Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Saginaw
A gate that won’t close is more than an annoyance in Saginaw, it’s an open invitation to every dog, kid, and stranger passing down Bailey Boswell Road. Gate repair in Saginaw, TX typically runs $140 to $680 depending on whether we’re straightening a post, replacing hinges, or swapping an automatic opener, and most jobs are done the same day we show up. Hal Gatewood has been fixing gates since 2001, and the person who answers when you call (877) 610-2993 is a live human being, not a recording. If your gate sags, drags, or stopped opening after the last freeze, call us. We’ll tell you straight what it needs and what it costs before any work begins.
Key takeaways:
- Saginaw’s blackland clay heaves seasonally, so post footings need to go 36+ inches deep or the gate leans again by August.
- Builder-grade automatic openers in 2000s tract homes die young here because the original wiring and footings weren’t meant for Texas soil and ice.
- Every Gatewood job carries a 90-Day Done Right Promise in writing, and the price is agreed before the first tool comes off the truck.
Why Gatewood Fence & Gate Is Saginaw’s Preferred Gate Repair Company
We’re not a national outfit dispatching a stranger from three counties over. Gatewood Fence & Gate is Hal Gatewood’s shop, locally owned and owner-operated since 2001, with a published address and license number anybody in Saginaw can look up. When a Saginaw homeowner calls about a leaning post off Blue Mound Road or a dead opener in Willow Creek, the person who shows up knows what that soil does to a gate. The name is on the shop, and the shop is down the road, that’s the oldest accountability there is.
Saginaw customers call us because the work holds. Our 90-Day Done Right Promise is stamped in writing on every job, not buried in fine print. One call brings us back, no runaround, no arguing. And unlike companies that route you to voicemail after five o’clock, a live person answers our phone 24 hours a day, seven days a week. You’ll get Hal or someone on his crew who can actually tell you what’s happening with your gate.
We also service what other companies want to replace. A gate sags in the hinge post, not in the middle, and that’s where we start. We weld on site in your driveway, so your gate never leaves your property. If the post is heaving out of the clay, we dig it out, bell-bottom the footing, and set it so it survives a full Texas seasonal cycle. That’s the difference between fixing a gate and fixing it twice.
Our Gate Repair Services in Saginaw
Automatic Gate Repair
Automatic gate repair is the most common call we get from Saginaw neighborhoods, and the February 2021 freeze turned a lot of builder-grade openers into scrap. Ice seizes the gear box, the control board takes a surge when power comes back, and suddenly the keypad blinks but the gate doesn’t move. We service Linear, Viking, Ghost Controls, and DoorKing openers, and we stock the common boards, gears, and safety photocells so we’re not waiting a week on a part for a home in the 76131 corridor. If your opener is tripping a GFCI or groaning under load, call us. We’ll diagnose it on site and quote the repair before touching anything.
Gate Realignment
In Saginaw, gate realignment isn’t a one-time fix, it’s seasonal maintenance, and that’s not your fault. The Fort Worth Prairie blackland clay under your subdivision shrinks in 100-degree summers and heaves with the first good rain. A post set to code at 18 inches deep can be three inches out of plumb by late August. We reset posts with deep bell-bottom footings, re-hang the gate so the latch strikes true, and adjust hinge tension until the gate swings free. Show me the gate closing on its own and I’ll show you where it’s failing, usually in the hinge post.
Hinge & Post Repair
Hinges are the working joints of your gate, and Saginaw’s cedar and wrought iron gates are all hitting the 15 to 25 year mark where hardware fatigue shows up. North Texas ice storms snap hinge welds under ice weight, and summer heat cycles metal until it cracks through the barrel. We weld on site, straighten bent hinge plates, and replace stripped lag bolts with through-bolts and backing plates that actually hold. If the post itself is rotted at the base or leaning hard, we dig it out and set a new one deep enough for this soil, not California soil.
Electric Gate Repair
Electric gate repair covers everything from dead keypads and ghost-opening remotes to shorted loop detectors and safety edge failures. Saginaw’s 2000s tract homes often skip the dedicated 20-amp circuit for the gate opener, so a single popped GFCI in a summer brownout leaves the entire gate dead and the keypad unresponsive. We trace the run, fix the circuit, and when the wiring wasn’t done right in the first place, we trench new conduit from the house to the gate and do it properly. All of it is quoted up front, and the price doesn’t change at the door.
Trusted Brands We Service in Saginaw
We’re certified to service nine major gate brands, and for Saginaw customers that usually means the builder-grade stuff that came with the house: Linear and DoorKing are the two we see most on automatic swing gates in 2000s subdivisions, with Viking and Ghost Controls showing up on the nicer wrought iron driveway gates off Bailey Boswell. We keep common parts in stock for all of them, which matters when your gate is stuck open on a Sunday and the HOA is already emailing. If you’ve got an opener we haven’t named, call anyway, odds are we work on it.
Common Gate Repair Problems We See in Saginaw Homes
- Seasonal post lean. Saginaw’s blackland clay shrinks up to four inches in a dry North Texas summer, pulling standard footings out of plumb within one season. We set posts 36+ inches deep with bell-bottom pours as standard, because anything less is a warranty on repeat visits.
- Builder-grade opener failure. The automatic openers installed in 2000s tract developments were the cheapest thing the builder could spec, and the February 2021 ice storm finished off thousands of them. If your LA400 or similar seized after a freeze, the gear box and control board both took damage.
- GFCI tripping in summer brownouts. Many Saginaw gate openers share a circuit with garage outlets or exterior lighting. When the AC load spikes in August, the GFCI trips, the gate goes dead, and the keypad won’t respond. It’s an easy fix once you know where the circuit runs.
- Cedar bottom rail rot. The freeze-bake cycle here cracks cedar bottom rails on HOA swing gates every five to seven years. The latch starts striking high, the gate binds against the post, and eventually the rail lets go entirely. Fix the panel without the post and you’ll fix it twice.
Pricing for Gate Repair in Saginaw, TX
Here’s what gate repair actually costs in Saginaw, with no fuzzy language. A basic hinge replacement on a cedar swing gate usually runs $140 to $240 including hardware. Gate realignment with post straightening starts around $180 and goes to $340 if we’re resetting the post. Automatic opener repair typically lands between $225 and $680, depending on whether it’s a gear kit, a control board, or a full replacement with new safety photocells. Weld and rust repair on a wrought iron gate runs $160 to $420 in most cases.
Every estimate is free, and the price is quoted and agreed before any work starts. No trip charge inside the county. We also offer $40 off any repair over $200, and a permanent 10 percent discount for seniors and veterans. If another company already quoted the job, bring us the written estimate and we’ll give you a free second opinion. Call (877) 610-2993 and we’ll tell you the number on your specific gate.
We Also Serve Cities Near Saginaw
If you’re just outside Saginaw, we cover the surrounding area too. Our crews serve Watauga, Haltom City, Eagle Mountain, and Keller with the same owner-operated service and the same 90-Day Done Right Promise. And if you’re a little further out but still in North Texas, call us, the worst we’ll say is we need to check the drive. The person answering the phone is the person who decides whether we can get to you. For anything else about Gate Repair in Saginaw, the phone number’s the same: (877) 610-2993.
Serving Saginaw, TX - Our Local Coverage Area
We’re based in the Saginaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Saginaw
Because the original footing wasn’t dug deep enough for Saginaw’s blackland clay. The Fort Worth Prairie soil shrinks hard in summer heat and then heaves when rain returns, and a post set at the standard 18 inches will move within one season no matter how well you tamped it. Our crews bell-bottom footings to 36 inches or deeper as standard, not as an upgrade. In the Willow Creek subdivision off Bailey-Boswell Road, our tech replaced a builder-grade LiftMaster LA400 that had seized after the 2021 ice storm and realigned the hinge post, which had leaned three inches out of plumb by July because the original footing was only 18 inches deep. We trenched a new conduit run, added safety photocells to meet UL 325, and rebuilt that post with a 42-inch bell-bottom pour. It’s still straight. Call (877) 610-2993 for an exact quote, estimates are always free.
You can absolutely add a keypad to a manual gate, but the job is bigger than bolting on a lock. Most Saginaw manual driveway gates were never wired for automation, so there’s no conduit stub-out waiting under the drive. Adding a keypad or loop detector means cutting through a four-inch concrete apron to run the wiring, then trenching conduit from the house to the gate for power. Our crews do this work weekly throughout the 76131 corridor, and we handle the concrete cut, the conduit run, and the operator install as one job with one written quote. Before you start, check your HOA rules on gate hardware, some subdivisions restrict the style of keypad or post placement. Then call us at (877) 610-2993 and we’ll walk the property with you and price the whole job.
Check the breaker and GFCI first, then look at the control board for scorch marks or bulging capacitors, and finally listen to the motor. North Texas ice storms, including the February 2021 freeze, routinely seize automatic gate operators with ice in the gear box, snap hinge welds under ice weight, and fry control boards when power returns with a surge. If the gate groans but won’t move, the gear is stripped. If the board clicks but nothing happens, the relay is burned. Don’t force the gate open by hand with the motor still attached, you’ll destroy the gear train. Call us at (877) 610-2993 and we’ll diagnose it on site. Estimul estimates are free, so you’ll know the damage before you commit.
Usually yes, if the frame is sound. A gate sags in the hinge post, not in the middle, and in Saginaw the lean is almost always soil movement or rotted bottom rail, not a bad panel. We re-hang the gate on new hinges, weld or bolt a steel anti-sag kit across the frame, and replace the cedar bottom rail if the freeze-bake cycle has cracked it. If the post itself is leaning, we reset it with a deep bell-bottom footing. The only time a full panel swap makes sense is if the cedar boards are rotten clear through, and even then we’d rather replace boards and keep your gate on the hinges than haul it off and start over. Call (877) 610-2993 and we’ll tell you which fix your gate needs and what it costs.
Because the opener is likely sharing a circuit with other outlets, usually the garage or an exterior line, and summer brownouts in Saginaw push that circuit past its limit. The 2000s tract builds around here often skipped the dedicated 20-amp circuit for the gate operator, so a single popped GFCI leaves the gate dead and the keypad unresponsive. We trace the run, separate the gate onto its own circuit, and replace the GFCI with the right amperage. If the wiring from the house to the gate is undersized or deteriorating, we trench a new conduit run and pull the proper gauge. It’s not a gate problem, it’s a wiring problem, and it’s one we see constantly in the 76131 corridor. Call (877) 610-2993 and we’ll find the circuit before it trips again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Saginaw since 2001.