Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Tucker
Gate parts and welding in Tucker usually means one of three things: a hinge post that has drifted out of plumb in the red clay, a storm-damaged rail that needs straightening and re-welding, or a swing gate on a shared driveway that needs converting to a slide. Most of this work runs $220-$650 depending on what actually failed, and we quote every job before we start. Hal Gatewood has kept a repair-first shop since 2001, and our crew serves Tucker direct from the Atlanta office. Call (877) 610-2993 and a live person answers, day or night.
We know Tucker’s gate problems because we see them every week across 30084 and 30085. These aren’t the easy swap-a-hinge jobs you’ll find in newer subdivisions. These are forty-year-old brick pillars shifting through Georgia’s wet-dry cycle, ornamental iron gates that predate modern openers, and shared rights of way where a swing panel simply has nowhere to go. If you live near Main Street, in the neighborhoods off Lawrenceville Highway, or along Hugh Howell Road, you’ve likely seen a leaning pillar or a gate that won’t latch after a hard rain.
Key takeaways:
- Gate repairs in Tucker typically run $220-$650, quoted and agreed before any work starts.
- We weld on site in your driveway, so your gate never leaves your property.
- Every job carries the 90-Day Done Right Promise in writing, with Hal Gatewood’s name on it.
- A live person at (877) 610-2993 answers 24/7, not a voicemail or an answering service.
Why Gatewood Fence & Gate Is Tucker’s Preferred Gate Parts & Welding Company
We’re a small shop with a big reputation in Tucker, built one gate at a time since Hal opened the doors in 2001. Homeowners around here appreciate that we don’t send a call center or a rotating crew. The person who shows up is the person whose name is on the invoice. And the phone you call is the same number you’ll use if something isn’t right ninety days later; because we stand behind the work in writing, not in fine print.
Tucker customers tell us the same three things. They like that we answer the phone with a real person at 6 a.m. or 10 p.m. They like that we shake off the “replace the whole gate” pitch and weld what can be welded. And they like that the estimate we give on the phone matches the price at the door. That last one matters. We’ve heard too many stories from Tucker homeowners who signed with a national outfit and watched the number climb once the truck pulled up. We don’t run that game. The price we quote is the price we do, and there’s no trip charge inside the county.
Our crew regularly works the older subdivisions off Idlewood Road, the streets around Cofer Lake, and the ranch neighborhoods near Brockett Elementary. We know which pillar and post configurations show up where, and we know what the red clay does to them over time.
Our Gate Parts & Welding Services in Tucker
Post Replacement
In Tucker, post replacement is often the actual repair hiding behind a “gate won’t close” call. The original brick pillars in our 1960s-1980s subdivisions were poured with shallow footings straight into expansive red Georgia clay. No gravel bed, no deep anchor. Forty years of wet-dry heave has moved those posts two to three inches out of plumb. Welding a bigger hinge won’t fix a post that has migrated. We reset the post in a properly compacted crushed-stone footing, weld the new bracket, and your gate finally hangs true.
Rail Repair
Tucker’s mature hardwood canopy drops limbs in spring storms, and a ten-foot limb bends a top rail or tears a hinge weld right out of the brick. We’ve repaired bowed rails on ornamental iron gates along Brockett Road after wind events, and we’ve rebuilt top rails that were hanging by one hinge. If the rail is bent, we straighten and weld it. If the weld tore the brick face, we reset the anchor and dress the repair so it matches the existing work.
Custom Welding
Not every gate problem in Tucker has a stock part answer. When a swing gate on a shared driveway blocks a neighbor’s right of way, we fabricate and weld slide-gate conversions from scratch, sized to your driveway and your post layout. We’ve also welded reinforcement plates on sagging gate frames, built custom latch mounts for offset pillars, and fabricated replacement pickets to match original 1970s ornamental profiles. If it’s steel or aluminum and it’s attached to your gate, we can probably weld it.
Hinge Replacement
Hinge replacement in Tucker is more than unbolting the old one and bolting on a new one. On brick pillars, the hinge is often anchored into brick that has cracked behind the plate. We replace the hinge and re-seat the anchor with fresh mortar or epoxy, so the new hinge has something solid to pull against. For ornamental iron gates with welded barrel hinges, we cut the old hinge off, dress the surface, and weld the replacement at the exact angle the gate needs to hang straight.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tucker
We service and stock parts for most major gate opener and hardware brands you’ll find on Tucker properties, including Viking, Linear, FAAC, and BFT, along with several others. Because we run our own Gate Parts & Welding inventory, we’re not waiting on a warehouse to ship a bracket or a gear rack across the country. We keep common hinge sizes, latch sets, rollers, and rack-and-pinion components on the truck, and we can source brand-specific operator parts faster than a distributor that doesn’t know your gate’s geometry. That means fewer second visits and less downtime for gates that have to work every day.
Common Gate Parts & Welding Problems We See in Tucker Homes
- Leaning brick pillars from red-clay heave. Tucker’s expansive clay soil swells in wet seasons and shrinks in dry ones, slowly pushing shallow-footing pillars out of plumb until the gate binds on the latch side or scrapes the ground.
- Storm-impact frame damage from mature hardwoods. Spring thunderstorms drop limbs from Tucker’s heavy canopy onto gates below, bending top rails and tearing hinge welds out of brick or stone pillars.
- Shared-driveway swing gates that block access. Many Tucker homes share a driveway or a narrow right of way, and a swing panel that opens across the shared access point creates a daily conflict. Slide-gate conversions solve the geometry problem.
- Rack-and-pinion or roller failures on slide gates. Sloped shared driveways in Tucker put extra pressure on slide gate rollers and gear racks, wearing them unevenly and causing chattering or binding over time.
Pricing for Gate Parts & Welding in Tucker, GA
Here’s honest pricing for the most common Tucker gate repairs, based on the jobs we run regularly in 30084 and 30085:
- Hinge replacement: $180-$320 per hinge, including welding and brick anchor repair if needed.
- Post reset and replacement: $350-$750 depending on post size, depth, and whether we’re working around settled brick or stone facing.
- Rail straightening and weld repair: $220-$480 for a bowed top or mid rail, including dressing the weld to match existing finish.
- Custom welding fabrication: $150-$550 for most brackets, reinforcement plates, or latch mounts; full slide-gate conversions are quoted after we measure the driveway and access path.
- Slide gate roller and gear rack replacement: $200-$500 depending on gate weight and rail condition.
Every quote is given before we pick up a torch, and there’s no trip charge inside the county. We also take $40 off any repair over $200, and seniors and veterans always get 10% off. If another company has given you a written estimate, we’ll give you a free second opinion on it. Call (877) 610-2993 and we’ll put a number in writing.
We Also Serve Cities Near Tucker
Our Gate Parts & Welding in Tucker customers often ask if we handle neighboring areas. We do. We serve Clarkston, Mountain Park, Stone Mountain, and Chamblee with the same on-site welding, the same upfront pricing, and the same 90-Day Done Right Promise. If you’re a few minutes outside Tucker and need a hinge post reset or a storm-damage rail welded, call us and we’ll get you on the schedule.
Serving Tucker, GA - Our Local Coverage Area
We’re based in the Tucker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Tucker
No, and we say that respectfully. A gate that leans inward in Tucker is almost always a pillar that has migrated, not a hinge that wore out. The brick pillars in these 1960s-1980s subdivisions were poured with shallow footings directly into expansive Georgia red clay, and forty years of wet-dry cycles heave them two or three inches out of plumb. Welding a bigger hinge onto a leaning pillar just transfers the problem to the new hinge. We reset the post in a properly compacted footing first, then weld the hinge at the correct angle. The fix holds because the foundation does. Call (877) 610-2993 and we’ll put eyes on your specific pillar.
The standard fix is a slide gate conversion. We rebuild the gate as a sliding panel that runs along the property line or the edge of the shared driveway, so it never swings into the neighbor’s access path. We fabricate the slide frame and rack system for the exact width of your opening, and we install the operator with safety photocells so it stops and reverses if a car or person is in the path. We recently did this on a shared driveway in a 30084 neighborhood where the original swing gate would have blocked the neighbor’s right of way entirely. Both families’ cars passed while we worked. Call (877) 610-2993 and we’ll measure your driveway.
Usually a weld job. Tucker’s spring storm season brings down big hardwood limbs, and a bowed top rail on a steel or ornamental iron gate can often be straightened and re-welded without replacing the frame. We assess the rail first; if the bend is creep rather than a sharp kink, we’ll straighten it, re-weld the hinge or latch connection, and dress the finish so it matches. If the impact twisted the frame beyond reasonable recovery, we’ll tell you that too and show you why before quoting a replacement. Call (877) 610-2993 and we’ll give you an honest read.
Not always. If the pillar is structurally sound and has simply tilted, we can sometimes excavate the footing, plumb the post with hydraulic jacks, and pack the void with compacted crushed stone and concrete for a permanent reset without removing the brick face. If the brick itself is cracked and crumbling, we’ll remove the damaged section, reset the post, and rebuild the pillar to match the original face. We’d rather preserve your existing masonry than demo it. Every approach is quoted before we start, and the 90-Day Done Right Promise covers the work. Call (877) 610-2993 and we’ll take a look.
If your slide gate speeds up on the downhill side, slams at the end of travel, or chatters as it moves, it’s a safety risk. Gravity is making the gate move faster than the operator expects, and a slide gate under load from an incline can fail at the rack and pinion, the rollers, or the end stop. We replace worn gear racks, re-level roller tracks, and install or repair safety photocells so the gate stops and reverses if anything breaks the beam. A slide gate on an incline without working safety edges is something you shouldn’t wait on. Call (877) 610-2993 and we’ll come out and check it.
Contact Gatewood Fence & Gate in Tucker, GA
Call (877) 610-2993 for a free estimate on any gate parts or welding work in Tucker. You’ll get a live person, a written price before the job starts, and a 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop and on every invoice, and we’ve been doing this since 2001. If you’d rather look someone in the eye, our shop is easy to find. If you’d rather call, we answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tucker since 2001.