Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Edmond
Gate installation in Edmond, OK runs about $1,400 to $6,800 for a typical ornamental iron driveway gate with an automated opener, depending on whether you’re looking at a single swing gate, a double swing, or a slide configuration. Most installations in Edmond take one to two days once materials arrive. We’ve been building and hanging gates since 2001, and we know the ground here. The red clay under Edmond does things to gate posts that concrete poured in other parts of the state simply doesn’t have to contend with. Call (877) 610-2993 and a real person picks up, day or night. No call tree, no voicemail queue. That’s Hal’s rule and it hasn’t changed in over two decades.
Why Gatewood Fence & Gate Is Edmond’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001 and his name has been on the door since day one. That matters more in Edmond than most places. Edmond homeowners in neighborhoods like Oak Tree, Fairfax, and Iron Horse Ranch have been burned by out-of-town outfits that quote one number on the phone and present a different invoice when the work is done. We don’t work that way. The price is written down and agreed to before the first post hole is dug, and the 90-Day Done Right Promise is on the paperwork. If something isn’t right, one call brings us back. No fine print. No “that’s outside the warranty” conversation.
Our crews serve Edmond from our Oklahoma City metro office, and we’re familiar with every major subdivision across 73003, 73012, 73013, and 73034. We’ve installed gates off Covell Road, along Sorghum Mill, and through the gated communities east of I-35. The person who shows up is background-checked and uniformed. You’ll know their name before they arrive. And if you ever want to drive to the shop and look Hal in the eye, the address is published. That’s the oldest accountability there is.
Edmond customers rate us well because we fix what’s fixable before we talk about replacement. A sagging gate in an HOA-governed subdivision off Danforth Road doesn’t always need a new panel. Often the hinge post has heaved in the clay and the footing is cracked underground. Fix the panel without the post and you’ll fix it twice. That’s the kind of repair-first thinking that keeps Edmond homeowners calling us back, and it’s why a lot of our work comes from neighbors telling neighbors.
Our Gate Installation Services in Edmond
Driveway Gate Installation
Driveway gates in Edmond run the full range, from simple single swing ornamental iron gates on brick-pillared entries to heavy dual swing and slide gates on estate lots in far northwest Edmond. Most of what we install in 73012 and 73013 is decorative wrought-look iron with an automated opener, built to match the brick-clad custom homes these neighborhoods are known for. A proper driveway gate here needs a post footing that goes deep enough to get below the active clay zone. In Edmond, that means at least 36 to 42 inches, often with a belled bottom to resist frost and heave. Cut corners on the footing and the gate will sag within two seasons.
Pedestrian Gate Installation
Pedestrian gates in Edmond are common in neighborhoods where the driveway gate is ornamental and the walk-through gate serves daily use. We hang a lot of these in HOA communities where the pedestrian gate has to match the driveway gate’s finish exactly. The same red clay heave that wrecks 16-foot driveway gates also throws a 4-foot pedestrian gate off alignment, except it happens faster because there’s less mass to resist it. A pedestrian gate that drags on the walkway is usually a hinge post that’s migrated half an inch in the clay, not a gate that needs replacing. We weld on site, so most pedestrian gate repairs in Edmond never leave the property.
Sliding Gate Installation
Sliding gates in Edmond are the right call on properties with long driveway runs and nowhere for swing leaves to travel. We see a lot of these on acreage lots off Waterloo Road and in the estate sections of east Edmond where the driveway can be 150 to 300 feet long. A slide gate lives or dies on its track and the operator’s limit settings. The wind out here is the wildcard. A solid infill slide gate is a big sail, and straight-line winds of 60 to 80 mph push hard against the gate frame and the operator’s gear rack. We install slide gates in Edmond with heavier post anchors and wind-rated operators because the storm corridor doesn’t give anyone a pass.
Swing Gate Installation
Swing gates are the most common installation in Edmond, especially dual swing configurations on ornamental iron driveway entries in subdivisions built from the 1990s through the 2010s. A single swing gate is cheaper to build and simpler to automate, but the hinge post carries the entire load. When that post shifts in Edmond’s expansive clay, the gate starts dragging and the operator strains harder every cycle. A dual swing gate spreads the load across two posts, but if one post heaves and the other doesn’t, the leaves won’t meet cleanly in the middle. We’ve seen that exact failure dozens of times in Edmond, and the fix always starts at the post, not the panel. Show me the gate closing on its own and I’ll show you where it’s failing.
Double Gate and Security Gate Installation
Double gates are standard in Edmond’s nicer subdivisions and gated communities, and a lot of the ones we replace were builder-installed package upgrades from the mid-2000s. Those operators have aged out. Security gates in Edmond mean something different than they do in rural counties. Here, it’s usually about controlling access to a long driveway or keeping kids and dogs off a busy collector street, not hardened perimeter defense. We install both styles with the understanding that a security gate that won’t open during a power outage becomes a liability. Every automatic installation we do in Edmond includes a manual release and instruction on how to use it safely.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Edmond
We’re certified to work on nine major gate operator brands, and in Edmond we stock parts for Linear, Viking, Ghost Controls, and DoorKing. That matters when your opener goes down after a windstorm and you don’t want to wait two weeks for a board to ship. The mid-2000s builder-installed operators across Edmond are reaching the end of their service life, and parts for some of those discontinued models are getting scarce. When that happens, we’ll tell you straight: repair what’s repairable, but don’t sink money into an operator that’s obsolete. We’ll show you the replacement options, quote it upfront, and let you decide. No sales pressure. Hal runs the shop like he’s the one paying the invoice.
Common Gate Installation Problems We See in Edmond Homes
- Hinge posts that heave every spring. Edmond’s red clay expands when saturated and shrinks when it dries. A post poured on a shallow footing moves an inch or two each season, dragging the gate and popping hinge bolts loose. The permanent fix is a deeper, belled footing, not another turn on the hinge adjusters.
- Wind-load failures on solid infill gates. A 12-foot solid infill swing gate is a wall. When a 70 mph straight-line wind hits it, the gate frame flexes, the hinges take the load, and the post footing cracks. We replace hinges with heavier barrel styles and reinforce the post connection so the next storm doesn’t do the same thing.
- Operator strain from post migration. When a gate post shifts even half an inch, the operator’s limit switches fall out of calibration and the motor works harder every cycle. Left alone, the board burns out. This is the most common service call we get in Edmond neighborhoods like Fairfax and Ashton Ridge, and it’s almost always traceable to soil movement, not a bad motor.
- Storm-damaged control boards on aging builders’ operators. Many Edmond homes from the mid-2000s got package-deal gate operators installed by the builder. Straight-line wind and lightning events have knocked out more of these boards than anything else, and with parts supply thinning, a board failure often means a full operator replacement. We stock common replacement boards for Linear and DoorKing, but when the board’s gone for good, we’ll tell you instead of stringing you along.
Pricing for Gate Installation in Edmond, OK
Here’s what we see in Edmond’s market, based on current local rates.
- Single swing gate with automated opener: $1,400 to $3,200 installed. The low end covers a modest ornamental gate on existing brick pillars; the high end includes a new steel post, new opener, and safety photocells.
- Dual swing gate with automated opener: $3,500 to $6,800 installed. Wide range because the post work and operator choice move the number. Heavy-duty operators for 18-foot leaves cost more than lighter units.
- Sliding gate with opener and track: $3,800 to $7,500 installed. The long track, heavier operator, and wind-rated posts push this higher than a swing gate on the same property.
- Pedestrian gate: $600 to $1,800 installed. Depends on steel grade, finish, and whether it’s automated.
- Post footing replacement (the fix behind most sagging gates in Edmond): $450 to $1,200 per post, depending on depth and whether we’re pouring a new belled footing in red clay.
The price is quoted and agreed before any work starts. If we find something unexpected underground, we stop, show you, and give you the revised number before we continue. No one drives away with a bigger invoice than the one you approved. Estimates are free, and we offer a free second opinion on any written estimate you’ve received from another company. Bring it over and Hal will look at it honestly.
We Also Serve Cities Near Edmond
Our crews work throughout central Oklahoma. We handle Gate Installation in Edmond, and we regularly serve homeowners in The Village, Oklahoma City, Guthrie, and Warr Acres. If you’re on the edge of Edmond near I-35 or up toward Seward Road, we’re still your local crew. The service area isn’t a hard line. Call and ask; if it’s a reasonable drive from the metro office, we’ll be there.
Serving Edmond, OK - Our Local Coverage Area
We’re based in the Edmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Edmond
Your hinge post is moving in the expansive red clay, not the hinges themselves. Edmond’s soil swells when wet and shrinks when dry, and a post set on a shallow footing will heave an inch or more each season. Adjusting the hinges treats the symptom. The fix is a deeper footing with a belled bottom, sometimes with the post re-plumbed. We’ll come look at it and tell you honestly whether the footing is the problem or whether the gate frame itself has been twisted by wind. Call (877) 610-2993 for a free estimate.
Every automatic gate we install has a manual release lever, usually located on the operator body or on the arm connecting to the gate leaf. Pull the release, then push the gate by hand slowly. Before you do, make sure the gate is not bound against the ground or a post; a gate that’s heaving in clay can be hard to move manually, and forcing it will damage the operator’s gearbox. If the gate won’t move freely when released, leave it alone and call us. Forcing a bound gate is how you turn a $200 fix into a $2,000 replacement. We answer 24/7 at (877) 610-2993.
Usually not. Whole-home battery backup systems often exclude high-draw circuits like gate operators, and even when they’re included, a slide gate motor pulls enough current on startup to drain a residential battery bank quickly. A small dedicated battery on the gate operator is a better plan. We can add one to most existing operators or spec one on a new installation. That keeps the gate operable for the first day of an outage, which is what most Edmond homeowners actually need.
If it’s sudden and total, the control board likely failed, whether from a power surge, a lightning-adjacent strike, or age. Many of the operator models installed by Edmond builders in the 2004 to 2008 boom have limited parts availability now. Some boards are still repairable or replaceable. Others aren’t. We’ll diagnose it, show you the part availability, and give you the repair cost against the replacement cost. You make the call. It won’t be a pressure pitch. Call (877) 610-2993 and we’ll schedule a look.
Yes. Straight-line wind can flex a gate frame enough to bind the hinges, or it can push the gate post just a hair off plumb in saturated clay. Either one makes the operator work harder. The strained sound is the motor pulling more current to move a gate that’s fighting resistance. If you keep running it, the board or the gearbox will eventually fail. Shut the gate off at the breaker if you can, and call us. We’ll come out, find the bind, and fix what’s actually wrong. Same-day service when we can, and we answer the phone around the clock.
Call Gatewood Fence & Gate for Gate Installation in Edmond
If your gate is sagging, storm-battered, or ready for replacement, call (877) 610-2993. A live person answers. We’ll schedule a time, send someone who knows Edmond’s soil and storm patterns, and give you a written price before any work starts. Hal’s name is on the shop and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Edmond and central Oklahoma since 2001.