Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Trophy Club
Gate parts and welding in Trophy Club means dealing with ornamental iron, HOA spec sheets, and North Texas clay. Our Gate Parts & Welding crew fixes broken hinges, twisted posts, split rails, and worn rollers without tearing out a gate that just needs a proper weld. We work in Trophy Club neighborhoods every week, from the estate lots around Indian Creek Drive to the gated entries off Trophy Club Drive, so we know what the architectural review board expects before we strike an arc. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Trophy Club’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and still runs every job himself or with the same small crew he has had for years. That matters in Trophy Club because the person who shows up to weld your gate is the same person whose name is on the invoice. We are not passing through. We publish our address, our license number is right there for anyone to look up, and the 90-Day Done Right Promise is written on every job sheet. If the repair doesn’t hold, one call brings us back.
Trophy Club homeowners call us because we show up in the window we promised. Calls are answered by a live person 24/7, not a voicemail tree. We offer a free second opinion on any written estimate, and every repair over $200 gets $40 off. We also honor a permanent 10% discount for seniors and veterans. Those are standing offers, not haggling points.
Our Gate Parts & Welding Services in Trophy Club
Hinge Replacement
Hinges carry the full weight of a swing gate, and in Trophy Club they fail in a specific way. The clay soil under the post shifts, the post leans, and the hinge takes a load it was never designed for. We replace barrel hinges, weld-on strap hinges, and adjustable hinge assemblies with hardware that matches the original spec your HOA has on file. A mismatched hinge style can stall an architectural review even if it is stronger than the original, so we source exact-match parts or document a compliant substitution before we install anything.
Post Replacement
Most gate repairs in Trophy Club are actually post problems. North Texas sits on expansive Blackland Prairie clay that shrinks in drought and heaves in rain, and over 20 years that cycle twists gate posts out of plumb. We cut the bad post at the footing, dig deeper than the original, pour a beefier concrete base, and weld the new post true. Then we rehang the gate so it swings square. Fix the panel without the post and you will fix it twice.
Rail Repair
Ornamental iron gates rust at the rail-to-picket joints first, because water sits in those welds. We see it on nearly every older Trophy Club driveway gate. We grind out the rust, cut out the bad section, and weld in new rail stock that matches the original profile. Then we treat and coat the repair so it doesn’t fail again in six months. HOA covenants usually require the finish to match, and we match it the first time.
Custom Welding
Not every gate part exists on a shelf. When a hinge bracket is proprietary, a latch mounting is rusted beyond salvage, or an operator bracket needs a custom angle, we weld it on site. The gate stays in your driveway. We don’t haul it off to a shop somewhere in the Metroplex. That keeps your Trophy Club gate secure, keeps the job moving, and means you can watch the fix happen from your front window.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Trophy Club
We install and repair parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Our crew is certified on those nine brands, and we keep common parts in the truck so a repair in Trophy Club doesn’t wait on a parts run to Dallas. Whether you have a Viking swinging an acreage gate off Hwy 114 or a Ghost Controls solar unit on a long driveway, we know the wiring, the limits, and the failure points.
Common Gate Parts & Welding Problems We See in Trophy Club Homes
- Clay heave twisting hinge posts. The same expansive soil that cracks Trophy Club driveways also moves gate posts. A post that shifts an inch binds the gate, strains the operator, and eventually snaps a hinge. Re-setting the post deeper fixes the root cause.
- Rust at ornamental weld joints. HOA-prescribed iron gates look great but trap water at every picket-to-rail weld. Once the powder coat fails, rust spreads fast. Custom welding with proper surface prep and matching finish stops it.
- Solar openers under-performing on wide entrances. Acreage lots around Trophy Club often run solar gate openers because mains power is impractical at the road. When panel voltage or battery health drops, the gate moves slow or not at all. We diagnose the charging circuit, not just the battery.
- Worn rollers on cantilever and slide gates. Clay soil movement throws slide gate tracks out of alignment, which chews rollers and shackles. Replacing rollers without straightening the track buys you six months. We do both.
Pricing for Gate Parts & Welding in Trophy Club, TX
A hinge replacement on a standard ornamental driveway gate in Trophy Club typically runs $150 to $280 per hinge, including the part and on-site welding. Post replacement ranges from $450 to $900 depending on post size, footing depth, and whether we need to match a custom HOA finish. Rail repair with custom welding usually lands between $200 and $500 per rail section. A full gate frame repair with multiple welds and post re-setting can run $800 to $1,400. The price is quoted and agreed before any work starts, in writing. Estimates are free, and there is no trip charge inside the county. Call (877) 610-2993 for a straight number.
We Also Serve Cities Near Trophy Club
Our Gate Parts & Welding in Trophy Club crew also runs calls to Roanoke, Southlake, Lantana, and Keller. Same local knowledge, same live person on the phone, same 90-Day Done Right Promise on every job.
Serving Trophy Club, TX - Our Local Coverage Area
We’re based in the Trophy Club area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Trophy Club
Trophy Club’s architectural review board keeps original spec sheets for subdivision gates, and a replacement hinge, latch, or rail that doesn’t match the original can stall the repair until we source exact-match hardware or document a compliant substitution. We manage that paperwork for you. Call (877) 610-2993 and we will check your subdivision’s requirements before we order a single part.
Heavy rain saturates the clay soil around your hinge post, which swells and heaves, pushing the post out of plumb and sagging the gate. The fix is re-setting the post deeper with a proper footing, not adjusting the panel. A sag is in the post, not the middle. Call (877) 610-2993 for a post inspection.
Yes, if the panel wattage, battery capacity, and operator duty cycle are matched to the gate’s weight and daily cycles. We size solar systems for the actual gate, not the brochure. Many Trophy Club acreage gates were under-speced at install. Call (877) 610-2993 and we will measure the gate and tell you what it needs.
UL 325 is the national safety standard that requires automatic gates to reverse or stop when they hit an obstruction, and to have external entrapment sensors like photo eyes or edge sensors. A gate without working entrapment protection can seriously injure someone, and a high-tension spring or cable under load is dangerous to work around. We set and test those sensors on every operator job.
Yes. We grind out the rust, weld in replacement rail stock that matches the original profile, and touch up the repair with a finish that matches the surrounding powder coat closely enough for HOA review. Nobody repaints an entire gate for one rail. Call (877) 610-2993 and we will look at the break and tell you what the repair needs.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Trophy Club since 2001.