Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Edmond
Gate access control in Edmond means keypads, remotes, phone entry, card readers, and video intercoms that hold up to Oklahoma clay soil, straight-line winds, and 15-to-25-year-old ornamental iron gates. We repair, install, and upgrade access control on gates across Edmond every week, and we know which operators fail, which keypads quit in February, and which builder-grade boards from the mid-2000s are already obsolete. If your gate won’t open from the street or your keypad stopped accepting codes, call (877) 610-2993 and Hal or his crew will talk you through it. We answer live, and we’re in Edmond regularly, not passing through.
Why Gatewood Fence & Gate Is Edmond’s Preferred Gate Access Control Company
Hal Gatewood started this shop in 2001, and his name is on every invoice. That matters in Edmond, where homeowners in subdivisions like Iron Horse Ranch, Coffee Creek, and Oak Tree have learned the hard way that a gate access system is only as good as the person who installed it and the person who answers when it quits. We’re the company neighbors recommend at the homeowners association meeting, not the one they found in a search ad.
We carry a 90-Day Done Right Promise in writing. If the keypad, photocell, or operator we service acts up within 90 days, one call brings us back. Not a case number, not a supervisor callback. Hal or one of his crew shows up and makes it right.
Dispatch and scheduling for Edmond jobs are coordinated from our Oklahoma City office, but the person in your driveway is local, background-checked, and uniformed. We service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we quote a price, that’s the price. You’ll know it before we turn a wrench.
Our Gate Access Control Services in Edmond
Every access control job starts with the gate itself. A keypad is only as reliable as the post it’s mounted to and the operator it talks to. In Edmond, that means checking hinge post plumb, photocell alignment, and limit switch travel before we touch a wire. Here’s what we handle most days.
Keypad Entry
We install and service keypads on ornamental iron swing gates and slide gates across Edmond’s 73003, 73012, and 73013 zip codes. Most failures we see aren’t the keypad itself. They’re the hinge post behind it. When red clay heaves a post out of plumb, the keypad sits off-angle, the wiring bundle flexes, and intermittent contact with the operator’s limit switches drives homeowners crazy. We fix the post, re-true the gate, and then recalibrate the keypad. Anything less is a short-term patch.
Remote Control
Edmond’s estate-scale properties in northwest and east Edmond often have long driveway runs where remote range matters. We program and troubleshoot remotes for Linear, Viking, Ghost Controls, and DoorKing operators, and we diagnose weak signal issues caused by storm-damaged antenna wiring or relocated receiver boards. If your remote only works when you’re ten feet from the gate, there’s usually a reason we can find and fix without replacing the whole operator.
Phone Entry
Phone entry systems let you buzz a visitor through from your cell phone, which suits Edmond homeowners who travel or whose gate is set back from the house. We install cellular and landline-based phone entry units, wire them into existing operators, and program the relay logic so the gate opens on the first ring, not the fifth. For gates built into HOA-governed subdivisions like those across 73034, we also make sure the phone entry doesn’t conflict with the community’s shared access rules.
Card Reader
Card readers make sense on Edmond properties where multiple people come and go: housekeepers, pool services, ranch hands, extended family. We install and service standalone readers and reader-controller combinations, and we handle the wiring runs that many electricians won’t touch. If a card reader on a dual swing gate in Edmond quits after heavy rain, chances are the loop detector got soaked or a connection pulled loose. We track down the actual cause instead of swapping parts on a hunch.
Video Intercom
More Edmond homeowners are adding video intercom to existing gates so they can see who’s calling before they open. We retrofit camera-equipped intercom panels onto existing keypad posts and tie them into the operator’s control board. You don’t have to replace a working operator to get video. We can usually integrate the intercom with what’s already in the ground.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Edmond
We stock common parts for Linear, Viking, Ghost Controls, and DoorKing operators, which keeps turnaround fast for Edmond customers who don’t want to wait on a parts truck. Hal is certified to service nine major gate brands, and he welds on site, so when a heave-damaged bracket or storm-bent rail needs repair, the gate stays in your driveway instead of riding to a shop.
Common Gate Access Control Problems We See in Edmond Homes
- Heaved hinge posts from red clay shrink-swell. Edmond’s expansive clay soil moves seasonally. Posts in 73003, 73012, and 73034 can shift enough to torque ornamental iron frames and knock keypad entry panels off-angle, which interrupts contact with the operator’s limit switches. We re-set posts with deeper concrete and re-true the gate, because fixing the panel without the post means you’ll fix it twice.
- Wind-bent slide rails and stripped rack teeth. Straight-line wind events of 60-80 mph are an annual occurrence here. They bend slide gate rails and strip rack and pinion teeth, which jams the gate mid-travel and burns out capacitors. After a storm, our first stop is the rail, then the operator.
- Discontinued mid-2000s builder-grade operators. Edmond’s rapid tract-to-custom-home construction of that era left hundreds of automated gates running operators that are now discontinued or short on parts. A failed board or actuator can force a full operator replacement because the part simply isn’t made anymore. We identify these early and quote replacement before you’re stranded.
- Photocell misalignment after wet springs. When the ground swells in April and May, safety photocells that were aligned in August are suddenly pointing at nothing. The result is a gate that reverses for no reason or refuses to close. We check beam alignment before we do anything else, because nine times out of ten it’s the post, not the sensor.
Pricing for Gate Access Control in Edmond, OK
Here’s what access control work typically runs in Edmond. A replacement keypad installed and programmed usually lands between $350 and $750, depending on whether we need to re-set the mounting post. Adding a video intercom to an existing gate runs $900 to $1,800, with the higher end covering long wire runs on estate properties. Phone entry installations run $650 to $1,400. A full operator replacement for a heavy dual swing gate typically falls between $2,200 and $4,500, and that’s when the mid-2000s builder-grade unit has finally given up. Every job is quoted and agreed before we start. You’ll see the number in writing, and that’s the number on the invoice. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Edmond
If you live just outside Edmond, we make runs to The Village, Oklahoma City, Guthrie, and Warr Acres regularly. Our Gate Access Control team handles both the access system and the gate hanging it on, so you’re not juggling two companies. And our Edmond customers know we’re close by when something fails after a storm.
Serving Edmond, OK - Our Local Coverage Area
We’re based in the Edmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Edmond
Because your hinge post is moving. Edmond’s red clay swells when spring rains saturate it and shrinks hard during dry summers, and that cycle can heave a post up to 2 inches out of plumb. A photocell aligned in August points slightly low by April, which trips the fault. We re-set the post with deeper concrete, re-true the gate leaves, and realign the sensors. If you’d like us to inspect your post before buying a new photocell, call (877) 610-2993 and we’ll schedule it.
If the operator labors halfway through its travel, stalls on cold mornings, or trips its thermal overload after a few cycles, it’s likely undersized for the gate. Edmond’s 73012 subdivisions are full of heavy ornamental iron dual swing gates that were paired with operators rated for lighter aluminum panels. We measure the leaf weight and travel distance and compare that to the operator’s duty rating, then recommend whether a capacitor, a gearbox rebuild, or a full replacement is warranted. Estimates are free.
Yes, and we do it frequently. The video intercom panel replaces the keypad housing, and we wire the relay output to the operator’s existing open-command terminals. What matters is whether the current operator has the spare relay capacity and a stable 12V or 24V supply. Most Linear, Viking, Ghost Controls, and DoorKing operators do. If the operator is a discontinued mid-2000s builder unit, some boards won’t accept the intercom’s relay signal cleanly, and upgrading the board solves it. Call (877) 610-2993 and we’ll check your operator over the phone before scheduling.
Straight-line wind and hail bend the rail and knock the counterweight trucks out of line, which makes the gate drag and screech. Hail dents don’t help either. We pull the gate, straighten the rail, true the rack and pinion teeth, and re-align the trucks. In HOA subdivisions across 73034, this is one of our most common post-storm calls, and it’s repairable far more often than people assume. Get a free assessment by calling (877) 610-2993.
Check the wiring where it enters the post. Edmond’s freeze-thaw cycle flexes the conduit and backing plate just enough to crack a solder joint or loosen a terminal screw, and cold shrinks the metal further. It’s rarely the keypad’s membrane or memory. We see this on ornamental iron posts in 73013 and 73012 every winter. If the keypad works after warming but dies again overnight, call us and we’ll repair the connection rather than selling you a new keypad.
Call Gatewood Fence & Gate for Gate Access Control in Edmond
When your gate won’t open, the last thing you need is a phone tree. Call (877) 610-2993 and a live person answers, day or night. We’ll schedule a time that works for you in Edmond, show up in the window we promised, and quote the work before we start. Hal Gatewood has been at this since 2001, and the name on the shop is the name on the invoice. If you’re in 73003, 73012, 73013, or 73034, we’re already in your neighborhood on other jobs this week. Call and get on the schedule.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Edmond since 2001.