Linear boards that are still ticking. We service all of them. For Garland customers specifically, we keep the common mid-2000s LiftMaster control boards, FAAC capacitor kits, and Linear limit switch assemblies stocked on the truck, so when the board dies on a Saturday morning we’re often done by noon.
We’re factory-certified for nine major brands, but the older units are where our experience pays off. If your opener is 20 years old and the parts are discontinued, we’ll tell you that in plain English, give you a retrofit option if one exists, and quote the replacement honestly.
Common Gate Repair Problems We See in Garland Homes
- Post heave from Blackland Prairie clay. The single biggest gate failure driver in Garland. The soil’s shrink-swell cycle pushes hinge posts inches out of plumb every wet season, and no amount of latch adjustment fixes a post that moved 3 inches since March.
- Stripped gears in automatic openers after summer heat and winter ice. Triple-digit summers dry out the gear teeth, then a January ice storm adds a sudden load. The gears don’t slip: they strip. On older FAAC and Linear units we see this constantly.
- Cedar gate pickets warping and pulling loose. The 40-to-50-year-old cedar gates across Garland’s 75040 and 75041 neighborhoods dry out in the North Texas heat, then swell in spring rain. Screws pull through soft wood, pickets separate, and the gate loses its shape. Replacing the hardware without addressing the post movement won’t hold.
- Weld failures on iron gates. Ornamental iron driveway gates from the 1970s and 1980s crack at the hinge welds, usually after an ice storm adds sudden weight. Our on-site welding repairs the gate in place without removing it from the driveway, so the whole job is usually done in one visit.
Pricing for Gate Repair in Garland, TX
Gate repair in Garland runs a wide range because the soil here can mean a simple alignment job or a full post excavation. But here are real numbers for the Garland market:
| Repair Type | Typical Garland Cost Range |
|---|---|
| Gate realignment (no post reset) | $85 to $250 |
| Hinge replacement (welded, one gate leaf) | $180 to $450 |
| Post reset with concrete (single post) | $400 to $900 |
| Automatic opener control board replacement | $250 to $600 |
| Opener gear replacement (chain or screw) | $180 to $400 |
| Complete opener replacement (installed) | $850 to $2,500 depending on unit |
| Weld repair (cracked hinge or frame) | $120 to $350 |
Every job starts with a fixed quote before any work begins. No trip charge inside Garland’s county. Free second opinion on any written estimate from another company. Seniors and veterans get a permanent 10% off. Any repair over $200 knocks $40 off. Call (877) 610-2993 and you’ll get the number on the phone, not at the door.
We Also Serve Cities Near Garland
We handle Gate Repair calls all over northeast Dallas County. Beyond Garland, our crews work Sachse, Rowlett, Richardson, and Murphy. Many of those calls come from homeowners who heard about us from a Garland neighbor and didn’t want to take a chance on a company that doesn’t know the soil. If you’re in one of those cities, our Garland crew covers you just the same.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Garland
The clay soil under your hinge post is the answer. Blackland Prairie clay swells in spring when it absorbs rainwater, and the expansion pushes your hinge post inward 2 to 4 inches. That makes the gate bind against the frame and the latch misalign. In winter the soil dries and contracts, the post shifts back slightly, and the gate swings freely again. The gate itself likely isn’t damaged: the post needs resetting or sistering with a deeper concrete base, and trying to adjust the latch to compensate will only buy you a few months. This is the single most common repair we do in Garland. Call (877) 610-2993 for an exact look at your gate.
If the opener predates modern safety photocells and current motor controls, replacement is often the cheaper long-term answer. Obsolete control boards become harder to source each year, and an aging gearbox that’s already survived 40 Garland summers is living on borrowed time. We’ll inspect the unit, check whether the board or gears can be economically replaced, and give you a straight recommendation. For most 1980s and even many 1990s openers still running in Garland’s older subdivisions, a new LiftMaster or FAAC operator with safety photocells costs less over five years than patching an obsolete unit every 18 months. We’ll show you the numbers and let you decide.
In most cases, yes. Older slide gate operators often predate the entrapment-protection standards now required, and retrofitting modern safety photocells and edge sensors is a repair we routinely perform on Garland properties. We wire the new sensors into the existing control board if it has the right terminals, and we program the entrapment reversal settings so the gate backs off if it encounters resistance. If your board won’t accept modern sensors, we’ll tell you that directly and quote a board or full unit replacement. Gates that close on cars, pets, or people are a serious safety problem, and our Gate Repair in Garland work always includes a safety check on any opener we touch.
Because the post moved, not the hinges. A gate that sags does so from the hinge post, and in Garland’s clay soil that post shifts deeper and deeper each wet season if it was set shallow. You can swap the hinges for the strongest hardware made and the gate will sag again the next spring. The actual repair is resetting or sistering the post with a concrete base that extends below the frost and shrink-swell line. On 40-year-old cedar gates in the 75040 and 75042 corridor, we also check whether the post itself has rotted at ground level, which is common in this climate. The fix usually: new treated steel post, deeper concrete, re-hang the existing gate if the panel is sound. Skip the post and you’ll be back on the phone in 18 months.
Constantly. The 75043 ZIP code, and the neighborhoods east toward Rowlett and the lake, sit right on the Blackland Prairie and experience the most extreme soil-moisture swings in all of Garland. Homeowners there contend with a near-annual cycle of summer shrinking soil and winter-to-spring expansion that makes post heave and gate misalignment a recurring issue. In those lake-adjacent areas, a gate that’s properly set at 30 to 36 inches deep with concrete below the active clay zone will last decades. A gate set at 18 inches will shift every single year. We reset posts out near the lake more than anywhere else in Garland, so if you’re in 75043 or off Naaman School Road or near Firewheel, we know exactly what we’re walking into. Call (877) 610-2993 and describe what the gate’s doing; we’ll be straight with you about what it needs.
Contact Hal Gatewood’s Crew for Your Garland Gate Repair
The gate that won’t close is a security problem. The post that’s heaving is a soil problem. Neither fixes itself. Call (877) 610-2993 and talk to a live person who will tell you honestly whether you need a $150 realignment or a $600 post reset. You’ll get Hal’s name on the invoice, a written 90-Day Done Right Promise, and the price you agreed to before any work starts. Free estimates, no trip charge inside the county, and a senior or veteran discount that’s automatic, not asked for. If you prefer, drive to the shop and look at the address yourself. The name is on the building.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Garland and surrounding communities since 2001.