Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rockland
Gate repair in Rockland, MA usually means one of three things: a post that heaved out of plumb over the winter, a chain-link gate from the 1960s that finally snapped at the base, or an electric opener that quit because the gate frame shifted and bound the motor. If that sounds like your driveway, call us at (877) 610-2993. We’re Gate Repair specialists, and we’ve spent years working on Rockland’s mid-century ranch and Cape homes, so we know what the soil and the freeze-thaw cycle here actually do to gate hardware.
Most jobs in Rockland get a same-day or next-day visit, and every repair carries our 90-Day Done Right Promise in writing. You’ll get an upfront price before any work starts, and the person who shows up is the person whose name is on the invoice.
Why Gatewood Fence & Gate Is Rockland’s Preferred Gate Repair Company
Hal Gatewood started this company in 2001 because he got tired of seeing gates that were replaced when they should have been repaired. That’s still how we operate in Rockland. If a post can be re-set, we re-set it. If a hinge can be re-welded on site, we weld it. We don’t haul your gate to some shop across the state and we don’t sell you a new frame when the old one has another twenty years in it.
Rockland homeowners tend to be the kind of people who check a license number and want to see a face they recognize. Hal’s address is published and his name is on the shop. That’s not a marketing line. That’s how accountability works in a town like Rockland, where you’ll run into the person who fixed your gate at the hardware store on Market Street two weeks later. Calls are answered by a live person around the clock, not a voicemail box or a chatbot.
Our Rockland customers regularly mention two things in reviews: we showed up in the window we promised, and we fixed the actual problem instead of quoting a replacement. You can also take advantage of standing offers that don’t require negotiation: $40 off any repair over $200, no trip charge inside Plymouth County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Scheduling is coordinated from our Boston office, but the crew serving Rockland lives and works right here on the South Shore.
Our Gate Repair Services in Rockland
Electric Gate Repair
Rockland’s electric gates are mostly retrofit openers bolted onto older chain-link or wooden frames, which means the opener usually fails because the gate itself moved, not because the motor wore out. We service LiftMaster, Linear, Viking, Ghost Controls, and DoorKing openers, and we fix the mechanical problem first so the motor stops straining. A typical electric gate repair in Rockland runs $180 to $340, including the service call and most common sensor, limit switch, and control board replacements.
Automatic Gate Repair
When a slide gate on a tight Rockland driveway starts jerking or stopping mid-travel, the rack and pinion or drive chain is usually out of alignment because a post shifted. We don’t just reset the opener’s limits and leave. We find the underlying cause, correct it, and test the gate through full cycles with the safety edges and photo eyes working properly. Automatic gate repair in Rockland typically costs between $220 and $400 depending on the drive type and what’s binding.
Hinge & Post Repair
This is the most common repair we do in Rockland, and it’s the one that separates a one-and-done fix from a repeat call every spring. Rockland’s clay-heavy glacial till holds water, freezes hard, and pushes posts up and out of plumb. We weld cracked hinges on site, reinforce rusted post bases with steel collars, and when heaving is the problem, we pull the post and re-set it in a concrete footing that goes below the 48-inch frost line. A typical post re-set and hinge repair in Rockland runs $280 to $500 per post.
Gate Realignment
If your gate drags, binds at the latch, or won’t close flush after the thaw, the frame has twisted or the post has moved. We re-align gate frames, adjust hinges, and re-level the gate so it opens and closes with one hand. A standard realignment on a Rockland walk gate or driveway gate runs $140 to $260, and it’s often finished in under two hours.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rockland
We’re certified to service nine major gate brands, and for Rockland customers that means we can usually repair what’s already on your property without ripping out a perfectly good opener because we don’t stock the parts. We carry common replacement parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems on our trucks, and we keep an inventory of the limit switches, relays, and safety edge components that fail most often in coastal New England weather. If you’ve got a DoorKing slide operator on a shared driveway off Union Street or a Ghost Controls swing opener on a Cape off Webster Street, we can typically source and install the part same week.
Common Gate Repair Problems We See in Rockland Homes
- Frost-heaved posts that leave gates out of plumb. Rockland’s clay soil pushes posts up two to three inches every hard winter. The gate didn’t fail. The post moved. Re-setting it in a deeper frost-depth footing is the permanent fix.
- Rusted chain-link posts from the 1950s through 1970s housing boom. Many Rockland homes still have their original galvanized posts, and after fifty-plus New England winters the base has rusted thin enough to snap under wind load. We cut out the rotted section, weld in new steel, and brace the corner where the strain concentrates.
- Binding slide gates on shared driveways and tight lots. When a slide gate runs inches from a house corner or fence line, a two-inch sag means scraping and binding. We re-align the rack and pinion and level the gate so it tracks clean.
- Nor’easter-damaged latch and hinge hardware. Ice and wind loading bends latches, strips hinge screws, and twists wooden frames that were already weathered. We replace hinges with heavier gauge steel and re-mount latch plates so the gate catches and holds.
Pricing for Gate Repair in Rockland, MA
Most Rockland gate repairs land between $140 and $500, depending on what failed. A hinge weld or latch replacement runs $140 to $220. Electric opener diagnostics and repair run $180 to $340. Post re-setting with a frost-depth footing runs $280 to $500 per post, and that’s the job that prevents the repeat-call cycle. Full re-hangs of sagging chain-link gates run $300 to $600. No trip charge applies anywhere in Plymouth County, every job is quoted and agreed before we touch a wrench, and the 90-Day Done Right Promise is stated in writing on every invoice. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Rockland
If you’re just outside Rockland, we cover the surrounding South Shore towns too. We do regular gate work in Abington, Whitman, Hanover, and Holbrook, including the same frost-heave post repairs and electric opener service you’ll find on this page. Wherever you are, the phone rings to a live person. If you’re reading this from somewhere near Rockland, Gate Repair in Rockland is our service hub for the area.
Serving Rockland, MA - Our Local Coverage Area
We’re based in the Rockland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Rockland
Because Rockland’s clay-heavy glacial till absorbs water in late winter and freezes hard, and repeated freeze-thaw cycles physically lift and tilt gate posts. What feels like a hinge or latch problem is usually a post that has moved two to three inches out of plumb. The permanent fix is pulling the post and re-setting it in a concrete footing below the 48-inch frost line, not shimming the hinges or trimming the gate. Call (877) 610-2993 for a free assessment. We’ll tell you if the post is heaving before we quote a dime.
Yes. We cut out the rusted section at the post base, sleeve it with new steel welded on site, and re-set the post if it has heaved. The chain-link fabric and top rail almost never need replacing. In Rockland, where dozens of streets off Union and Webster still have their original mid-century chain-link, this repair is faster and cheaper than a fence company’s quote for new posts and panels.
For most repairs, no. Re-setting an existing post, welding a hinge, replacing an opener, or re-aligning a gate frame does not require a building permit in Rockland. If a gate is being newly installed or if you’re adding a new electrical run for an operator, the town may want an electrical permit on that portion of the work. We’ll tell you upfront if your job needs one and handle whichever side applies.
We level the gate and re-align the rack and pinion so the operator isn’t fighting a two-inch sag. On tight shared driveways where a slide gate runs inches from a house corner, even a small post shift makes the gate scrape or bind. We re-set the post below frost depth, adjust the rack, and set the limits so the gate opens and closes without touching anything. That’s the difference between a gate that works for years and one that shudders and trips the safety stop every other week.
Dig below the frost line, which in Plymouth County means at least 48 inches, and re-set the post in a wider concrete collar with proper drainage so water doesn’t pool at the base and re-freeze. That’s the fix. Shimming hinges or shaving the gate bottom is a one-season band-aid. On a shared driveway off Union Street, we pulled a LiftMaster slide gate that had dropped two inches and bound against its rack after a nor’easter. The hinge post had heaved in the clay, so we dug the deeper footing, re-set the post, and re-aligned the rack. The gate has run smooth through the following winter. Call (877) 610-2993 to get your post checked before the next thaw.
Contact Gatewood Fence & Gate in Rockland
If your gate won’t close flush, your opener is straining, or a post has heaved out of plumb after another Rockland winter, call us at (877) 610-2993. A live person answers around the clock. We’ll give you an honest assessment over the phone, schedule a visit that works for you, and quote the job upfront before any work begins. No runaround, no upcharge bait at the door. Just Hal and his crew, fixing it right the first time, with a 90-Day Done Right Promise on paper.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rockland since 2001.