Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Everman
Gate access control in Everman means getting a keypad, remote, phone entry, or card reader working on a gate that has probably been hanging since the 1970s, on posts that the Blackland Prairie clay has been shoving around for decades. That is the job nobody trains for in a manual. Hal Gatewood has been doing it since 2001, and he knows what he’s going to find before he pulls up: a post out of plumb, a control board from the pre-UL 325 era, or a February 2021 freeze casualty that never got addressed. If you’re in ZIP 76140 looking for gate access control that actually works on an older Everman gate, call (877) 610-2993 and talk to a live person, day or night.
Why Gatewood Fence & Gate Is Everman’s Preferred Gate Access Control Company
We’re not a faceless outfit flying a tech in from three counties away. Hal’s name is on the shop, his address is published, and his crew drives Everman’s streets every week. We know that a ranch home off Everman Parkway built in 1963 has different gate problems than a newer place on the west side of town. We know which post holes were dug with a post-hole digger and a prayer back in the Kennedy administration, and we know what that means for a keypad retrofit today.
Everman homeowners have leaned on us because we answer the phone, show up in the window we promised, and fix the gate in the driveway instead of hauling it off. Our Gate Access Control team carries parts for LiftMaster, FAAC, BFT, and Linear on the truck, which matters when you want a keypad programmed same-day rather than “we’ll order it and circle back.” Every job carries the 90-Day Done Right Promise in writing. One call brings Hal back if something is not right. That is the deal, plain and simple.
Our Gate Access Control Services in Everman
We handle the full range of access control for gates in Everman, but the reality on the ground shapes the list. Most calls start with an older swing gate that needs a post reset or hinge rebuild before any electronics make sense. The access control comes second, mounted on a gate that finally closes square. Here is what we install and service across the 76140 area.
Keypad Entry
For most Everman ranch homes, a keypad is the biggest quality-of-life upgrade you can make. It ends the “who has the remote this week” argument and lets family, caregivers, or the neighbor feeding your dog get in with a code. We install and program keypads on gates that are hung right, and we will not bolt one onto a leaning post and call it done. That is how you get a keypad that works for one season and then spends the next two binding against the latch. We sell and service LiftMaster, Linear, and FAAC keypads, among others.
Remote Control
We program remotes for the gate you already own, including DoorKing, Viking, Mighty Mule, and BFT. If your 2008 remote finally gave out and the manufacturer stopped making the housing, we can usually pair a compatible transmitter in under an hour. We also handle the common frustration of a remote that worked fine until the gate post shifted and now only opens when you’re practically parked against the gate and holding the button at a particular angle. That is not a remote problem. That is a post problem. We fix both.
Phone Entry
Phone entry systems are common in Everman for a simple reason: the city’s southern edge backs up to light-industrial and commercial uses along the south Fort Worth freight corridor, and a residential street can sit four blocks from a small trucking yard. Phone entry lets a homeowner buzz in a delivery without handing out codes that end up scribbled on a mailbox. We install systems that dial your cell when someone presses the button, and we wire them to operators from FAAC, BFT, and Linear so the gate and the phone talk to each other without a relay fight.
Card Reader
Card readers make sense for Everman properties where multiple people come and go: a multi-generational household, a home with a caregiver, or a small lot where a family member stores a work trailer. We install proximity readers that work with a fob on a keyring, and we can retrofit them onto most existing operators. On a 1970s swing gate with a new post and a new board, a card reader is a clean, durable answer that does not depend on a flip phone from 2009 surviving another north Texas summer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We’re certified to service nine major gate brands, and for Everman customers we keep parts for FAAC, BFT, and Linear on hand specifically because those show up most often on the older residential and light-commercial gates around here. If you’ve got a Viking sliding gate on the south side near the freight corridor, or a Ghost Controls arm on the ranch gate, we service those too. The point is this: we do not pawn off a dead control board on you and tell you to call the manufacturer. We source the part, bring it to Everman, and install it.
Common Gate Access Control Problems We See in Everman Homes
- Posts leaning from clay heave. The Blackland Prairie clay under Everman is a living thing. It swells in wet winters and contracts in dry summers, and a 1960s post set in a coffee-can-sized hole with no concrete cannot fight that. The gate binds, the keypad latch won’t catch, and the operator strains until it trips or burns out.
- Obsolete control boards from the pre-UL 325 era. Before 2000, gate opener boards had no entrapment protection. Those boards are now unsafe and discontinued. We replace them with modern boards that meet current safety codes, and we install safety photocells at the same time.
- February 2021 freeze damage that never got fixed. That storm killed a lot of older gate operators across Everman. Some limped along for a while, opening halfway or failing to reprogram, and now they finally give up. We see this pattern regularly, and we know how to tell freeze damage from a clay-misalignment problem.
- Slide gates jamming near the freight corridor. On Everman’s southern edge, where residential streets run close to heavier industry, slide gates get a different workout. Grit, vibration from truck traffic, and neglected roller tracks all contribute to jams. The fix is usually deep cleaning, track adjustment, and a new limit switch, not a whole new gate.
Pricing for Gate Access Control in Everman, TX
You’ll get the price before any work starts, and that price is the price. Here are the honest ranges for Everman’s market, for the common access control jobs we do:
- Keypad installation or replacement on an existing, properly hung gate: $225 to $495, depending on the keypad model and whether we run new low-voltage wire.
- Remote programming or compatible replacement: $65 to $160 per remote, with multi-remote discounts available.
- Phone entry system installed, wired to an existing operator: $550 to $1,100, depending on line-of-sight and distance from the gate to the house.
- Card reader with two fobs, retrofitted to an existing operator: $400 to $800.
- Control board replacement (post-UL 325 modern board with safety photocells): $550 to $950, part and labor included.
- Post reset on a leaning Everman gate (includes augering, concrete, and remount): $350 to $750, depending on post size and access.
We do not charge a trip fee inside the county. We offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we will give you a written number, not a guess.
We Also Serve Cities Near Everman
Everman sits in a tight pocket of south Tarrant County, and our crew regularly works the surrounding communities too. We’re in Rendon, Kennedale, Forest Hill, and Burleson throughout the week. If you’re just outside the 76140 ZIP and wondering whether we make the drive, the answer is yes. Our service area includes Everman and all the neighboring towns right down to the county line.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Everman
Because Everman sits squarely on Blackland Prairie expansive clay, which shrinks and swells with seasonal moisture swings far more aggressively than the sandier soils found west of here. A post set shallow in Everman will torque out of plumb within a season or two, while the same post in a sandier suburb might stay square for a decade. That is why we set posts deep with proper concrete on every job in the 76140 ZIP. Call (877) 610-2993 if your gate is dragging and we will come look at the post first, because that is almost always where the problem starts.
In most cases you can retrofit, and that is what we push for. A 1970s chain-link swing gate is worth saving if the frame and hinges are sound, and we can mount a modern keypad and operator onto the existing structure. What often needs to change is the hinge post, which was likely set shallow and has leaned. We handle the post reset first, then add the keypad, and you spend less than a full replacement. Call (877) 610-2993 and we will tell you honestly whether your gate is a keeper or a liability.
Could be either, but the freeze is the more likely culprit on an electric opener that died that winter and never recovered. The February 2021 storm killed a wave of older operators across Everman, and many of them limped along with intermittent failures until the limits or the board finally gave out. But if the gate only opens halfway and the post has been leaning for years, the clay heave is also stressing the operator. We diagnose both on-site, and we will not sell you a board if the real fix is a post. Call (877) 610-2993 for a straight answer.
That part of Everman gets a combination of Blackland Prairie clay movement and grit from truck traffic along the south Fort Worth corridor. The ground shifts just enough to pull the track slightly out of line, and the vibration plus dust from passing trucks works its way into the rollers and limit switches. We clean the track, adjust the alignment, and replace the limit switches, and the gate runs smooth again. If it keeps happening, we may recommend a heavier roller set rated for that kind of duty. Call (877) 610-2993 and ask for Hal; he will tell you straight if it is a $200 fix or a $900 fix.
Yes, and this is not optional. Gates built before UL 325 took effect in 2000 often have no entrapment protection, which means no safety photocells and no reversing mechanism if a person or pet is in the path. A gate like that is a genuine safety hazard, and if you have one, retrofitting photocells and a modern control board is the right call. It usually costs less than you think, and it protects you and anyone who uses the gate. Call (877) 610-2993 and we will explain what your gate needs to be code-compliant.
A Word on What We See in Everman
We rehung a sagging 1960s ranch home swing gate off Everman Parkway a while back. The hinge post had twisted a full three inches out of plumb. When we pulled the old post, the reason was obvious: it had been set in a hole the size of a coffee can, with no concrete, somewhere around the time LBJ was in office. Our crew augered a deep footing, set the new post with proper concrete, and remounted the gate before adding a modern LiftMaster keypad entry. Now it opens square and secures without binding. That is the difference between putting a band-aid on a broken leg and fixing the leg. We do the latter, every time.
Call Gatewood Fence & Gate for Gate Access Control in Everman
If your gate access control is acting up, or you want a keypad, remote, phone entry, or card reader that actually works on an older Everman gate, call (877) 610-2993. A live person answers, day or night. Hal’s name is on the shop, and the shop is not hiding behind a call center three states away. Get your free estimate, get the job done right, and get the 90-Day Done Right Promise in writing. That is how we have worked since 2001, and that does not change for anything.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Everman and the surrounding south Tarrant County area since 2001.