Gate Access Control in White Plains - Written Price, Install Date Set

Fast, Reliable Gate Access Control Across White Plains

Gate access control repair and installation in White Plains usually runs $240-$640 for keypad or card reader work, and $450-$1,500 for video intercom systems depending on the gate and wiring. Most jobs in the 10601, 10602, and 10607 ZIP codes are finished the same day or early the next morning. We’ve been working on Westchester gates since 2001, and we know the difference between a 1960s parking entrance off Mamaroneck Avenue and a 1990s ornamental swing gate in the Highlands. Call (877) 610-2993 and a live person answers, 24 hours a day. We’ll give you a straight price before any work begins.

Call (877) 610-2993

Key Takeaways:

• Keypad entry and card reader service in White Plains typically runs $240-$640.
• Video intercom systems run $450-$1,500 installed, depending on gate configuration and existing conduit.
• We answer the phone 24/7 with a live person, not a voicemail tree.
• Every job carries the 90-Day Done Right Promise in writing.
• Free estimates, no trip charge inside the county, $40 off any repair over $200.

Why Gatewood Fence & Gate Is White Plains’s Preferred Gate Access Control Company

Hal Gatewood has been fixing gates since 2001, and his name is on the shop and on every invoice. White Plains homeowners keep calling us back because the person who quotes the job is the person who does the job. No subcontractors, no unknown crew in an unmarked van. When you call about a failing keypad at a condo on Battle Hill or a seized swing gate off North Street, you get a real answer from a real person who has already worked on that exact problem hundreds of times in Westchester.

We’re locally owned and owner-operated, with a published address and license number anyone can check. Dispatch and scheduling are coordinated from our New York City office, but the crews serving White Plains work here every week. That means parts don’t get ordered from a warehouse three states away. We stock control boards, keypad components, photo eyes, and receiver cards for the brands that fail most in this ZIP code.

We carry a 90-Day Done Right Promise on every access control job. If something isn’t right after we leave, one call brings us back. Not a call center, not a form. Hal answers the phone. There’s also a permanent 10% discount for seniors and veterans, $40 off any repair over $200, and a free second opinion on any written estimate you’ve received from another company.

Our Gate Access Control Services in White Plains

White Plains is a city of tight sites. Shared driveways in Gedney Farm, sliding gates where a swing gate won’t clear the property line, parking entrances that have to keep working during the repair. We handle all of it.

Keypad Entry

Keypad entry in White Plains usually means one of two things: a residential keypad on a 1990s ornamental gate in neighborhoods like Highlands or Gedney Farm, or a commercial keypad at a downtown parking entrance near the Galleria corridor. The residential units fail from water intrusion at the keypad face or from wire degradation in the hinge conduit. The commercial units fail from wear and ice. We replace keypads, run new wire when needed, and program entry codes on-site before we leave. A keypad swap with wiring runs $210-$380 in most White Plains residential applications. If we’re repairing an existing keypad rather than replacing it, it’s often under $200.

Remote Control

Transmitter and receiver work covers handheld remotes, visor remotes, and the receiver cards inside LiftMaster, Linear, Ghost Controls, Viking, and DoorKing operators. In a White Plains residential gate, the failure is usually the receiver board, not the remote itself. We program and hand you the remote before we leave the driveway. A receiver replacement with two programmed remotes typically runs $180-$320.

Phone Entry

Phone entry systems at White Plains condos and small apartment buildings off Mamaroneck Avenue and Central Park Avenue need a landline or cellular module that ties into the gate operator. When a phone entry panel fails, the failure point is usually the surge protector or the line connection, not the board. We test the line, replace the surge protection, and program resident numbers. Phone entry system repair starts around $300 and usually finishes below $800 for a full panel replacement with cellular communication.

Card Reader

Card readers on downtown White Plains parking gates see heavy winter salt and ice exposure. The reader housings crack from thermal cycling, then water gets in and kills the electronics. We replace the reader, verify the controller protocol, and reissue cards if the existing credential format is still available. A single card reader swap on a commercial gate in White Plains typically runs $350-$750 depending on the brand and wiring condition. Residential card reader installation, common on shared driveways in Scarsdale-adjacent neighborhoods, often runs $280-$520.

Trusted Brands We Service in White Plains

We’re certified to service nine major gate brands, and in White Plains the most common access control callouts are LiftMaster and Linear from the 1990s residential wave, plus DoorKing and Viking on downtown parking gates. We also work on Ghost Controls, Elite, FAAC, BFT, and Mighty Mule. Because we service White Plains every week, we know which parts fail fast in this climate and which boards to stock. That means when your Gate Access Control needs a new photo eye or receiver card, we often have the part on the truck the first trip.

Common Gate Access Control Problems We See in White Plains Homes

• Hydraulic swing-gate operators seizing in sustained cold. From November through March, White Plains gates with hydraulic arms lock mid-travel. The fluid thickens in hard freezes, and the motor pulls extra current until the limit switch trips. We replace the seals and refill with cold-rated hydraulic fluid, or convert to an electromechanical operator if the gate weight allows.
• Slide-gate tracks binding from ice and road salt. Downtown parking entrances and residential slide gates near Mamaroneck Avenue collect ice and rock salt all winter. The rack and pinion drive binds, the chain slaps, and the operator overheats. We clear the track, realign the rack, and set the force limits so the gate doesn’t trip its own safety stop on cold mornings.
• Masonry gate posts off-plumb from frost heave. White Plains’s 1960s and 1970s condo and single-family lots have original brick or stone gate posts set in shallow footings. Decades of freeze-thaw push them off vertical, which throws off limit switches and hinge alignment. The gate sags at the hinge post, not in the middle. We reset the post or fabricate a custom hinge plate rather than selling you a whole new gate.
• 1990s LiftMaster and Linear operators hitting end-of-life simultaneously. Neighborhoods like Highlands and Gedney Farm saw a wave of automated driveway gate installations in the 1990s, when Westchester security upgrades were fashionable. Those units are 25-30 years old now and failing in volume. The pattern is predictable to a local tech: control board failures, worn limit switches, and plastic gear trains stripped from hard winter use.

Pricing for Gate Access Control in White Plains, NY

We Also Serve Cities Near White Plains

We work throughout central Westchester, including White Plains neighborhoods like Highlands, Battle Hill, and Gedney Farm, plus nearby Hartsdale, Scarsdale, Greenburgh, and Irvington. The same live-person phone line and the same 90-Day Done Right Promise apply everywhere. The Gate Access Control team stocks parts for all these towns.

FAQs - Gate Access Control in White Plains