Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Troy
Gate repair in Troy typically runs $185-$340 for hinge and post work, $260-$520 for control board replacement on older automatic openers, and $90-$180 for a realignment call. Most jobs in Troy are completed the same day we arrive. Hal Gatewood has been fixing gates since 2001, and his crew knows which Troy streets have the oldest footings and which farm lanes off SR 41 hold up worst after a wet spring. Call (877) 610-2993 and you’ll get a live person, not a voicemail tree.
Troy isn’t one kind of gate town. It’s a county seat with a downtown square ringed by Victorian homes, and it’s also the center of agricultural Miami County, where field gates and pasture entrances start a mile past the city signs. The same crew might reset a hand-forged iron post on West Main Street in the morning and weld a broken farm gate hinge off County Road 25A before lunch. That split is why Troy homeowners need a repair outfit that works on both ornamental residential hardware and agricultural-grade steel, and why our Gate Repair team carries parts for both in the truck every time we head toward 45373 and 45374.
Why Gatewood Fence & Gate Is Troy’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, his license number is published where anyone can look it up, and he has been owner-operated since 2001. That matters in a town like Troy, where people still ask their neighbor who fixed their fence before they call anybody. We earn that word-of-mouth one hinge pin at a time.
When a Troy homeowner calls us about a gate dragging on the brick walkway near the courthouse square, we know what we’re walking into before the truck leaves. Homes in the historic neighborhoods around downtown Troy were mostly built between 1880 and 1940. Their gate posts sit on footings that poured before modern concrete standards existed, and those footings have been through 40 or more freeze-thaw cycles every winter for a century. Some have shifted a quarter inch; some have cracked clean through. That changes how we quote the job, because resetting a post in fresh concrete is a different animal than swapping a hinge. We have not lost the ability to tell the difference, which is why homeowners over 50 in this town call us instead of a national outfit that reads from a script.
Our response time to Troy addresses in 45373 and 45374 is usually same-day for repairs, and a live person answers the phone around the clock. Not a call center. Not a chatbot. A person who knows what a drop rod is and can schedule a truck headed west while you’re still standing at the gate looking at it.
Our Gate Repair Services in Troy
Hinge & Post Repair
Most gate failures in Troy start below the surface. The Great Miami River valley delivers hard freeze-thaw cycles that heave posts out of plumb and fracture older concrete footings, especially in the low-lying areas near the river. A gate sags in the hinge post, not in the middle, and that is where we start. Hal and the crew dig out the old footing, set the post in new concrete, and rehang the gate square, so you’re not calling us back next spring.
Gate Realignment
Gates anchored in Troy’s older near-downtown neighborhoods sit on footings that have shifted over decades, producing gates that drag on the ground, refuse to latch, or hang visibly off-square. It’s a repeat-call pattern in this city, and the real fix is re-setting the footing, not cranking the hardware. We have fixed enough gates on West Main, Race, and Walnut Streets to know exactly where they fail. Our realignment work includes checking every hinge, the latch, and the post plumb before we call it done.
Electric Gate Repair
Older automatic operators installed around Troy before modern safety standards often have control boards that are now obsolete. Many homeowners call us thinking they need a whole new operator, when the actual problem is a capacitor, a limit switch, or a board that can be rebuilt or retrofitted. Hal is certified on FAAC, BFT, and Linear systems, and he will tell you straight whether a retrofittable board exists or whether replacement is the cheaper answer. You’ll get a written price before any work starts.
Lock Repair
Locks on Troy’s older gates are often period hardware, which means they’re worth repairing instead of drilling out and replacing with something from a big-box store. We rebuild old latch mechanisms, true up strike plates on brick columns, and add modern locks where security matters, all without ruining the look of an older gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Troy
We’re certified to service FAAC, BFT, Linear, Viking, and five other major gate brands, and we keep common replacement parts stocked so Troy customers aren’t waiting a week for a control board to ship from a distributor. For older FAAC and Viking operators around Troy, we often have retrofit boards or rebuild options that keep your gate running without a full swap. If the board is dead and nothing crosses over, we’ll tell you that too, in plain English, with a number attached.
Common Gate Repair Problems We See in Troy Homes
- Heaved posts on century-old footings. The 1880-1940 housing stock around downtown Troy means original gate posts are sitting in concrete that has shifted through decades of freeze-thaw cycles. Gates start dragging, latches stop lining up, and the gap at the top of the hinge side tells the real story.
- Obsolete automatic opener control boards. Many Troy homes had automatic gates installed in the late 1990s and early 2000s. Those boards are no longer made, and without retrofitting, the gate is effectively dead. We stock replacements and retrofits for the most common legacy brands.
- Flood-zone rust on hardware. Properties in low-lying corridors near the Great Miami River get periodic flooding that accelerates rust on iron gates and hinge hardware. Seized hinges and rusted posts are the most common farm gate failures we see along SR 41 and the county road corridors.
- Sagging wide farm gates. Driveway and pasture gates on hobby farms just outside Troy city limits are heavy, wide, and often hung on undersized posts. They lean, drag, and eventually snap hinge welds. We weld on site, in the driveway or at the field entrance, so the gate stays put.
Pricing for Gate Repair in Troy, OH
A basic gate realignment in Troy runs $90-$180, including hinge tightening and latch adjustment. Hinge and post repair typically lands between $185 and $340, depending on whether the post needs resetting in new concrete or just new hardware. Electric gate troubleshooting in Troy starts around $120 for the service call and diagnostics, with full control board replacement running $260-$520. Farm gate hinge rebuilds and weld repairs off SR 41 or County Road 25A usually fall between $150 and $400, depending on gate weight and rust damage. Every price is quoted and agreed before any work starts, in writing. You won’t get a different number at the door. Call (877) 610-2993 for a free estimate, and remember the standing offers: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Troy
Our Troy service area covers the full city and the surrounding rural routes, and our trucks regularly run to Tipp City, Piqua, Vandalia, and Englewood the same week. If you’re on a hobby farm between Troy and Casstown or out toward Phoneton, we’ll still come to you. The gate in your driveway is the one we’re interested in.
Serving Troy, OH - Our Local Coverage Area
We’re based in the Troy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Troy
Because the hinge post underneath it has shifted. In Troy’s older neighborhoods near the downtown square, gate posts often sit on concrete footings poured 80 to 100 years ago, and 40-plus freeze-thaw cycles every winter have heaved them out of plumb. Tightening hinges on a shifted post does nothing; the fix is resetting the post in new concrete and rehanging the gate level. We do this work regularly on West Main Street and the surrounding historic blocks. Call (877) 610-2993 for an inspection and a written quote.
Often yes. Many older FAAC, BFT, and Viking operators around Troy have retrofit boards available that bring them up to current safety standards without replacing the whole operator. Whether a specific board can be retrofitted depends on the model and age, and we’ll tell you straight which way is cheaper before any work begins. Call (877) 610-2993 and have the model number handy; we’ll look it up.
Yes. Automatic gate operators installed or retrofitted today are required to meet UL 325 entrapment protection standards, which means safety edges, photo eyes, or other monitored detection devices. Many gates in Troy installed before those standards were tightened don’t have them. If your opener is being repaired or restored, we’ll bring it up to current code as part of the job. The cost is included in the written quote you get before work starts.
Freeze-thaw cycles push gate posts out of plumb a fraction of an inch every winter, and after decades, that movement becomes visible: gates drag, latches miss, and the gate hangs off-square. The prevention is a properly poured concrete footing set below the frost line, with draining gravel underneath, plus hinge hardware rated for the gate’s weight. In Troy’s historic neighborhoods, where footings are old and shallow, we often recommend a full post reset rather than another round of hinge adjustment. The fix costs more once, and it’s done.
Seized hinge hardware and rusted posts. Farm gates along SR 41, SR 55, and the county road corridors take flooding moisture from the Great Miami River valley, and the result is rusted hinge pins, snapped welds, and posts leaning under the weight of wide, heavy gates. We weld on site, in the driveway or at the field entrance, so the gate stays put and you’re not hauling it anywhere. Call (877) 610-2993 for a farm gate quote, and you’ll get a written number before we touch the torch.
Call Gatewood Fence & Gate for Gate Repair in Troy
If your gate is dragging, leaning, or not opening at all, call Hal’s crew at (877) 610-2993. We’ll give you a straight answer, a written price, and a 90-Day Done Right Promise on every job, in writing, not in fine print. And if you’d rather talk in person, the shop door is open. Hal will be there.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Troy since 2001.