Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across White Plains
Gate repair in White Plains, NY usually costs between $185 and $600 depending on whether we’re fixing an operator, a hinge post, or realigning a heavy iron gate. Most repairs we complete the same visit because the truck carries welders, gear racks, limit switches, and common circuit boards for the brands that dominate this city. A live person answers at (877) 610-2993 any time, day or night, and the price is agreed before we start work. If you live near the Galleria, up in the Highlands, or over by Gedney Farm, you’re calling a shop that has worked every corner of White Plains.
White Plains has a gate-repair market you won’t find in Scarsdale or Hartsdale. Downtown, there are 1960s and 70s parking garage gates and apartment entry systems that need commercial-grade parts and a different kind of urgency. Up the hill in the residential neighborhoods, there are custom wrought-iron driveway gates with operators installed in the 1990s that are now failing one after another. We handle both because Hal Gatewood built this business around the idea that a gate tech should be able to weld a cracked hinge in the morning and troubleshoot a Viking loop detector in the afternoon. That’s what Gate Repair means to us here.
Call (877) 610-2993 and you’ll get a person who knows White Plains. Not a recording, not a call center. Hal or one of his crew.
Why Gatewood Fence & Gate Is White Plains’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and the shop is located where anyone can find it. The name is on the door. That matters in White Plains because a lot of gate work here involves gates that have been patched by someone who drove up from somewhere else and was never heard from again. We hear that story around Gedney Farm and Highlands more than anywhere. A homeowner pays a tech to replace a circuit board, the gate works for two weeks, and then the phone number is dead. We’d rather fix the actual problem and stand behind it.
Every job carries our 90-Day Done Right Promise in writing. If the repair doesn’t hold, one call brings Hal back. No fine print, no argument. It’s a plain promise: done right or made right.
We answer the phone with a live person 24 hours a day, 7 days a week, even at 2 a.m. when a garage gate is stuck open and the property isn’t secure. Hal has been owner-operated since 2001, and the person who shows up at your White Plains driveway is background-checked and in uniform. Not a rotating cast, not a subcontractor. The same crew that neighbors on Mamaroneck Avenue and North Street recommend.
Our reputation in White Plains is built on the jobs where we told someone the truth: their 1994 Linear operator had a rusted gear rack, not a dead motor. Their sagging ornamental gate needed hinge post reconstruction, not panel replacement. Fix the post and the gate hangs straight. That’s not upselling. That’s just how gates actually fail here.
Our Gate Repair Services in White Plains
Electric Gate Repair
Electric gate repair in White Plains runs $195 to $480 for most jobs, with circuit boards and sensors being the most common parts we replace. The city’s hard freezes from November through March are brutal on exposed wiring and connections. Moisture gets into a junction box, freezes, expands, and suddenly your gate works on Tuesday and doesn’t on Wednesday. We diagnose the exact component that failed and we only replace what’s actually broken. Upfront pricing in writing before any work begins.
Automatic Gate Repair
Automatic gate repair in White Plains typically costs $220 to $600, with limit switch failures and operator burnout being the two biggest problems we see citywide. Those 1990s LiftMaster and Linear operators in the Highlands and Gedney Farm are now 25 to 30 years old, and they’re failing in a predictable wave. The good news is that many of them are worth repairing. A new motor from our Gate Motor & Opener in White Plains on an old chassis often buys another decade, and we stock the parts to do it same-day. Before you let anyone talk you into a full replacement, get our second opinion, which is free on any written estimate.
Hinge & Post Repair
Hinge and post repair in White Plains averages $260 to $520, and it’s the repair we do most in the older neighborhoods. Frost heave here is relentless. Masonry gate posts that were poured into shallow footings in the 1950s and 60s shift several degrees off-plumb every winter. When a gate sags, the problem lives in the hinge post, not the middle of the panel. We reconstruct posts, re-set hinges, and handle our Gate Parts & Welding in White Plains on site so the gate stays in your yard rather than getting hauled off to some shop.
Gate Realignment
Gate realignment in White Plains runs $180 to $380 for residential swing gates. Salt corrosion and ice build-up on slide tracks, especially from the heavy municipal salting on Post Road and Central Avenue, cause operators to strain against a track that’s no longer straight. The gate binds, reverses halfway, or shudders. We realign the track, correct the post angle where frost heave has moved it, and recalibrate limit switches so the gate closes fully without slamming. This is annual maintenance for many White Plains driveways, especially those with older concrete aprons that have settled.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Plains
We’re certified on nine major gate brands, including Linear, Viking, Ghost Controls, and DoorKing, which covers most of what’s installed across White Plains. We keep common circuit boards, gear racks, loop detectors, and remote receivers on the truck, so we’re not telling you “parts are two weeks out” while your gate sits open. We also install Gate Access Control in White Plains when your system needs an upgrade. Linear operators from the 1990s show up daily in the Highlands. Viking and DoorKing units dominate the commercial parking structures near the Galleria. Whatever is on your gate, we’ve likely got the part or can have it by the next morning.
Common Gate Repair Problems We See in White Plains Homes
- Hydraulic operators seizing in cold snaps. Hydraulic swing-gate operators in White Plains sit in a low valley that traps cold air, and from November through March they stiffen and stall mid-cycle. The fix is usually a fluid flush and seal replacement before the motor burns out.
- Slide-gate tracks packed with ice and road salt. Municipal salting on White Plains streets leaves a brine that eats gear racks and freezes on tracks. Operators strain, limit switches burn out, and gate wheels chew themselves up.
- Frost heave on masonry gate posts. After decades of freeze-thaw cycles, posts in the eastern ZIP codes shift off-plumb a few degrees every winter. You can’t fix a sagging gate until you fix the post.
- End-of-life 1990s automatic operators. The wave of security upgrades from the 1990s left White Plains with hundreds of LiftMaster and Linear operators now 25 to 30 years old. Grinding, stalling, and reversing mid-cycle are the telltale signs. We repair them in place when it makes sense, which is more often than many companies will admit.
Pricing for Gate Repair in White Plains, NY
Here is what White Plains homeowners actually pay us. A basic gate realignment runs $180 to $380. Hinge post reconstruction is $260 to $520. Automatic gate operator repair lands between $220 and $600. Electric gate sensor or circuit board replacement runs $195 to $480. Full custom gate fabrication for high-end properties around Gedney Farm starts higher, and we’ll give you a written number after a free site measure. Every price is quoted and agreed before we touch a single bolt. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote, and if you already have a written estimate from another company, bring it and we’ll give you a free second opinion.
We Also Serve Cities Near White Plains
We regularly cross into the surrounding towns for Gate Repair in White Plains and nearby work, including Hartsdale, Scarsdale, Greenburgh, and Irvington. If you’re just over the border in any of those communities, the same live-person answer, upfront pricing, and 90-Day Done Right Promise apply. White Plains is our home market, but we know these streets well.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in White Plains
Hard freezes in White Plains cause hydraulic fluid to thicken, seals to contract, and swing-gate operators to stall or seize mid-cycle. It’s the most preventable gate failure in this city. We flush the old fluid, replace hardened seals, and in many cases relocate the pump enclosure or add a thermostatic heater where the unit sits exposed. If your gate kept stopping on cold mornings last winter, the fluid and seals are where to start. Call (877) 610-2993 for an inspection before the next freeze hits.
In the Highlands, a gate that reverses before fully opening is usually fighting a track that’s been knocked out of alignment by frost heave, or a loop detector that’s picking up false signals from plow trucks and lifted SUVs. We see it all winter on the steeper driveways up there. We realign the track, reset loop sensitivity for your specific vehicles, and check the limit switches. It’s a same-visit fix in most cases. Call (877) 610-2993 and describe what the gate does, and we’ll tell you what we think it is over the phone.
Usually yes. The grind on a 1990s LiftMaster in Gedney Farm is typically a stripped plastic drive gear or a rusted gear rack, not a dead motor. Replacement parts cost a fraction of a new operator, and the old chassis often has another decade in it. We’ll give you the repair number and, if it doesn’t make sense, we’ll tell you that too, with a written replacement price to compare. Estimates are free.
Yes, and that’s most of our weld work near Battle Hill. The panel itself is rarely the problem. The hinge post has shifted off-plumb from frost heave, or the top hinge has pulled loose, or a weld has cracked from decades of weight and weather. We cut out the bad weld, re-set the post, rebuild the hinge, and reinforce the weak point so the panel hangs true again. Replacing the whole panel is almost never necessary. Call (877) 610-2993 and we’ll look at it before you sign anything.
Yes. We handle the commercial rolling gates, security grilles, and automatic entry gates at the parking structures near the Galleria and throughout the downtown corridor. Those systems need different parts and different scheduling than residential driveway gates, and we carry the Viking, DoorKing, and Linear components those buildings use. We also work with building managers who need gate repairs coordinated around tenant traffic. Call (877) 610-2993 and ask for Hal directly on commercial work.
Contact Gatewood Fence & Gate for Gate Repair in White Plains
If your gate is stuck, sagging, grinding, or waking you up at night, call (877) 610-2993. You’ll reach a live person who works on gates in White Plains every day. We’ll give you a straight answer, a written price, and a time we’ll actually show up. Hal Gatewood’s name is on the shop, and he’s the one who stands behind the 90-Day Done Right Promise. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving White Plains since 2001.