Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Round Rock, CA | Gatewood Fence & Gate
We repair Ghost Controls gate operators across Round Rock, and we do it as an independent service provider, not a manufacturer arm. The thing that makes our Ghost Controls work different here is simple: on Round Rock’s Blackland Prairie clay, most “dead” Ghost Controls motors are actually good motors fighting a post that has leaned two inches out of plumb. We fix the post first. Call (877) 610-2993 for a free estimate on any Ghost Controls gate issue in Round Rock.
Why Round Rock Residents Choose Us for Ghost Controls Service
We’ve been working on Ghost Controls operators since the AXS series first started showing up on Round Rock driveways in the mid-2000s. Hal Gatewood got his start at Los Angeles Trade-Technical College, then spent years in the field learning what the classroom never quite covers, like why a gate that swung fine in February starts dragging every August when the ground shifts. That’s the same lesson Round Rock teaches, just on clay instead of Valley hardpan. Our crew has run Ghost Controls Ghost Controls sales & service calls on hundreds of these systems across Williamson County, and we know which boards fail after lightning, which actuators bind after a hard freeze, and which torque dials got cranked by the last guy who “fixed” it with a YouTube video. We carry OEM Ghost Controls control boards, receivers, and actuators on the truck, and we answer the phone with a live person, not a voicemail. Every job comes with our 90-Day Done Right Promise in writing.
Common Ghost Controls Gate Repair Problems We Solve in Round Rock
Here’s what we actually see on Ghost Controls gates in Round Rock, and how Round Rock Gate Repair is usually different from what the manufacturer’s troubleshooting guide says.
- Linear actuators that seize or bind. When a Round Rock summer pushes steel gate frames past 100°F and the frame expands, an actuator that was working in April starts straining by July. On clay soil the issue compounds: the post shifts, the gate leaf drags on the driveway, and the Ghost Controls linear actuator pushes until the control board faults. We align the leaf and post first, then re-set the torque limit so the actuator isn’t fighting a gate that’s out of square.
- AXS-series control boards that fail after lightning or surges. Central Texas storms move fast and hard. A Ghost Controls AXS board on an unprotected Round Rock driveway takes a nearby strike or a transformer surge and goes dark, no LED, no remote pairing. That’s a board replacement, and we’d rather put in a Ghost Controls OEM board than an aftermarket one that won’t talk to your existing remotes.
- Torque-limit dials mis-set after a previous repair. We see this on AXP and TDS units where somebody else adjusted the dial to “fix” a binding gate instead of fixing the gate. Now the operator’s too weak to close fully, or too strong and it’s grinding the hinge. We re-set it to spec after we fix the actual binding problem.
- Keypads and plug-in receivers that fail intermittently. Round Rock’s dust plus winter ice events are rough on exposed Ghost Controls keypads and plug-in receivers. Moisture gets in around the gasket, dust packs into the contacts, and the keypad works on Tuesday but not Thursday. We clean, re-seal, and replace the receiver if the board’s corroded past saving.
- Ghost Controls operators on subdivision entry gates in Teravista and similar HOA communities. Those entry systems run hundreds of cycles a day in summer. The actuator wears faster than a residential driveway unit, and when a post shifts, the whole operator works harder every cycle. We do the structural realignment first, then address the operator.
Ghost Controls Service in Round Rock: What Local Conditions Mean for Your Equipment
Here’s a fact about Round Rock that doesn’t apply the same way in Austin or Georgetown or Cedar Park, and it changes how Ghost Controls repair work plays out here. Round Rock’s residential landscape is overwhelmingly dominated by master-planned HOA communities built during the 1990s through 2010s, neighborhoods like Paloma Lake, Stone Canyon, and Teravista, where ornamental iron driveway gates are near-universal. The region sits on Blackland Prairie expansive clay soil. That clay heaves when it’s wet and contracts hard during drought. The posts under those ornamental iron gates have been moving for 20-plus years now. When we get a call on a Ghost Controls gate in Paloma Lake that “stopped working,” the operator is usually fine. The post has moved one to three inches off vertical since the gate was installed, the leaf binds against the driveway or the other leaf, and the motor faults out trying to push through it. If somebody just swaps the board or actuator without fixing the post, you’ll be calling again after the next wet season. That’s why concrete pier re-setting is the first repair step on a large share of our Ghost Controls calls in Round Rock, not an afterthought. We have the on-site welding gear and the concrete experience to do that work in your driveway, so your gate doesn’t leave your property.
Ghost Controls Models & Products We Service in Round Rock
We service the Ghost Controls AXS Series, AXS1, AXS2, and AXS3, the AXP Series including AXP1 and AXP2, the TSS1 and TSS2 torque-limited actuators, and the TDS Series TDS1 and TDS2 heavy-duty operators. That covers single swing gates, double swing ornamental steel driveway gates, and the subdivision entry systems on Teravista and other HOA communities throughout Gate Installation - Round Rock. When your Ghost Controls system is under serviceable age and the frame is still square, we use OEM control boards, receivers, and actuators, because aftermarket boards often refuse to pair with existing Ghost Controls remotes. When an AXS board is lightning-damaged or the actuator is age-degraded, we tell you straight if a new Ghost Controls kit costs less than a board plus actuator plus post repair. Sometimes it does. We’d rather tell you before we sell you something.
Ghost Controls Service Pricing in Round Rock
Ghost Controls gate repair in Round Rock typically runs this way: a service call inside Williamson County carries no trip charge. Basic diagnostics and small adjustments like torque-limit re-setting or remote re-pairing usually fall between $95 and $180. A Ghost Controls control board replacement, including the part, runs about $200 to $390 depending on the model. Full linear actuator replacement with labor typically lands between $280 and $520. If the post has shifted and we need to cut and re-pour a concrete footing, realign the leaf, and re-weld hinge brackets, that’s a structural repair and usually runs $450 to $1,150, depending on the size of the post and the gate leaf. You get the price in writing before any work starts, and you approve it before we touch anything. Call (877) 610-2993 for an exact quote on your Ghost Controls gate in Round Rock, estimates are free.
Key Takeaways
- We’re an independent Ghost Controls service provider, not manufacturer-affiliated or authorized.
- Most “broken” Ghost Controls gates in Round Rock need post realignment before any new parts.
- We use OEM Ghost Controls boards, receivers, and actuators when the system is still worth repairing.
- On-site welding and concrete work happen in your driveway, not at a shop across town.
- Every job carries the 90-Day Done Right Promise in writing.
Serving Round Rock, TX - Our Local Coverage Area
We’re based in the Round Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Round Rock
Your gate post is moving. Round Rock sits on Blackland Prairie expansive clay that swells when wet and shrinks in drought. When heavy rain comes, the clay expands, the post tilts out of plumb, and the gate leaf binds against the driveway or the other leaf. The Ghost Controls operator isn’t failing, it’s being asked to push a gate that’s no longer square. We fix it by re-setting the post and rewelding the hinge brackets, then re-setting the operator’s torque limit. Call (877) 610-2993 and Hal will tell you if it’s the post or the motor.
Yes. That’s most of what we do in Stone Canyon. A post that’s visibly leaning has usually moved enough that the Ghost Controls actuator is working against a bound leaf, and simply swapping the operator will not last. We cut and re-pour the post footing to plumb, weld the hinge brackets to drop the leaf back onto its centerline, and then re-set the operator torque to spec. The gate stays in your driveway the whole time.
It does. We weld on site. That means cracked hinge brackets, sagging ornamental steel leaves, and broken weld joints on Ghost Controls gates get repaired in your driveway, not hauled to a shop. A gate sags in the hinge post, not in the middle, and that’s where Hal starts.
On Teravista entry gates, the most common Ghost Controls failure is operator wear from cycle volume, often made worse by a post that has shifted and is loading the actuator unevenly every cycle. We see torque-limit dials that have been cranked up to compensate for a binding leaf, which then accelerates the wear on the actuator and the hinge. The repair starts with realignment, then torque re-set, then actuator replacement only if it’s actually worn out. Call (877) 610-2993 for a free estimate.
Yes. We handle Ghost Controls operator integration with video intercoms, keypads, and phone entry systems on residential driveways and subdivision entry gates across Round Rock. We run the power and signal wiring, mount the equipment, and program the operator to work with the new access system. We’ll give you a written price before any work starts. Call (877) 610-2993 to talk through what you need.
Service Areas Near Round Rock
Beyond Round Rock, we serve nearby Williamson County and Travis County communities. You’ll find us running Ghost Controls service in Los Angeles, San Francisco, Sacramento, Fresno, Long Beach, and Riverside, and for readers further west we also cover Ghost Controls service in Seattle and Ghost Controls service in Vancouver. Our full Round Rock service area page lists every ZIP we cover, including 78682, 78683, 78664, and 78665.
Book Your Ghost Controls Service in Round Rock Today
Call (877) 610-2993 and you’ll get a live person, not a voicemail. We’ll set a time, show up in the window we promised, and give you a written price before any work starts. If it’s an emergency, we can often be at your Round Rock gate the same day. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Round Rock since 2001.