Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Andover
Gate motor repair in Andover typically runs $180 to $340 for a service call and common parts replacement, and we can usually have someone at your home within a few hours of your call. If your gate is grinding, stuck open, or refusing to close, the problem is rarely the motor alone. It’s usually moisture in the control board, a rusted hinge post loading down the operator, or worn hardware from decades of salt air. We’re Gatewood Fence & Gate, and we’ve been fixing gates in Broward County since 2001. Call (877) 610-2993 and Hal or one of his crew will answer.
Why Gatewood Fence & Gate Is Andover’s Preferred Gate Motor & Opener Company
Andover’s 33023 corridor is dense with HOA-governed townhome and villa communities, nearly all of them running an automated vehicular gate at the entrance. That means one thing for us: we know these gates intimately. We know which operators the 1990s communities were built with, which control boards fail first in South Florida humidity, and which post footings on 1960s concrete-block homes are shot. When you call us from Andover, you’re not explaining your neighborhood to a stranger. You’re talking to someone who has likely driven down University Drive or waited at one of those gates himself.
People in Andover hire us for the same reason they’d hire a mechanic who has worked on their neighbor’s truck for a decade. We show up when we say we will. We answer the phone with a live person, 24 hours a day. The price Hal quotes you is the price you pay, agreed before any work starts. And every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. Hal’s name is on the shop and on every invoice, and he has been at it since 2001. That’s the kind of accountability you don’t get from a company that sends a different subcontractor every month.
Our Gate Motor & Opener team services nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for most of those brands and can often complete a repair in one trip. We’re background-checked and uniformed, and we treat your gate like it’s the one on our own driveway.
Our Gate Motor & Opener Services in Andover
Motor Repair
Most calls from Andover start with a gate that won’t open, or opens halfway and quits, or makes a sound like a coffee grinder. The operator is usually not the first thing we replace. We check the control board for moisture intrusion, test the safety photocells, and look hard at the hinge post and hardware. A gate that sags binds the motor and burns it out. Fix the motor without the post and you’ll fix it twice. We repair first, and we’ll tell you plainly when a motor is beyond saving. A typical motor repair in Andover runs $180 to $340 depending on what we find.
Motor Installation
When a motor genuinely has to go, we install a replacement sized for your gate’s weight and length. In Andover’s townhome communities, that often means a slide gate motor with enough torque for a steel panel that’s been absorbing salt air for twenty years. For the older 1960s-era swing gates off University Drive, we’re more likely to spec a swing arm operator from Viking or Elite. Installation in Andover typically runs $450 to $900 including labor, but we always give you a written price before we start. No surprises at the door.
Linear Motor Service
Linear arm operators are common on Andover driveway gates, especially the ornamental wrought-iron swing gates on the older concrete-block homes in 33023. These motors work well when the gate is hung right, but they can’t push through a sagging hinge post. We service Linear-brand arms as part of our regular repair work, and we’ll tell you when the motor is fine and the hinge geometry is the real problem. That’s the difference between a one-day repair and a six-month repeat call.
Slide Motor Installation & Repair
Slide gates dominate the townhome and villa entrances throughout Andover, and they have their own failure profile. Roller trucks wear out. The chain or belt stretches. The motor’s capacitor fails in the humidity. And after a hurricane-season surge event, we see a wave of slide operators knocked out by power spikes that fried the control board. We repair and replace slide motors for communities throughout the 33023 corridor, and we stock common slide-gate parts locally so we’re not waiting on a warehouse in another state to get your gate moving again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Andover
We’re certified to work on Viking, Ghost Controls, and DoorKing operators, among others, and we keep common replacement parts for those brands on the truck. If you live in Andover and your Viking swing arm is grinding or your DoorKing slide operator won’t respond, we can usually diagnose it on the spot and have the part we need that same day. We also service Elite, LiftMaster, FAAC, BFT, Linear, Ghost Controls, and Mighty Mule. If you inherited a gate with a brand name you’ve never heard of, call us anyway. We’ve probably worked on it.
Common Gate Motor & Opener Problems We See in Andover Homes
- Moisture and salt-air corrosion in control boards. Andover sits just a few miles inland from the Atlantic, and the year-round humidity combined with salt-laden air gets into control board enclosures, shorting out operators and access systems. We frequently find boards covered in green corrosion on gates that are only five or six years old.
- Worn hinge posts on 1960s and 1970s ornamental iron swing gates. The original gates on many Andover concrete-block homes have been rusting since before most of us were driving. When the post rots or shifts, the gate sags, binds the motor, and trips the safety photocell. The hinge post is often the hidden culprit.
- Hurricane-season surge damage to gate motors and boards. Every summer and fall, storms roll through Broward County and take out gate electronics. Community gates in Andover that run on 120-volt circuits without battery backup frequently go dark right when residents need them most.
- Non-compliant gates flagged during insurance reviews. Post-Hurricane Andrew wind-load ordinances require community entry gates to meet specific uplift and lateral-force ratings. Older HOA gates in Andover installed before 1993 are often flagged as non-compliant, turning what looked like a simple motor repair into a full panel-and-operator replacement.
Pricing for Gate Motor & Opener in Andover, FL
You should know what to expect before you pick up the phone. A typical gate motor repair in Andover runs $180 to $340. Motor installation runs $450 to $900 for most swing and slide operators. A new control board, if the old one is corroded beyond repair, usually falls between $220 and $400 installed. Battery backup systems for community gates run $350 to $700 depending on the operator’s voltage and whether we’re retrofitting an existing panel or installing a new enclosure. Every price is quoted in writing and agreed before work starts. You get a free estimate, and we won’t pad the invoice at the door. Call (877) 610-2993.
We Also Serve Cities Near Andover
Our crews serve Andover daily, along with Miramar, West Park, Hollywood, and West Hollywood. If you live just outside the 33023 area, give us a call. We’re your local Gate Motor & Opener in Andover team, and we cover the surrounding Broward County neighborhoods with the same no-trip-charge-inside-the-county policy.
Serving Andover, FL - Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Andover
A pre-1993 swing gate in Andover can sometimes be retrofitted with upgraded hinges, reinforced posts, and a modern operator that meets current uplift and lateral-force requirements. In many cases the gate panel itself is structurally sound and the failure is in the post footing or the operator. But when the steel has rusted thin or the original gate was never engineered for South Florida wind loads, replacement is the cheaper long-term answer. We’ll tell you which path applies to your gate after we look at it. Call (877) 610-2993 for a free assessment.
Andover’s subtropical humidity and salt-laden Atlantic air are the main reasons control boards fail prematurely. Moisture gets into the enclosure, condenses on the board, and corrodes the solder joints and connectors. We regularly replace boards that have failed after only five or six years. The fix that lasts is to replace the board and seal or relocate the enclosure so moisture can’t settle inside it.
We start at the hinge post, not the middle of the gate. A gate sags in the hinge post, and that’s where we begin. On the older 1960s and 1970s homes in Andover, the original post footings are often cracked or the post itself has rusted at the base. We reset the post, correct the sag, and then address the operator. Replace the motor without fixing the post and the new motor will fail the same way.
Yes. We install battery backup systems on swing and slide operators throughout Andover, and we recommend getting it done before hurricane season starts in June. A battery backup keeps your community gate operational when the power goes out, which is exactly when residents need to get in and out. We can retrofit most existing operators for between $350 and $700. Call (877) 610-2993 to schedule a measure.
For a 1990s-era steel slide gate in an Andover townhome community, a continuous-duty slide operator from DoorKing or Viking with enough torque for the panel’s weight and a battery backup is the right call. The key is sizing the operator to the gate’s actual loaded weight, including years of rust and any sag that has developed. We’ll measure the gate and spec the operator before we quote you a price.
If your gate motor in Andover is acting up, don’t let it sit. A gate that’s grinding or stuck open is a liability and a security problem. Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate. Hal’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Andover and Broward County since 2001.