Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Guthrie, OK
Gate repair in Guthrie typically costs $180-$420 for most hinge, post, and weld jobs, and we usually complete them in one trip. We’re Gatewood Fence & Gate, and Hal Gatewood answers calls at (877) 610-2993 around the clock with a live person, not a voicemail tree. Guthrie’s mix of 1890s Land Run-era wrought iron and wide rural farm gates means no two jobs are the same, and we carry the welding equipment and custom fabrication contacts to handle both.
Why Guthrie Homes Are Different
Guthrie holds one of the largest contiguous National Register Historic Districts in the country, packed with Queen Anne, Second Empire, and Craftsman homes built between 1889 and 1907. A disproportionate share of our calls here involve original hand-forged iron gate hardware from the 1890s through 1910s with hinge pin diameters and strap dimensions no modern manufacturer produces anymore. When a Land Run-era gate starts binding, big-box hardware kits won’t cut it, and most companies won’t even look past the first bracket.
Then there’s the clay. Guthrie sits on heavy red expansive clay that heaves and settles through wet-dry cycles, shoving posts out of plumb and making gate alignment fail even on recent installs. Add Central Oklahoma’s severe thunderstorm seasons with straight-line winds regularly exceeding 60-70 mph, and you’ve got gate frames torqued, post anchors snapped, and seasonal repair cycles that don’t happen the same way in Edmond or Stillwater. We know these streets, and we know how fast a small gate problem turns into a fence problem or a livestock problem.
Gate Repair in Guthrie
Most gate repairs in Guthrie come down to two problems: a hinge post that’s given up in the red clay, or an operator that can’t handle a wide pasture gate at the end of a long gravel drive. We fix both, usually in one trip. The person who answers when you call (877) 610-2993 is a real person in Oklahoma, not a voicemail tree, and we send our own crew with welding gear on the truck.
We cover the full range of Gate Repair work, from historic district iron to acreage pipe gates, and every job carries the 90-Day Done Right Promise in writing.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. In Guthrie’s red clay, post heave through wet-dry cycles is the single biggest reason a gate leaf drifts and binds months after it was installed. We reset posts with deeper concrete collars than the original builder used, and we reinforce the hinge side so the next wet spring doesn’t undo the work. Hinge and post repair runs $180-$420 depending on whether we reset one post or two and how deep the concrete collar needs to go.
Gate Realignment
When a wide farm tube gate at the end of a Logan County gravel drive gets torqued by a 65 mph straight-line wind, the latch stops meeting the post and the gate swings loose. Realignment means more than adjusting the hinges. We check the post plumb, re-square the frame, and adjust the operator limits so the gate closes fully without straining the motor. Gate realignment is typically $120-$280, including operator limit adjustments. Fix the panel without the post and you’ll fix it twice.
Weld & Rust Repair
Rust is a structural problem in Oklahoma, not a cosmetic one. On older wrought iron gates in Guthrie’s historic district, rusted-through strap hinges and cracked welds are common after decades of exposure. We weld on site, in your driveway, so the gate stays put. No hauling a 120-year-old gate to a shop. On ranch pipe gates, we repair cracked welds and reinforce the corner gussets before they fail completely. Weld and rust repair runs $150-$500 based on how much steel needs replacing and how many joints we re-weld.
Electric Gate Repair
Automatic gate operators in Guthrie do more work than suburban ones. They run further, push wider gates, and sit at the end of long drives where the power supply is sometimes solar because running mains would cost a fortune. We service nine major brands, including Viking, Ghost Controls, and DoorKing. When an opener dies, the first thing we do is test the battery and the panel feed before telling you to replace the board. A full operator replacement on a wide farm gate starts around $900 for the unit plus installation, with solar kits adding $350-$700.
How much does gate repair cost in Guthrie?
Most repairs run $180-$420 for hinge, post, and weld work, with electric gate repairs ranging from $150-$500 for board and sensor fixes up to $900-plus for full operator replacement. Every price is quoted and agreed in writing before any work starts. Call (877) 610-2993 for a free estimate.
Can you repair historic iron gates in Guthrie’s Historic District?
Yes. We machine new hinge pins to original diameters and fabricate replacement straps to match existing forged metal, then weld or rivet them in place without disturbing the gate’s historic fabric. This is the exact kind of work we do on Land Run-era properties in Guthrie’s National Register Historic District. Call (877) 610-2993 to discuss your gate.
Gate Installation in Guthrie
A typical gate installation in Guthrie runs between $1,400 and $4,800 for a standard residential driveway gate, while wide rural farm gates with solar operators usually land between $3,200 and $8,500 depending on span, soil work, and power needs. Most jobs are quoted on-site within a day or two and scheduled with a written price before any steel gets ordered. If you need a new gate on a historic home near Broad Street or a long acreage entrance off Highway 33, we measure and spec for the actual conditions, not a catalog photo.
Our full Gate Installation service covers everything from period-appropriate historic district work to heavy-duty rural setups.
Driveway Gate Installation
Most Guthrie driveway gate jobs fall into one of two camps: a decorative steel or wood gate on a mid-century home near Division Street, or a wide ranch-style entrance off a county road where the mailbox sits 300 feet from the house. We measure for both differently. A short residential driveway gets a gate sized to the existing posts and slab. A rural driveway gets a wider span, heavier hinges, and often a solar operator because running conduit a quarter mile costs more than the gate itself. A single swing driveway gate on a mid-century home near the 73044 core typically runs $1,400 to $2,900 installed.
Swing Gate Installation
Swing gates are the most common request in Guthrie’s older neighborhoods, where driveway widths were built for wagons and early automobiles, not three-car garages. We install single and double swing gates with posts set below the freeze line and footings sized for Logan County’s expansive red clay. That clay is the reason so many swing gates here sag after one wet spring followed by a dry August. We account for it from day one instead of hoping the post doesn’t move. A double swing gate for a historic home entry runs $2,500 to $5,500, with the higher end reflecting custom-forged hardware and preservation-appropriate materials.
Sliding Gate Installation
For wider entrances, especially on rural acreage around Guthrie where a swing gate would fight the wind, a sliding gate makes more sense. We install cantilever and track-style sliding gates with heavy-duty steel frames and operators sized to the gate’s actual weight, not a guess. A sliding gate on a farm entrance off Seward Road with livestock behind it needs an operator that can push against a hard north wind. We spec it for that load. A wide rural slide or swing gate with a solar operator and battery backup usually lands between $3,200 and $8,500.
Can you install a modern automatic gate opener on a 1900s-era wrought iron gate in Guthrie’s historic district without damaging the original hardware?
Yes, and it’s work we’ve done before. We mount modern operators using clamp brackets and backing plates that don’t require drilling through original forged iron, and we match new hinge pins to existing strap dimensions instead of forcing a modern part in. The original hardware stays intact, and the gate meets current UL 325 safety standards. Call (877) 610-2993 for a free estimate.
Do you install solar-powered gate openers for rural acreage properties around Guthrie?
Yes, and a large share of our Guthrie acreage installs use solar. We size the panel and battery bank to the gate’s daily cycle count, accounting for Logan County’s cloudy winter weeks, and we install controllers with low-voltage cutoff so the gate never drains itself dead overnight. A solar operator on a farm gate off Highway 33 costs roughly $1,100 to $2,300 over the gate itself. Call (877) 610-2993 to get a written quote.
Gate Motor & Opener in Guthrie
Most gate motor repairs in Guthrie run between $180 and $420, and when your opener dies on a Sunday evening with the gate stuck open, you want somebody who actually answers the phone. That’s us. Hal Gatewood has been fixing gates since 2001, and when you call (877) 610-2993, a live person picks up. We’re in Guthrie regularly, from the Victorian streets of the historic district to the acreage off Seward Road.
Our Gate Motor & Opener service covers repair, replacement, and new installation across all major brands.
Motor Repair
Most motor repairs in Guthrie fall between $180 and $420, and the majority are same-day or next-day fixes. We see a lot of burned control boards on early 2000s operators that got hit by lightning during spring storms, and a lot of limit switch failures from gates drifting out of travel range when the post shifts in red clay. Before we replace anything, we figure out why it failed. Fix the symptom without the cause and you’ll be calling us again in six months.
Motor Installation
A new gate motor installation in Guthrie typically runs $1,200 to $3,800 depending on the gate’s weight, length, and whether it swings or slides. Historic properties almost always cost more because the original gate hardware doesn’t match modern opener brackets, and we end up fabricating adapter plates or custom hinge mounts to mate a 2025 opener to an 1898 gate. We quote the price before we start. You’ll see the number in writing, and it won’t change at the door.
Slide Motor Service
Slide gates are the workhorses of Guthrie’s acreage properties and a few commercial lots along Division Street. A slide motor replacement in Guthrie generally runs $900 to $2,600 installed. The racks and rollers take a beating from red clay dust and the freeze-thaw cycles we get every winter. When a slide gate starts lurching or a motor overheats, it’s usually a worn rack section or a misaligned roller bracket, and those are weldable, on site, without replacing the whole operator. That’s the repair-first philosophy: fix the part that failed, don’t swap the whole system.
Why does my solar gate opener on our Logan County acreage stop working after a stretch of cloudy days?
Usually the panel itself is undercharging. Clouds cut output, and if the panel is angled wrong, shaded by brush, or covered with dust and bird droppings, it never catches up after a cloudy stretch. The fix is often a larger panel, a second panel wired in parallel, or relocating the panel higher and south-facing so nothing blocks it. We’ll test the charge controller and panel output before we touch anything. Call (877) 610-2993.
What’s the best operator for a wide, heavy pipe farm gate at the end of a long gravel driveway?
For a heavyweight pipe gate over 14 feet wide, a linear arm operator from Viking or DoorKing is what we recommend most often in Guthrie. These units push and pull in a straight line, which puts less stress on the gate leaf than a swing arm on a wide span. You’ll also want a high-torque option if the gate is solid pipe, plus a properly sized solar or AC power supply. Call (877) 610-2993 for a spec and quote.
Gate Access Control in Guthrie
Gate access control in Guthrie comes down to one question: who answers the phone before you’ve finished dialing? We’re Gatewood Fence & Gate, and we’ve been answering our own phone around the clock since 2001. When your keypad quits at 9:30 on a Tuesday night with your car stuck on one side and your house on the other, a live person picks up. Hal’s crew covers Guthrie regularly, including the historic district and the acreage edges of Logan County.
Our Gate Access Control service includes keypads, remotes, phone entry, and card reader systems, all quoted upfront and installed with proper grounding and surge protection.
Keypad Entry Systems
A keypad with dead batteries in Guthrie’s summer heat isn’t just an inconvenience; it’s a security risk. We replace or retrofit keypads on gates all over the 73044 area, from newer subdivisions off Highway 33 to rural acreages with older slide gates. Most keypad replacements run $250-$480 installed, wired or wireless, programmed to your existing opener. We test every code you want, including temporary codes for delivery drivers and guests.
Remote Control Systems
Older remotes from DoorKing or Linear sometimes fail in Guthrie’s freeze-thaw cycles, especially when transmitters sit in a truck console all winter. We sell, program, and install replacement remotes and receivers, usually between $85-$185 per remote depending on the brand and rolling-code encryption. We’ll also disable remotes that went missing after a break-in or a moving crew, so an old remote doesn’t grant access to the wrong person.
Phone Entry Systems
A phone entry system at a front gate in Guthrie lets you buzz visitors through from your cell, without walking to the gate in the rain. These installs typically run $700-$1,400 including the control board, wiring, and programming. We hardwire power properly and connect the unit to your cell service. No Wi-Fi dependency, no button that goes dead when the router blinks. In a historic district with original brick pillars, we often fabricate custom mounting brackets so nothing gets drilled through period masonry.
How fast can you get to a gate access emergency in Guthrie?
For an access failure where the gate won’t open and vehicles are stuck, we’re usually on scene within 60-90 minutes in Guthrie proper and within two hours on the acreage edges of Logan County. Call (877) 610-2993 and a live person answers immediately, even at 3:00 a.m.
Do you come out for historic gate hardware that needs both welding and new electronics?
That’s most of what we do in Guthrie, honestly. An original Victorian gate usually needs the iron repaired and realigned before any new keypad or reader can work properly. Since we’re the same crew that handles Gate Parts & Welding in Guthrie, you don’t need two companies juggling one job. We fix the metal first, then mount and program the access equipment so the gate operates smoothly and reports correctly. Call (877) 610-2993.
Gate Parts & Welding in Guthrie
If you’ve got a sagging ornamental gate on a Victorian home in Guthrie’s historic district or a wind-torqued farm gate on the edge of Logan County, we can fix it without hauling the thing off. Most gate repairs in Guthrie start around $180 to $340 for hinge and post work, and we weld on site so the gate stays in your driveway. Hal Gatewood has been at this since 2001, and the name on the shop is the same name on every invoice.
Our Gate Parts & Welding service covers everything from custom forged hinges to post replacement and rail repair.
Hinge Replacement
Original cast-iron hinge straps from the 1890s crack under wind torque, especially when a modern operator gets retrofitted onto a gate that was never designed for it. In Guthrie’s historic district, those strap hinges use non-standard pin diameters, often 7/16-inch or weirder, that no big-box store stocks. We either fabricate a matched replacement or source from a forge that works in period dimensions. A standard hinge replacement on a mid-century ranch gate in Guthrie runs $90 to $180 per hinge, while a custom forged strap hinge for a historic property runs $220 to $400.
Post Replacement
Logan County sits on heavy red expansive clay. Wet-dry cycles through spring and summer make posts heave, drift, and throw heavy ornamental gates out of plumb. When a post moves, we don’t just shim the gate. We pull the post, inspect the footing, and often pour a deeper set with concrete mixed for expansive soil. Post replacement in Guthrie runs $200 to $500 per post for standard steel or wood, and more if you’re in the historic district where the post must match period materials or conceal modern anchors.
Custom Welding
This is the heart of what we do in Guthrie. When a 1910 Craftsman-era wooden gate has iron strap hinges that sheared, we forge a matched replacement and weld a new leaf onto the existing post footing. When an ornamental panel cracks, we weld it on site, grind it smooth, and match the finish so the repair doesn’t look like a patch. Custom welding for gate work in Guthrie runs $150 to $600 depending on fabrication time, material, and whether we’re forging original-style hardware. We quote the price up front, and it’s the price on the invoice.
Can you fabricate a matching replacement hinge for a 1910 Craftsman-era wooden driveway gate in Guthrie’s historic district?
Yes. We’ve fabricated matched replacement hinges for Craftsman-era wooden gates throughout Guthrie’s historic district, including one 1903 Queen Anne property where the original 7/16-inch hinge pin had no modern equivalent. Our crew hand-forged a matched replacement, welded a new leaf onto the existing post footing, and the gate has swung silently since. Expect $220 to $400 for a custom forged hinge depending on strap length and profile. Call (877) 610-2993.
My ornamental swing gate in Guthrie sags every spring. Is the problem the gate panel or the hinge post?
In Guthrie, it’s almost always the hinge post. The red expansive clay under Logan County heaves and drifts through wet-dry cycles, pulling the post out of plumb and letting the gate bind and sag. The panel is usually fine; the post footing is the root cause. We pull the post, inspect the footing, and reset it so the gate swings true again. Fix the panel without the post and you’ll fix it twice. Call (877) 610-2993.
Brands We Service in Guthrie
We stock parts and carry factory training for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most common repairs in Guthrie use parts we already have on the truck, and what we don’t stock arrives by next business day through our Oklahoma City supply chain. We also carry universal retrofit kits for obsolete operators that manufacturers no longer support.
Pricing for Gate Repair in Guthrie, OK
| Service | Typical range in Guthrie |
|---|---|
| Hinge & post repair | $180-$420 |
| Gate realignment | $120-$280 |
| Weld & rust repair | $150-$500 |
| Operator replacement (farm gate) | $900+ |
| Solar kit addition | $350-$700 |
| Single swing driveway gate (installed) | $1,400-$2,900 |
| Double swing historic gate (installed) | $2,500-$5,500 |
| Wide rural gate with solar operator | $3,200-$8,500 |
| Motor repair | $180-$420 |
| Motor installation | $1,200-$3,800 |
| Slide motor replacement | $900-$2,600 |
| Keypad replacement | $250-$480 |
What moves the price in Guthrie is the gate’s age and weight, whether we’re adapting 1890s hardware or working with modern posts, and how far the power run needs to go on rural acreage. Every quote is written and agreed before any work starts, and we don’t add trip charges inside Logan County.
Neighborhoods We Serve in Guthrie
Our trucks are in and out of Guthrie all week. Typical response time for a repair call inside the 73044 ZIP is same-day or next morning, depending on when you call and what the storm did the night before.
- Historic District / Downtown - Victorian, Queen Anne, and Second Empire properties with period iron gates
- East Noble corridor - mixed mid-century and newer builds with driveway openers
- West Guthrie near Industrial Road - acreage properties, pipe gates, and farm entrances
- Guthrie Proper - residential and small commercial along Division Street and Highway 33
- Seward Road area - rural acreage with wide spans and solar operators
Service Area - Cities Near Guthrie
We dispatch and schedule from our Oklahoma City office, and crews serve Guthrie, OK locally along with Edmond, OK, Piedmont, OK, The Village, OK, Oklahoma City, OK, and Warr Acres, OK. No trip charge inside Logan County.
Serving Guthrie, OK - Our Local Coverage Area
Gatewood Fence & Gate crews serve Guthrie and the communities around it; dispatch is coordinated from our Oklahoma City office. The map shows the Guthrie coverage area; if your address is on it, we can help.
Also serving nearby: Guthrie, OK, Edmond, OK, Piedmont, OK, The Village, OK, Oklahoma City, OK, Warr Acres, OK.
FAQs About Gate Repair in Guthrie
Most residential gate repairs in Guthrie don’t require a permit, but new installations and any work that modifies a fence line along a public right-of-way may need Logan County or city approval. Historic District properties have additional preservation guidelines for visible alterations. We can tell you exactly what’s needed when we see the gate, and we’ll note any permit requirements in your written quote. Call (877) 610-2993.
For standard repairs inside the 73044 ZIP, we usually offer same-day or next-morning service depending on call time and weather conditions. Emergency access failures where the gate is stuck open or vehicles are trapped get priority response, typically 60-90 minutes in town and up to two hours on rural acreage edges. A live person answers (877) 610-2993 24/7.
Yes. We regularly service rural acreage and farm entrances throughout Logan County, including properties well outside the Guthrie city limits. The same pricing, same 90-Day Done Right Promise, and same no-trip-charge policy apply anywhere inside the county. Call (877) 610-2993 and we’ll confirm your location and schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Guthrie Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond