Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Everman
Gate installation in Everman runs $1,200 to $4,800 for a typical residential driveway gate, depending on whether you’re replacing a sagging chain-link setup on a 1960s ranch lot or starting fresh with a custom ornamental steel swing gate. Our crews are in Everman every week, and we know the ZIP 76140 soil well enough to set posts that won’t lean by next spring. Call (877) 610-2993 for a free estimate, and you’ll get a written price before any concrete gets poured.
What makes Everman different from the sandier suburbs west of town isn’t the style of gate people want. It’s the ground underneath. The Blackland Prairie clay in 76140 heaves and contracts through every wet-dry season, and a gate post set at shallow depth will bind, drag, or fail to latch within a year. That’s not a guess. We’ve dug enough post holes here to know exactly how deep you go so the gate holds plumb for decades.
Why Gatewood Fence & Gate Is Everman’s Preferred Gate Installation Company
Hal Gatewood has been owner-operating this shop since 2001, and his name is on every invoice. That matters in a town like Everman, where people still ask their neighbor who did their fence before they call a stranger. We publish our address and license number. We answer the phone with a live person at 3 a.m. if that’s when your gate quits. And when we say we’ll be out Thursday morning, the person who shows up is someone whose work you can hold accountable face to face.
Everman homeowners tell us the same story over and over: a national outfit quoted one price on the phone, sent a subcontractor in a rented truck, and left before the gate ever latched right. We don’t run a call center. Hal’s crew is background-checked, uniformed, and they weld on site in your driveway when a hinge post needs reinforcement or a gate frame needs trueing. If something isn’t done right, the 90-Day Done Right Promise is written on your job sheet, not buried in fine print. One call brings him back.
Our 29 years in local fence and gate work means we’ve watched Everman’s housing stock age. Those 1950s through 1980s ranch homes with original chain-link perimeters aren’t like the new subdivisions where builders pre-pour gate footings on fresh compacted fill. Here, we’re usually working around existing concrete walks, buried sprinkler lines, and posts that were set decades ago with maybe a shovel of dry mix if you’re lucky. Knowing what’s underground before we auger is half the job.
Our Gate Installation Services in Everman
We build and install the gate your property actually needs, not whatever’s easiest to haul out and bolt on. These are the four most common installs we handle in Everman, and each one gets treated differently because the soil here treats them differently.
Driveway Gate Installation
A driveway gate in Everman is usually the first real upgrade a homeowner makes to a property that’s had chain-link since the Johnson administration. We fabricate or source the gate to fit your opening, but the critical work happens below grade. On Blackland Prairie clay, we auger post holes to 36 inches and pour proper concrete footings so the gate doesn’t lean when the ground moves. Most driveway gates here run from $1,800 to $4,800 for a single swing or slide setup with manual latch, and closer to $4,000 to $7,500 with automation.
Pedestrian Gate Installation
Pedestrian gates take a beating in Everman’s older lots, mostly because they’re hung on whatever post was already there. When we install a new pedestrian gate, we set a reinforced hinge post independent of the fence line if needed, then use adjustable hinges so the gate swings true even as the clay moves season after season. A basic ornamental steel pedestrian gate runs $500 to $1,500; adding a keypad or electric strike pushes it to $1,200 to $2,500. We match the gate style to your main driveway gate so the property looks intentional, not pieced together.
Sliding Gate Installation
Sliding gates are the right answer for a lot of Everman lots where a swing gate would arc into the driveway or hit a car parked too close. The catch with a slide gate on expanding clay is the track. Set the track supports too shallow and winter moisture swells the clay enough to bind the gear mesh, leaving you with a gate that grinds and stalls. That’s why we pour a deeper, reinforced track base here than we would on sandier ground west of town. Residential slide gate installs run $2,200 to $5,500 manual, $3,800 to $8,500 automated depending on gate weight and operator brand.
Swing Gate Installation
For Everman’s classic ranch homes, a properly hung swing gate is still the cleanest look. The difference between a gate that swings silent for 20 years and one that sags in month eight comes down to three things: post depth below the active clay zone, hinge-post bracing, and whether the hinges are adjustable. We do all three on every swing gate install. Single swing gates run $1,200 to $3,000; double swing gates run $2,500 to $6,000. Every price is quoted and agreed before we start, so the invoice matches the number we shook on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
Hal is certified to service nine major gate brands, and for Everman installs we lean on three that hold up to Texas clay and heat: Viking, DoorKing, and Ghost Controls. We stock common replacement parts for these systems on our truck, so when a limit switch fails or a keypad goes dead, we’re not waiting on a warehouse in another state. That’s the kind of fast turnaround Everman homeowners expect from a shop whose name is on the work.
Common Gate Installation Problems We See in Everman Homes
- Post lean within months. A new gate set with shallow footings doesn’t reach below Everman’s active clay movement zone, so the first wet winter torques it out of plumb and the gate starts dragging. We auger to 36 inches and pour concrete that anchors below the shrink-swell line.
- Rack and pinion binding on slide gates. Winter moisture swells the clay under the track supports just enough to misalign the gear mesh, and suddenly the gate grinds and stalls halfway open. We fix the track base, not just the rack, so it doesn’t come back each season.
- Keypad dead zones from low-set underground operators. Everman’s heavy spring rains pond in low spots, and an operator vault placed there will seep water into the motor housing. We set operators on raised, sloped pads with drainage away from the housing.
- Old hinge posts reused for new gates. A 1960s ranch home with original chain-link has posts that were never meant to carry anything heavier. Swapping a new ornamental gate onto those posts without reinforcing the hinge post means the gate sags in month three. We fix the post first, not the panel.
Pricing for Gate Installation in Everman, TX
Here’s what we actually charge in Everman, not a vague ballpark. A single swing gate with manual latch runs $1,200 to $3,000. A double swing gate runs $2,500 to $6,000. A sliding gate runs $2,200 to $5,500 manual, $3,800 to $8,500 automated. A basic pedestrian gate runs $500 to $1,500. Adding an operator and keypad typically adds $900 to $2,200 depending on brand and gate weight. The two things that move your price are gate size and post depth, and on Everman clay we don’t cut corners on depth. We quote the full number up front, in writing, before any work starts. Standing offers: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Everman
If you live just outside Everman, we cover the same soil and the same housing stock in Gate Installation for Rendon, Kennedale, Forest Hill, and Burleson. The clay doesn’t stop at the city limit, and neither do we. Call (877) 610-2993 and tell us where you are.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Everman
Yes. Everman sits on Blackland Prairie expansive clay, which shrinks and swells dramatically with seasonal moisture swings. In sandier soils west of Everman, a 24-inch footing often holds fine. Here, we auger to 36 inches and pour concrete below the active shrink-swell zone. If you don’t, the gate leans and binds within a single wet-dry season. Call (877) 610-2993 and we’ll tell you exactly what your lot needs.
Yes, in most cases. We saw-cut a channel for the track and pour a reinforced concrete track base without tearing out the entire driveway. The key on Everman clay is pouring that base deep enough that winter moisture swelling under the track supports doesn’t misalign the gear mesh. We’ll quote the pad work as its own line item so you see exactly what you’re paying for.
Usually not without reinforcing the hinge post. Those old chain-link posts were set decades ago, often with minimal concrete, and they were never meant to carry the weight of a steel ornament. We can install a new ornamental swing gate on the same opening, but we’ll almost always set a new, deeper hinge post or brace the existing one. Reusing the old post is how gates sag in month three. Everman is full of these lots, and we know them well. Call (877) 610-2993 for a site look.
You set both hinge posts to 36-inch depth with proper concrete footings, you reinforce each hinge post with bracing, and you use adjustable hinges so the gate can be realigned as the soil shifts over the years. You also don’t hang two heavy gate leaves without a center stop that carries load when both leaves are closed. Most sagging double gates we see in Everman failed because someone skipped one of those steps. We don’t.
Not reliably. Heavy ornamental gates draw more current than a small solar panel can supply, especially on a lot shaded by mature live oaks or a neighboring two-story. We usually recommend a hardwired operator with battery backup for those installs, or a solar setup only if the gate is lightweight and the panel gets full sun most of the day. We’ll be straight with you about what will and won’t work before you spend a dime. Call (877) 610-2993 for an honest assessment.
Contact Gatewood Fence & Gate for Gate Installation in Everman
If you’re in Everman and your gate is leaning, sagging, or you’re ready to replace a chain-link relic with something that looks like it belongs on your property, call (877) 610-2993. You’ll get a live person, a straight answer, and a written estimate before any work begins. Hal Gatewood’s name is on the shop and on the invoice. That’s the oldest accountability there is, and it’s how we’ve done business since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Everman and Tarrant County since 2001.