Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Tucker
Gate repair in Tucker, GA typically runs $185-$450 for hinge and alignment work, $350-$900 for electric opener rebuilds, and $600-$2,200 for full post reset and re-hang jobs on the older brick-pillar entrances. Most repairs on a standard ranch or split-level driveway gate can be completed same day or next morning, because our crew is already working streets in 30084 and 30085 most weeks. If your gate is sagging, dragging, or dead on its opener, call (877) 610-2993 and you’ll get Hal or one of his crew on the line right then, not a recording.
We’ve been fixing gates in Tucker long enough to know exactly what the red clay does to a 1970s brick hinge post, and we show up with a welder, not a catalog of replacement gates. Gate Repair is what we do, and in Tucker specifically, it usually starts with the post, not the panel.
Why Gatewood Fence & Gate Is Tucker’s Preferred Gate Repair Company
The name on the shop is Hal Gatewood’s, and he’s been at this since 2001. People in Tucker keep our number because when a gate fails on a humid July afternoon and a live person picks up the phone, that matters. We don’t route calls through a call center, and the person who answers knows what a FAAC swing arm sounds like when the capacitor is going. The shop is owner-operated, the address is published, and the license number is there for anyone to check.
A gate that drags across the driveway in the Henderson Mill area gets the same straight answer whether you’re calling from a brick ranch on Fellowship Road or an acreage lot off Lawrenceville Highway: we’ll give you a real number before work starts, and the written estimate will not change when the truck pulls up. That’s not a promotion. That’s how Hal has run it since day one.
Tucker’s older subdivisions keep us busy because the failure pattern is so consistent. Brick pillars with shallow footings, decades of expansion and contraction in the red clay, hinges that have been gritting through rust since the Reagan era. We know what we’re going to find before we unload the truck, and we carry the heavy hinge plates, post steel, and operator parts these jobs need. Gate Repair in Tucker isn’t a side market for us; it’s our regular Tuesday.
Our Gate Repair Services in Tucker
Electric Gate Repair
Tucker’s acreage homes and long driveways off Hugh Howell Road often run gate openers far from the house. When the board fries or a limit switch fails, the gate either won’t move or won’t stop moving. We rebuild LiftMaster, FAAC, BFT, Linear, and Viking operators on site, and for solar setups, we test panels, charge controllers, and battery banks instead of just throwing a new arm at it. A bad solar battery on a cloudy week in Tucker will strand a gate open overnight, and that’s usually a DC supply problem, not a motor problem.
Automatic Gate Repair
Automatic gate repair in Tucker usually comes down to undo stress on the operator. A swing gate on original hinges that have not been greased in years drags the gearbox out of alignment, and the operator burns itself up trying to move 600 pounds of iron through resistance it was never rated for. We address the mechanical load first. That means hinge pins, pillar alignment, rack and pinion mesh on slide gates. Then we service the operator. Fixing the operator without fixing the load is how you buy the job twice.
Hinge & Post Repair
This is the Tucker specialty. Older brick entry pillars here were set directly into expansive red clay with shallow footings, and after 40 or 50 years of wet-dry cycles, the pillar leans. A gate hung on that pillar sags no matter how straight the panel is. We excavate, reset the footing with deep concrete and gravel, and re-hang the gate with fresh welded hinge plates. It’s the difference between a gate that stays plumb for a month and one that stays plumb for another 40 years.
Gate Realignment
If your gate catches at the latch or scrapes at the bottom, the first question is whether the gate actually moved or the post moved underneath it. In Tucker subdivisions built in the 1960s and 1970s, it’s usually the post. We measure both posts with a level before touching a hinge, because realigning a gate against a leaning pillar is not realignment, it’s a bet against gravity. We’ll tell you which one you have before we quote a dollar.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Weld & Rust Repair
Ornamental iron gates in Tucker sit in humid air most of the year, and the bottom rails, where water sits against the ground on a slope, rust through first. We cut out failed sections, weld in matching steel on site, grind it flush, and prime and paint the repair so it doesn’t show itself for another decade. On-site welding means the gate stays in your driveway; nobody hauls it across town and re-wraps it while a mortgage payment passes.
Lock Repair
A deadbolt on a driveway gate that has absorbed twenty years of Georgia rain and clay dust either stops throwing or freezes solid. We repair and replace gate locks, including solenoid locks tied into access keypads and intercom systems. For gates that feed into an existing phone-entry box, we test the release wiring at the same time, because a lock that works but doesn’t release from the house is not fixed.
Trusted Brands We Service in Tucker
We’re certified to service nine major gate brands, and for Tucker customers, we keep parts moving through the truck stock so the repair is not a two-week wait for a distributor box. FAAC, BFT, Linear, and Viking operators are the ones we see most on older Tucker automatic gates, and we carry common logic boards, limit switches, and remotes for them. If we have to order, you’ll know the lead time before we leave.
Common Gate Repair Problems We See in Tucker Homes
- Leaning brick pillars from red clay heave. Tucker’s post-war homes were built fast, and many entry pillars went into shallow footings with no gravel base. Over 40-plus years of wet-dry cycling in expansive red clay, those pillars migrate sideways two or three inches. Hinge repair alone won’t hold; the post has to be reset.
- Storm limb damage from the hardwood canopy. Spring storms drop heavy oak and hickory limbs onto gate frames every year in Tucker. A bent top rail on a swing gate holds stress the operator feels, and a knocked-off-track slide gate will bind harder every time someone tries to force it.
- Underpowered solar openers on long, unpowered driveways. Homes with big lots and no mains power at the entrance run solar gate openers, and the batteries take a beating in Tucker’s cloudy winter weeks. A gate stuck open or closed usually traces back to a failing AGM battery or a shaded panel that has not charged in two months.
- Rust-welded hinges on ornamental iron. The bottom hinge on a 50-year-old iron swing gate in Tucker carries rain splash and clay dust, and once it seizes, the gate starts working against itself every single cycle. That is what wears out motors and cracks weld joints.
Pricing for Gate Repair in Tucker, GA
Here’s what Tucker homeowners should expect. Hinge and post repairs run around $185-$450 depending on post condition and whether welding is needed. Gate realignment that does not require excavation is usually $150-$300. Electric opener repair, including board replacement or limit rebuild, runs $350-$900. A full pillar reset with excavation and concrete runs $600-$2,200, because it’s half a day of digging, forming, and re-hanging. Solar battery replacement and panel service on a long driveway setup usually falls between $200 and $500.
The price quoted to you before work starts is the price on the invoice. No trip charge inside the county, and any repair over $200 gets $40 off. Seniors and veterans take 10% off permanently. If you have a written estimate from another company, we’ll give you a free second opinion, and we’ll tell you honestly if you don’t need the work.
We Also Serve Cities Near Tucker
Our crew works Tucker and the surrounding area consistently, including Clarkston, Mountain Park, Stone Mountain, and Chamblee. If your gate is in one of those towns and the problem is urgent, call the same number and we’ll let you know when the truck can be there.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Tucker
Because in Tucker’s older subdivisions, the panel usually was never the problem. Brick entry pillars built in the 1960s through 1980s were routinely set in shallow footings directly into expansive red clay, and that clay heaves and shrinks through every wet-dry cycle. Over 40 years, the hinge post migrates two or three inches out of plumb, so every straight panel hung on it sags within months. Hinge repair without dealing with the post movement is a repeat call waiting to happen. Call (877) 610-2993 and we’ll put a level on the post first thing.
Yes, in most Tucker homes we can. The brick pillars usually stay; what needs attention is the anchor method and the load path. We mount operators with proper backing plates and, where the pillar has moved, we address the footing or reinforce the anchor rather than pulling brick. The key is the gate panel must swing freely first. If the hinges are rusted or the pillar leans, the operator will fail no matter how good the motor is. Call (877) 610-2993 for a free assessment.
It can, but only if the panel, battery bank, and operator are matched to the actual gate weight and daily cycle count. On long unpowered driveways in Tucker, we size solar for the worst winter weeks, not the best summer days. A heavy tube steel farm gate needs a bigger panel and more battery capacity than a light aluminum driveway gate, and skimping on the battery means a dead gate on a cloudy week. We install and service solar opener systems, and we’ll spec the system based on how often the gate actually cycles. Call (877) 610-2993 and we’ll look at your site.
Entrapment protection is the system that keeps your automatic gate from closing on a person, animal, or vehicle, and all modern openers require it. The critical question is whether your older Tucker gate has it working. Many original installs had inadequate photo eyes or pressure-sensing reversing edges, and after years of rust and cable damage, the safety edges stop talking to the controller. If your gate won’t reverse on contact, it is unsafe, and old gates on brick pillars where the hinges have shifted are especially prone to pinch points at the hinge post. Call (877) 610-2993 for a safety check.
The tell is uneven wear and a chattering motion. With the gate in manual mode, walk the rack and check for missing teeth or sections where the pinion has been chewing the same spot. If the rack is worn thin or has broken sections, we can splice in replacement rack sections and realign the pinion, and the gate will run quietly again. If the rack is shimmed away from the gate because of post movement, we’ll correct the alignment and then weld in new sections. Full replacement is rare and usually only after impact damage. Call (877) 610-2993 for an honest on-site look.
Our Experience With Tucker’s Brick Pillar Gates
On a quiet street in the Henderson Mill area of 30084, our crew was called for a sagging ornamental iron swing gate that had dragged across the driveway for months. The gate panel was straight; the real problem was the original brick hinge post, leaning three inches out of plumb after decades of Tucker red clay heaving. We removed the gate, excavated and reset the post footing with deep concrete and gravel, then re-hung the gate with new welded hinge plates and a fresh LiftMaster operator. No more sag, no more bottom drag, and the homeowner’s original brick work stayed intact.
That is the job on a lot of Tucker streets. Builders in the post-war subdivisions set entry pillars into whatever clay was under them, and after enough rain seasons, the ground moves and takes the gate with it. A repair crew that does not know this will sell you a new hinge kit and call it done. A month later, you are back where you started. We would rather dig once and fix it.
Contact Gatewood Fence & Gate for Gate Repair in Tucker
If your gate is sagging, dragging, dead, or unsafe, call (877) 610-2993. You’ll get a live person, a straight answer, and a written price before any work starts. Hal Gatewood has been at this since 2001, his name is on the shop, and the 90-Day Done Right Promise comes in writing on every job. If it’s not done right, one call brings him back. That’s the whole arrangement.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tucker since 2001.