Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Trophy Club
Gate repair in Trophy Club usually runs $185 to $460 for hinge and post work, $220 to $540 for opener and automation repairs, and $340 to $1,100 for full replacement hardware with HOA-compliant finishes. Most jobs we complete in Trophy Club take two to four hours on site, and we schedule within one to two business days for non-emergency calls. If your gate is stuck open, stuck closed, or making a grinding noise near the Trophy Club Country Club side of town, call (877) 610-2993 and we will give you a straight answer before we hang up.
We know Trophy Club differently than a chain outfit rolling through with a branded van. The subdivisions here were built around the country club, and the gates were installed with ornamental iron work that looks sharp but fights back after two decades of North Texas clay shifting under the posts. That is not a guess. That is what we see on every fourth call in 76262.
Why Gatewood Fence & Gate Is Trophy Club’s Preferred Gate Repair Company
The name on the shop belongs to Hal Gatewood, and Hal has been doing this since 2001. That matters in Trophy Club because the HOA architectural boards here do not deal with call centers or rotating crews. They want the same person who looked at the spec sheet to be the one holding the welder.
A gate in Trophy Club rarely fails in isolation. The hinge post leans from clay heave, the panel sags, the opener motor burns out trying to move a gate that no longer swings freely. National companies quote you a new opener, bolt it on, and leave. The post is still leaning. Six months later the new opener is dead too. We fix the post first, then the panel, then the opener. That order is not negotiable around here.
Our crew serves Trophy Club locally, dispatched from our Dallas-Fort Worth office, and a live person answers the phone 24 hours a day. No voicemail at 2 a.m. No chatbot. When you call (877) 610-2993, someone here picks up. Hal’s license number is published and his address is on every invoice. In a town built on country club accountability, that is the oldest trust there is.
Our Gate Repair Services in Trophy Club
Hinge & Post Repair
This is the repair Trophy Club needs more than any other. Blackland Prairie-adjacent clay shrinks in drought and swells in rain, and the shallow footings under many 1990s and 2000s ornamental iron posts were never deep enough to hold through those cycles. A hinge post that is 3 inches out of plumb will tear any hinge set apart within two seasons. We re-set the post, pour the footing depth the soil actually requires, and match the hinge style to your subdivision’s original spec. A gate sags in the hinge post, not in the middle, and that is where we start.
Gate Realignment
A Trophy Club gate that drags on the driveway or will not latch cleanly is almost never a bent panel. It is a post that moved. We measure the gap on both sides, check the post with a plumb line, and correct the alignment at the hinge point rather than shimming the panel or grinding the latch plate. That is the difference between a repair that holds and a repair you call about again in October.
Automatic Gate Repair
Builder-grade operators installed in the 2000s were sized for gates half as heavy as the ornamental iron panels Trophy Club builders actually hung. The motor strain shows up as grinding, refusing to open fully, reversing mid-travel, or simply dying with no warning. We service and repair Viking, Ghost Controls, DoorKing, and Elite openers, and we stock common parts so we are not waiting on a truck from Houston while your gate stays open all night.
Electric Gate Repair
Electric gate failures in Trophy Club often trace back to the power and conduit runs that were never installed properly during construction. Some have undersized wire, others have junction boxes that have been underwater twice since the last big rain. We trace the circuit from the panel to the motor, correct the voltage drop, and replace the board or limit switch only if it actually failed. Show me the gate closing on its own and I will show you where it is failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Trophy Club
We are certified to service nine major gate brands, and in Trophy Club the ones we see most often are Viking, Ghost Controls, DoorKing, and Elite. Each of those brands has quirks, and we know them without looking them up. We stock parts for these systems locally, which means your opener does not sit dead for a week while a chain company waits on a freight delivery. If your HOA requires a specific operator model or safety edge, we work with that requirement rather than arguing with the architectural board. We have been through enough Trophy Club HOA reviews to know the paperwork is half the job.
Common Gate Repair Problems We See in Trophy Club Homes
- Clay heave twisting hinge posts out of plumb. Trophy Club sits on expansive clay that swells after heavy rain and shrinks hard in summer drought. Post footings poured shallow in the 1990s and 2000s crack and lean, and every hinge above that point follows.
- Builder-grade openers failing under oversized iron gates. The ornamental iron gate panels common across Trophy Club subdivisions weigh far more than the basic openers builders installed. The motors burn out before the hinge post ever gets corrected, and homeowners end up replacing the opener twice instead of fixing the structure once.
- HOA spec mismatches stalling repairs. Trophy Club’s architectural review boards keep exact spec sheets on file for gate hinges, latches, and finishes. A replacement latch that is close but not exact can hold up approval for weeks, so we source to the spec sheet, not to whatever is on our shelf.
- Monument entry gates with mismatched finishes. Neighborhood entry gates at Trophy Club subdivisions carry community identity weight. When a replacement hinge or latch does not match the original finish, the mismatch is obvious from across the street and the HOA will notice before you do.
Pricing for Gate Repair in Trophy Club, TX
Every price is quoted and agreed before any work starts. That is non-negotiable. If the job changes, we tell you before the torch comes out. Standing offers apply to every Trophy Club job: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we will give you a number you can plan around.
We Also Serve Cities Near Trophy Club
Our Gate Repair team covers Trophy Club and the surrounding metro communities, including Roanoke, Southlake, Lantana, and Keller. If you are just outside the 76262 boundary, call us anyway. We have been serving Trophy Club long enough that we know where the zip lines blur.
Serving Trophy Club, TX - Our Local Coverage Area
We’re based in the Trophy Club area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Trophy Club
How does Trophy Club’s HOA approval process affect my gate repair timeline?
Most Trophy Club gate repairs do not need HOA approval, but anything that changes the visible hardware, finish, or gate style does. If your subdivision’s architectural review board has a spec sheet on file, the approval takes anywhere from a few days to three weeks depending on the board’s meeting schedule. We handle the documentation and source hardware to the spec sheet so the review does not get kicked back. Call (877) 610-2993 and we will tell you whether your specific repair needs approval before we start.
My Trophy Club swing gate sags to one side every summer - is the panel or the post failing?
In Trophy Club, it is nearly always the post. The clay soil under 76262 shrinks in the summer drought, and the hinge post leans with it. The panel may be perfectly straight. We run a plumb check before anything else, because replacing hinges on a leaning post wastes your money and ours. Fix the panel without the post and you will fix it twice.
Can you automate a gate that was built manual in an older Trophy Club home?
Yes, and we do it regularly in Trophy Club’s older sections. The gate itself often works fine, but the power run and conduit either do not exist or were never sized for an opener. We handle the full scope: conduit, wiring, voltage drop correction, opener, safety edges, and HOA paperwork if your subdivision requires it. A manual gate converted to automation in Trophy Club runs $1,800 to $4,200 depending on gate length and access to power.
What entrapment protection is required when repairing or adding an automatic gate in Trophy Club?
Every automatic gate in Trophy Club must have functioning entrapment protection: primary and secondary safety edges or photo eyes, plus a reversing mechanism that meets UL 325 standards. If we replace an opener or control board on an existing gate, we verify the safety system before we leave. If the safety edges are worn or the photo eyes are misaligned, we replace them as part of the job. A gate that closes on a car or a child is not a repair we leave behind.
Why did my Trophy Club slide gate stop mid-travel and reverse?
A slide gate that halts and reverses in Trophy Club is usually hitting resistance or a failing safety sensor. Common causes include a wheel or track that has shifted in clay soil movement, a bent guide, or debris packed into the rail. We inspect the track alignment first, then the safety edge and photo eye wiring. If the board is misreading the sensor, we replace the sensor before the board, because the board is rarely the problem. Call (877) 610-2993 for an exact diagnosis and a free estimate.
Call Gatewood Fence & Gate for Trophy Club Gate Repair
If your gate is leaning, grinding, stuck, or just not closing the way it used to, call (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and his name is on every invoice. Every job carries the 90-Day Done Right Promise in writing: if it is not done right, one call brings him back. No trip charge inside the county. No price change after the quote. Just a fixed gate that stays fixed.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Trophy Club since 2001.





Before
After
Before
After
Before
After