Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across White Plains
A new driveway gate in White Plains typically runs $3,800 to $9,500 installed, depending on whether it’s a single swing, a sliding gate on a track, or a double gate with access control automation. We’re usually on-site in White Plains within an hour of your call, and Hal Gatewood’s crew does the work right in your driveway, not hauled off to some shop. If you’re calling from the Highlands, Gedney Farm, Battle Hill, or anywhere else in 10601, 10605, 10606, or 10607, you’ll reach a live person at (877) 610-2993, not a voicemail.
We’ve been at this since 2001, and we’ve seen what White Plains winters do to gate posts, hinges, and operators, which is why Gate Repair in White Plains is a core part of our work. That local knowledge is why homeowners and condo boards keep our number.
Here’s the thing about Gate Installation: the gate itself matters less than what it hangs on and how it’s powered. A gate sags in the hinge post, not in the middle. That’s where we start every job in White Plains, whether it’s a new install or a replacement.
Why Gatewood Fence & Gate Is White Plains’s Preferred Gate Installation Company
White Plains isn’t just another Westchester zip code to us. We know that the residential neighborhoods off Mamaroneck Avenue and North Street have a different gate stock than the condo complexes lining the downtown Galleria corridor. That means the person who shows up at your house has to know both a 1960s masonry post that’s shifted off-plumb and a 25-year-old LiftMaster control board that’s no longer made. Hal has been training his crew on precisely that mix since 2001.
Our name is on the shop, and the address is published. Hal Gatewood has been owner-operated from day one, and the license number is right there for anyone to look up. That’s not a marketing line. It’s how a neighbor does business. When a White Plains homeowner calls about a gate that won’t close, they get a straight answer, an honest price before any work starts, and a 90-Day Done Right Promise in writing.
Calls are answered by a live person around the clock. Not a call center three states away, not a chatbot. If your gate fails at 11 p.m. on a Friday, a real human picks up the phone. And the pricing is upfront too: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. No haggling required.
Our Gate Installation Services in White Plains
Most of the gate work we do in White Plains falls into four categories. Here’s how we handle each one locally.
Swing Gate Installation
Swing gates are the most common gate type in the residential neighborhoods of White Plains: Gedney Farm, Battle Hill, Highlands, and the pre-war streets around Saxon Woods Road. The challenge here is the freeze-thaw cycle. Shallow masonry posts from original 1950s and 60s construction shift every winter, and by March the gate is dragging or the limit switch keeps tripping. A proper swing gate install in White Plains means setting hinge posts in a deeper concrete footing than the original, and we do that on every new installation. Typical single swing gate installs run $3,800 to $6,200 depending on gate width and material.
Sliding Gate Installation
Sliding gates make sense on the narrow lots and hillside driveways you see throughout the eastern ZIP codes, especially 10605 and 10610, where a swing gate doesn’t have room to open. But White Plains road salt is brutal on slide gate tracks. From November through March, the tracks accumulate ice and salt debris from heavy municipal salting, and rack-and-pinion drives skip or bind. We build slide gate bases with proper drainage and recommend a track cover where the driveway slopes toward the gate. Sliding gate installs in White Plains typically run $4,500 to $8,500.
Driveway Gate Installation
A driveway gate in White Plains is usually the whole system: the gate leaf or leaves, the operator, the safety edges, the keypad, and the loop detector. When we install a new driveway gate, we don’t leave the wiring as an afterthought. In the Highlands neighborhood, we replaced a 1990s LiftMaster swing gate operator on a 3-car driveway where the original post footing had shifted from decades of freeze-thaw cycles. We reset the hinge post in a deeper concrete base, corrected the sag, and installed a new FAAC operator with safety photocells and a loop detector. Then we reprogrammed the keypad entry so the owner didn’t have to reset codes every season. Complete driveway gate systems in White Plains run $5,500 to $9,500.
Pedestrian Gate Installation
Pedestrian gates alongside the driveway are common in White Plains, especially on the pre-war colonials and Tudors near Gedney Farm and Battle Hill where the original side gate has rusted through or the post has shifted. We match the new pedestrian gate to the existing fence line and set the post properly so it doesn’t follow the old one into the ground. Pedestrian gate installs are the most affordable of the bunch, usually $1,200 to $2,800 installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White Plains
A lot of White Plains homes have gates and operators that date back to the 1990s Westchester security boom: LiftMaster, Linear, Viking, Ghost Controls, and DoorKing are the names we see most. We’re certified to service nine major brands, and we stock Gate Parts & Welding in White Plains for the ones we see most often so we’re not waiting on a freight truck when your gate is stuck open. If you’ve got a Linear operator from 1998 that’s still limping along, we’ll tell you honestly whether it’s worth fixing or whether a new Ghost Controls or DoorKing board makes more sense for the money.
Common Gate Installation Problems We See in White Plains Homes
- Frost heave kicks masonry gate posts off-plumb. White Plains sits in a low valley in Westchester County and cycles through hard freezes from November into March. Shallow footings from original construction shift every season, and by early spring the swing gate is misaligned and the limit switches are tripping. We reset posts in deeper concrete bases during installation so they stay put.
- Slide gate tracks clog with ice and road salt. Heavy municipal salting on White Plains streets means slide gate tracks accumulate a crusty mess of ice, salt, and sand from November through March. The rack-and-pinion drives skip or bind, and the gate won’t close properly. We install slide gates with drainage and track protection built in.
- 25-30-year-old LiftMaster and Linear operators are failing in volume. The automated driveway gate boom of the 1990s put a lot of LiftMaster and Linear units into White Plains driveways. Those operators are now at end of life: obsolete control boards, worn gear trains, and parts that aren’t made anymore. That’s the single most consistent repeat-call pattern we see across the city.
- Condo and apartment entry gates from the 1960s-80s urban-renewal era. Downtown White Plains has a dense inventory of mid-rise condos and apartment towers with aging vehicular entry gates at parking entrances. These are commercial rolling and security gate systems, and they need a different install and repair approach than the residential swing gates in the neighborhoods around them.
Pricing for Gate Installation in White Plains, NY
Here’s what gate installation actually costs in White Plains right now. Pedestrian gates: $1,200 to $2,800. Single swing gates: $3,800 to $6,200. Sliding gates: $4,500 to $8,500. Double swing gates: $6,000 to $9,500. Complete driveway gate systems with automation, safety edges, keypad, and loop detector: $5,500 to $9,500. The price is quoted and agreed before any work starts. Not an estimate that balloons at the door. The quote you get on the phone is the price you pay. Call (877) 610-2993 and we’ll give you a real number, not a range that stretches.
Older gates that need retrofitting rather than full replacement are a different conversation. If your 1990s LiftMaster operator has a dead control board but the gate itself is sound, we can often install a new operator and modern UL 325 safety gear for $2,200 to $4,000, which beats a full replacement. If the posts are cracked and the gate panel is rusted through, replacement is the cheaper long-term answer. We’ll tell you which one you’re looking at, and the estimate is free.
We Also Serve Cities Near White Plains
Our crews work all over central Westchester, so if you’re in Hartsdale, Scarsdale, Greenburgh, or Irvington, we’re just as close. The same live-person phone, the same upfront pricing, the same 90-Day Done Right Promise. Whether you’re in White Plains proper or one of the surrounding villages, you’ll get the same straight answer from the guy whose name is on the shop.
Serving White Plains, NY - Our Local Coverage Area
We’re based in the White Plains area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in White Plains
Yes, in most cases we can retrofit UL 325 entrapment protection onto an older gate in White Plains without replacing the whole system. We add safety photocells, contact edges, and obstruction sensing to existing operators, and we keep the work compliant with current safety standards. The gate itself only needs replacement if the structure, hinges, or posts are too far gone. Call (877) 610-2993 and we’ll tell you which situation you have before anyone spends a dollar.
Swing gate posts in White Plains shift because of freeze-thaw cycles. Shallow concrete footings from original construction heave and settle every winter, and after 10 or 20 seasons the post is several degrees off-plumb. During installation, we pull the old footing, dig a deeper base below the frost line, and set the post in a reinforced concrete pour with proper drainage. That’s the only way to stop the cycle. The name is on the shop, and the shop is down the road.
The most common repeat-call pattern is 25-30-year-old LiftMaster and Linear operators installed during the 1990s Westchester security boom. Those units have obsolete control boards, worn gear trains, and bearings that can’t be sourced anymore. By the time the gate won’t close properly, the economical fix is usually a new operator and modern safety gear, not another board swap. We see this pattern weekly across the Highlands, Gedney Farm, and the eastern ZIP codes.
Yes, slide gates in White Plains need different installation prep than swing gates. Road salt, ice, and sand from heavy municipal salting build up in slide gate tracks from November through March, and that debris causes rack-and-pinion drives to skip or bind. When we install a slide gate in White Plains, we build the track base with drainage, set the rail on a proper concrete footing, and recommend a track cover where the driveway collects runoff. Swing gates don’t face the same track contamination.
Gate installation for older condo and apartment complexes near the Galleria corridor in White Plains usually involves commercial rolling gates or security gate systems at parking entrances, many of them original to the 1960s-80s urban-renewal construction. We work with building management to schedule installation around tenant traffic, and we handle the full scope: gate panel, motor, safety edges, access control wiring, and any concrete work. The estimate is free, and the price is agreed before work starts. Call (877) 610-2993 and ask for Hal.
Ready for a Gate That Works? Call the Guy Whose Name Is on the Shop
If your gate in White Plains is sagging, frozen, or simply dead after 25 years of Westchester winters, call (877) 610-2993. You’ll talk to a live person. We’ll give you a real price for gate installation in White Plains, not a range that grows. And we’ll show up when we say we will, fix it right, and put the 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving White Plains since 2001.