Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Edmond
Gate repair in Edmond usually means one of three things: a gate that sags and drags, an opener that groans or trips, or a post that has moved so far the latch won’t catch. We fix all three and everything in between, and we do it on-site in your driveway, not hauled back to a shop. Call (877) 610-2993 and a live person answers, day or night. Hal Gatewood has been at this since 2001, and the name on the shop is the name on every invoice.
Edmond is home turf for us. We know the brick-clad customs off Covell, the gated estates in Oak Tree, the mid-2000s subdivisions off Boulevard and Kelly. That local knowledge matters because a gate in Edmond behaves differently than a gate in Warr Acres or The Village. The clay soil here heaves, the wind loads are real, and the operators builders installed in 2006 are failing on a schedule. We plan for all of it.
Why Gatewood Fence & Gate Is Edmond’s Preferred Gate Repair Company
We’re the Gate Repair team homeowners call when a national outfit quoted one number and then switched it at the door. That doesn’t happen with us because we quote the price before any work starts, in writing, and we stand behind it. The 90-Day Done Right Promise is printed on every invoice: if it’s not done right, one call brings Hal back. That’s not a fine-print guarantee. It’s the deal.
We’re locally owned and owner-operated. Hal Gatewood’s address is published, his license number is public record, and the person who answers your call at 3 a.m. is one of us, not a call center three states away. We’re background-checked, uniformed, and certified to service nine major gate brands including Viking, Ghost Controls, DoorKing, and Elite. When you see our truck roll up on your street in Edmond, the guy behind the wheel knows what he’s doing.
Edmond customers call us back because we show up in the window we promised. Response time here is fast, often same day for urgent calls, because we keep a local presence and local parts stock. A hanging gate across a driveway isn’t just a nuisance. It’s an open invitation. We treat it that way.
Our Gate Repair Services in Edmond
Electric Gate Repair
Electric gate repair in Edmond runs the gamut from a fried control board to a limit switch that drifted out of calibration after a spring storm. We work on more operators across 73003, 73012, and 73034 than most shops see in a year. If your gate opens but won’t close, or closes and then bounces back, the cause is usually a sensor, a loop detector, or a board under stress from the constant heaving of clay soil moving posts out of alignment. We don’t guess and throw parts at it. We test, diagnose, and fix the actual fault, then set the travel limits and force settings so the operator isn’t fighting the gate.
Automatic Gate Repair
Automatic gates in Edmond work harder than they should. The soil here shrinks in August and swells in April, and every shift of the post changes how the gate sits on the hinges. That puts extra load on the operator with every cycle. We fix operators from Ghost Controls, Viking, DoorKing, Elite, and more, and we always check the mechanical side before touching the motor. Show us a gate closing on its own and we’ll show you where it’s failing. Most automatic gate problems start as mechanical problems that went untreated. Fix the post, realign the gate, relieve the operator. That’s the order we follow.
Hinge & Post Repair
This is Edmond’s signature repair. The expansive red clay under this city expands and contracts so aggressively that gate posts heave out of plumb by inches in a single season. A gate sags in the hinge post, not the middle, and that’s where we start. We excavate the post, set a deeper concrete footing with rebar, rehang the gate with proper clearances, and weld any torn hinge saddles on-site. Fix the panel without the post and you’ll fix it twice. We’ve seen plenty of sloppy work from other companies that did exactly that.
Gate Realignment
Realignment is often the first step in any Edmond swing gate repair. Eyeball the top rail against the fence line and if it dips toward the latch post, the hinge post has moved. We realign the gate’s plane of travel, shim or reposition hinges as needed, and reset operator travel stops. On heavy custom ornamental iron dual swing gates, like the ones common in Oak Tree and across the estate lots of east Edmond, realignment has to be dead-on or the photocells and loop detector will never work reliably again. We do it with levels, lasers, and patience, not a come-along and a prayer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Edmond
We’re certified on nine major gate brands and we keep parts for Edmond’s most common ones close by. That includes Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. When a mid-2000s operator finally gives up, we’ll tell you straight whether it’s a board swap or a full operator replacement. We don’t sell parts you don’t need. The shop is stocked for same-week repairs on most of these brands, and if a part has to be ordered, we’ll give you a real timeline, not a shrug.
Common Gate Repair Problems We See in Edmond Homes
- Posts heaving from Edmond’s shrink-swell clay. The single biggest cause of sagging gates here. Post migrates, hinges bind, operator burns out trying to force the gate through a stop it can’t reach. We see it every spring after the rains soak the 73003 and 73034 subdivisions, and every August when the ground bakes dry.
- Wind damage from Oklahoma straight-line storms. Sixty and seventy mile per hour gusts bend gate frames, shear hinge bolts, and snap weld points on long driveway runs. After every severe weather season, our phone rings with gates that won’t close square anymore.
- Dead operator boards from the mid-2000s buildout era. Many Edmond builders installed automated gates as a package upgrade between 2003 and 2010. Those operators are now obsolete. What starts as a board replacement often ends as a full operator swap because the parts simply aren’t made anymore. If you’re in an Edmond subdivision built in that window, this will find you eventually.
- Weld fatigue and rust on ornamental iron. Edmond’s swings between wet springs and parched summers, plus road salts and sprinkler overspray along driveway approaches, accelerate rust at the weld joints. We weld on site, grind, prime, and paint so the patch matches the gate, not the invoice.
Pricing for Gate Repair in Edmond, OK
Here’s the honest picture of what gate repair costs in Edmond, based on the calls we run every week.
- Hinge & post repair: $295-$650 depending on post size, depth of excavation, and whether new concrete footings are required.
- Gate realignment: $180-$420 for most swing gates, more for heavy dual swing systems on estate properties.
- Electric / automatic gate operator repairs: $220-$580 for board swaps, limit switch replacement, sensor recalibration, and wiring repairs. Full operator replacement runs higher and we quote it line by line before any work starts.
- Weld and rust repair: $120-$350 depending on the number of joints and access.
Every quote is agreed before work begins. No trip charge inside the county. $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number over the phone, for free.
We Also Serve Cities Near Edmond
Beyond Edmond, we run calls into The Village, Oklahoma City, Guthrie, and Warr Acres. If you’re a few miles outside the city limits, call anyway. We know that whole area and we’ll tell you straight whether it’s in our wheelhouse. For Edmond proper, we’re the team that knows the neighborhoods, the soil, and the storm patterns. Gate Repair in Edmond is what we do every day.
Serving Edmond, OK - Our Local Coverage Area
We’re based in the Edmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Edmond
Because the hinge post is moving. Edmond’s expansive red clay soil shrinks and swells enough to push a post out of plumb by an inch or more in a year. Tightening the hinges doesn’t fix a moving post, and the sag returns every time the soil goes through a wet-dry cycle. The permanent fix is excavation and a deeper, properly reinforced concrete footing. That’s the repair we do most often in Edmond, and it’s the one that actually holds. Call (877) 610-2993 for a free assessment.
Oklahoma straight-line winds in the 60 to 80 mph range bend gate frames, shear hinge bolts, and damage operator wiring and control boards. On long driveway runs common to Edmond estate lots, a big gate acts like a sail. After every major storm season we see gates that won’t close square, operators that trip their overload, and photocells knocked out of alignment. If a storm just came through and your gate is acting up, call (877) 610-2993. We’ll inspect the damage and quote the fix before touching anything.
Usually not, and we’ll tell you that straight. Many Edmond homes built between 2003 and 2010 got gate operators installed by the builder using brands that have since been discontinued. Once the control board fails on those, the parts are scarce or gone entirely, and you’ll spend more chasing a dead platform than replacing it. Hal will give you the honest call. If a board is still available and the operator is sound, we’ll swap it. If not, we’ll quote a replacement and install it properly. Call (877) 610-2993 for a free second opinion on any written estimate you already have.
Yes. Gate systems in Edmond must meet UL 325 safety standards, which means functioning entrapment protection: approved photoelectric sensors, reverse sensing, and proper warning signage on automated gates. If your gate lacks working safety edges or photocells on a residential driveway gate with operator access, we’ll flag it and fix it as part of any repair. This isn’t a paperwork formality. A 600-pound gate with no entrapment protection can seriously hurt someone. We treat every opener service as an opportunity to make the gate safe, not just running again.
Generally less, but not zero. Slide gates ride on a track or cantilever system, so they don’t hinge on a post the way a swing gate does. But the ground movement still shifts the track, the catch post, and the operator platform. In Edmond’s wet springs, a ground-track slide gate can bind or jump the rail if the track bed has shifted even a quarter inch. Cantilever systems tolerate soil movement better, but they still need laser-level rail alignment. If your slide gate is grinding or binding, call (877) 610-2993 and we’ll check the track, the rollers, and the operator mounts in one visit.
Get Your Edmond Gate Fixed Right
If your gate is dragging, groaning, or refusing to close, call us today at (877) 610-2993. We’ll answer with a live person. We’ll give you a straight price before any work begins. And if it’s in Edmond, we’ll probably be there the same day for urgent repairs. Free estimates, upfront pricing, and the 90-Day Done Right Promise in writing on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Edmond, OK.