Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Troy
Gate installation in Troy and welding comes down to one thing: matching the fix to the gate, not swapping in whatever’s on the truck. A rusted hinge on a 1920s ornamental iron gate near the downtown square needs a different hand than a broken rack on a 16-foot solar slide gate off SR 41. Hal Gatewood has been repairing gates since 2001, and the crew serves Troy with on-site welding, a 90-Day Done Right Promise in writing, and a live person answering the phone 24/7. Call (877) 610-2993 for a straight answer and an honest price.
Why Gatewood Fence & Gate Is Troy’s Preferred Gate Parts & Welding Company
Troy’s gate hardware spans two centuries in the same ZIP code. Near the downtown square, original ornamental iron gates from the 1880s through the 1930s still hang on heaving limestone footings. Less than two miles out along SR 41, solar-powered openers swing 16-foot farm gates with no grid power anywhere nearby. That split means a gate company working Troy has to know both worlds, and it’s why our Gate Parts & Welding crew carries period-correct iron hardware and heavy-duty farm opener parts on the same truck.
Hal’s name is on the shop and on every invoice. The phone number you call goes to a real person, not a recording. The address is published, the license number is published, and if you want to drive to the shop and look him in the eye before you write a check, the door’s open. That’s the kind of accountability Troy homeowners are looking for after a national outfit quoted one price on the phone and charged another at the door.
We’ve been at this since 2001, long enough to know that a gate sagging near the downtown square is usually a footing problem, not a hinge problem, and a slide gate jumping the track off SR 55 is usually frost heave, not a bad wheel. Fix the panel without the post and you’ll fix it twice. We’d rather fix it once and be done with it.
Our Gate Parts & Welding Services in Troy
Hinge Replacement
Old iron gates in Troy’s historic neighborhoods often carry their original hinge straps, worn thin over a century of swing cycles. We don’t just bolt on a generic hinge and call it good. We match the strap style where we can, weld reinforcement where the old metal’s grown thin, and set the geometry so the gate swings true without dragging on the latch side. A typical hinge replacement on a residential iron gate in Troy runs $140 to $280 per hinge, including the weld work and alignment.
Post Replacement
We reset a sagging iron gate on a home just west of the downtown square after 90 years of Miami Valley freeze-thaw cycles pulled the hinge post 2 inches out of plumb. The fix meant removing the post, pouring a new footing below frost line, and welding a reinforcing plate before re-hanging the original gate so it latched true for the first time in years. That’s the work we do in Troy, and it’s the only way to stop a repeat sag. Post replacement with a new footing typically runs $350 to $800 in Troy, depending on depth, concrete, and what we find when we dig.
Rail Repair
Wrought iron and steel rail sections crack at the weld joints, especially on gates that have shifted out of square and been forced closed for years. We cut out the cracked section, weld in new stock, and grind the joint smooth so the repair reads as original. On farm gates off SR 41, rail repairs often involve reinforcing the hinge side where the full weight of a 16-foot panel bears on the post. Rail repair runs $120 to $300 per section in Troy, welded on site so the gate never leaves your property.
Custom Welding
Sometimes the part doesn’t exist. A gate from the 1920s has a latch assembly no one makes anymore, or a farm gate needs a custom bracket to hold a solar opener’s actuator arm at the right angle. Hal welds it himself, on site, in the driveway or at the fence line. Custom welding is billed by the job, not the hour, and you get a written price before the first spark. Most custom bracket and latch fabrication in Troy runs $90 to $220.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Troy
We service and stock parts for Linear, Viking, and Ghost Controls openers, plus DoorKing and the rest of the major names you’ll find on Troy gate motors and openers. That covers the solar-powered units on acreage off SR 41, the chain-drive operators on newer subdivisions in the 45374 ZIP, and the older Viking swing arms on farms that were put in twenty years ago and have earned every year of service. If we don’t have the part on the truck for a Troy job, we get it fast, and we don’t charge you a trip fee while you wait.
Common Gate Parts & Welding Problems We See in Troy Homes
- Frost-heaved hinge posts near the downtown square. Troy’s older near-downtown neighborhoods sit on footings that have shifted over 80 to 100 years of freeze-thaw cycles. The gate drags on the ground and the latch won’t catch. Adjusting the hinges fixes nothing. The post has to come out, the footing gets re-poured below frost line, and the gate goes back on square.
- Solar openers on acreage gates losing rack engagement. Properties off SR 41 and SR 55 run long slide gates where frost pushes the ground track out of alignment. The rack and pinion lose contact, the gate stalls or jumps, and the opener burns itself out trying. The fix is re-setting the track and re-welding the rack mounts, not blaming the motor.
- Rotted wooden gate posts near the Great Miami River. Flood-prone parcels see the base of wooden posts rot at ground level, usually within five to eight years. We cut the post at the rot line, weld a steel sleeve or bracket, and set the repaired post back on solid wood. The gate stays, the post gets a second life.
- Rusted weld joints on steel farm gates. Miami Valley humidity and river-bottom moisture eat weld joints from the inside out. A gate that looks fine in July can fail at the hinge weld in January when the metal’s cold and brittle. We grind out the rust, weld fresh, and seal the joint.
Pricing for Gate Parts & Welding in Troy, OH
What you’ll pay in Troy depends on what we’re fixing and what we find under the surface, but here’s a straight answer: hinge replacement runs $140 to $280 per hinge, rail repair runs $120 to $300 per section, post replacement with a new footing runs $350 to $800, and custom welding runs $90 to $220 per bracket or latch. A full ornamental gate re-hang with footing work near the downtown square usually lands between $600 and $1,200 all in.
The price is quoted and agreed before any work starts. You’ll never get a surprise invoice at the door. Estimates are free, there’s no trip charge inside the county, and you get the 90-Day Done Right Promise in writing. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Troy
Our Gate Parts & Welding in Troy crew works the whole county and the edges beyond it. We cover Tipp City, Piqua, Vandalia, and Englewood, which means the same Gate Parts & Welding team that welds your gate has seen the same problems twice this week on the other side of Miami County.
Serving Troy, OH - Our Local Coverage Area
We’re based in the Troy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Troy
Your hinge post has moved. In Troy’s older neighborhoods, decades of freeze-thaw cycles heave the post out of plumb, so the gate sags no matter how many times you tighten the hinges. The fix is pulling the post, re-pouring the footing below frost line, and re-hanging the gate square. Adjusting hardware without fixing the post means you’ll do the same job again next spring. Call (877) 610-2993 and we’ll tell you what your footing actually needs.
Yes. We weld custom brackets for solar opener actuator arms on farm gates up to 16 feet and wider, and we service Linear and Ghost Controls solar units that run without grid power. We also handle gate access control in Troy. The bracket angle has to match the opener’s throw, or the arm binds and burns out the motor. We get that angle right the first time. Call (877) 610-2993 for a free estimate.
The track has moved, not the gate. Frost pushes the ground track out of alignment every winter in Troy, and when the rack and pinion lose contact, the gate jumps. The permanent fix is re-setting the track on a stable base and re-welding the rack mounts, not shimming the wheels every January. We do that work on acreage gates throughout Miami County, and the 90-Day Done Right Promise covers it in writing.
We cut the post at the rot line, weld a steel sleeve or mounting bracket, and set the sound upper section back on a solid footing or base plate. The repair keeps your existing post and gate in service without digging up the whole fence line. On flood-prone parcels near the river, we also seal the joint so it doesn’t rot out again in five years. Call (877) 610-2993 for a price on your post.
Yes, and that’s exactly the right way to handle it. We weld the broken joint in place with matching stock, grind it smooth, and leave the original iron intact. The gate keeps its period look and you get the strength back without swapping in a modern panel that looks wrong on a Victorian home near the downtown square. Call (877) 610-2993 for an on-site quote.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Troy since 2001.