Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Rockland
Gate parts and welding in Rockland usually come down to two things: a post that has heaved out of plumb over winter, or a hinge that finally gave out after 40 years of New England weather. Most Rockland homes sit on clay-heavy glacial till that freezes, expands, and shoves gate posts up two to three inches every spring. That is why the fix is rarely just a new hinge on the old post. You need the post re-set below frost depth and the hardware matched to the gate’s actual weight. We do that work on site, in your driveway, so the gate never leaves your property. Call (877) 610-2993 and Hal or one of his crew will walk you through it.
Why Gatewood Fence & Gate Is Rockland’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That is the kind of accountability Rockland homeowners tell us they want, especially after a national outfit quotes one number on the phone and a different one at the door. We do not work that way. Every price is agreed before any work starts, and every job carries the 90-Day Done Right Promise in writing. If it is not done right, one call brings Hal back. No runaround.
Our Gate Parts & Welding work across Rockland ranges from a simple hinge swap on a Cape Cod side gate to a full post replacement on a wide farm entrance off Union Street. Crews are local, uniformed, and background-checked. Dispatch and scheduling are coordinated from our Boston office, but the person who shows up at your gate knows Rockland’s soil, its housing stock, and why a post that looked fine in October is suddenly three inches high in April. We answer the phone with a live person 24 hours a day, not a voicemail tree.
Our Gate Parts & Welding Services in Rockland
We work on gates in every part of Rockland, from the older Victorian-era homes near the town center to the mid-century ranch and split-level neighborhoods that spread out along the South Shore in the 1950s through 1970s. Each of those eras has its own common gate problems, and the repair approach is different for each.
Hinge Replacement
When a swing gate in Rockland starts sagging or scraping the ground, the first thing we check is the hinge post, not the hinge itself. On the north and west sides of town, where the soil stays wetter through spring, frost heave tilts hinge posts outward and the gate drops off its latch. Replacing the hinge without fixing the post is a temporary patch. We install heavy-duty hinges matched to the gate’s actual weight and make sure the post is plumb before we hang anything on it.
Post Replacement
This is the dominant repair in Rockland, full stop. The town’s clay-dense glacial till freezes and expands every winter, and without a concrete collar poured below frost depth, the post lifts. On Winding Brook Road, we replaced a rusted hinge post on a 40-year-old chain-link gate that had lifted so far out of plumb the gate would not clear the driveway. We set a new 3-inch galvanized post in a 42-inch frost-depth footing and welded a LiftMaster Rockland Gate Motor & Opener bracket to it. That gate has not moved since.
Rail Repair
Chain-link gates from the 1960s and 1970s are still common across Rockland’s original suburban neighborhoods, and the rails take a beating. Freeze-thaw cycles, nor’easter ice, and decades of kids swinging on the gate all bend and crack rails over time. We can cut out and weld in a new section of rail without pulling the whole panel, or re-tension the fabric if the gate frame is still solid. School yard gates and fence lines along Reed Street and beyond respond well to rail repair over full replacement.
Custom Welding
Hal does on-site welding for one reason: the gate should never leave your driveway unless it absolutely has to. If a hinge ear snapped off a steel frame, or a farm gate cracked at the crossbar, we bring the welder to you. We have fabricated gate brackets, welded solar panel mounts onto old farm entrances, and built custom latch plates for gates that predate modern hardware. You cannot buy those parts off a shelf, and that is exactly why we weld them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rockland
We are certified to service gates and openers from Linear, Viking, Ghost Controls, and DoorKing, among others. For Rockland homeowners with long driveways and no easy power at the gate, solar-ready operators from Ghost Controls and Viking are common choices. We keep the brackets, hinges, rollers, and latch parts those brands use in stock, so we are not waiting on a parts shipment to finish your repair. If it is a brand we service, we have the hardware to fix it.
Common Gate Parts & Welding Problems We See in Rockland Homes
- Frost-heaved posts. Rockland’s clay-rich soil lifts gate posts two to three inches after a hard winter. The gate looks fine, but it will not close flush because the post is no longer plumb. The permanent fix is re-setting in a deeper concrete collar, not shimming.
- Corroded chain-link posts. Many Rockland homes still have their original galvanized chain-link posts from the 1950s through 1970s. After 40 to 60 winters, the steel corrodes right at the concrete collar and eventually snaps at ground level.
- Binding farm gates. Wide gates on older Rockland properties often have manual latch hardware and hinge footings that were never poured below frost depth. Freeze-thaw cycles bind the frame, and the latch stops catching.
- Worn hinges and dropped gates. A gate that drags the ground or unlatches on its own usually has a hinge that is worn through or a post that has tilted. The fix starts at the post, not the gate panel itself.
Pricing for Gate Parts & Welding in Rockland, MA
A straightforward hinge replacement on a residential swing gate in Rockland typically runs $180 to $320, including parts and labor. Post replacement is the bigger job: a galvanized post set in a frost-depth concrete collar usually runs $450 to $850 depending on gate width and how much digging the footing requires. Rail repair on a chain-link gate averages $120 to $280. Custom welding is quoted by the job; a typical bracket weld runs $90 to $200, and a full frame repair on a farm gate starts around $300. Every price is quoted and agreed before work begins. We offer a free estimate on all Gate Parts & Welding work, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Rockland
Gatewood Fence & Gate serves Rockland and the surrounding South Shore towns, including Abington, Whitman, Hanover, and Holbrook. The same 90-Day Done Right Promise and upfront pricing apply everywhere we work. If you are a few minutes over the town line, call (877) 610-2993 and we will tell you straight whether we can get to you same day.
Serving Rockland, MA - Our Local Coverage Area
We’re based in the Rockland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Rockland
Because the hinge post has heaved out of the ground, not because the gate has failed. Rockland’s clay-heavy glacial till freezes and expands through the winter, lifting the post two to three inches. When the ground thaws, the post settles at an angle, and the gate drops off its latch. The permanent fix is re-setting the post in a concrete collar poured below frost depth. Call (877) 610-2993 and Hal will confirm it on site.
Yes. We weld solar opener brackets onto existing gates regularly in Rockland, especially on wider properties where running mains power to the Gate Installation in Rockland is not practical. We match the bracket to the gate’s weight and frame style, and we service Ghost Controls and Viking solar openers among others. The bracket is welded on site, and the gate never leaves your driveway. Estimates are free.
A 3-inch galvanized steel post set in a concrete collar at least 42 inches deep, which is below Rockland’s frost depth. Original mid-century chain-link posts were often set in a shallow concrete ring that cannot resist frost heave. We dig the old footing out, set the new post deeper, and re-hang the gate with new heavy-duty hinges. That ends the seasonal heave cycle for good.
Usually, yes. If the frame is steel and the bend is at the hinge ear or a corner, we can often weld a reinforcement plate and re-hang the gate the same day. If the post itself snapped at ground level, that requires digging a new footing, which may take us into the next day depending on soil conditions. We will tell you honestly before we start. Call (877) 610-2993 and describe what you are looking at.
Yes. When we install a new operator on an older gate in Rockland, we include the safety photocells and can add Gate Access Control - Rockland like an exit loop or intercom wiring at the same time, depending on what the entrance needs. On a wide gate, especially one serving a long driveway, the photocells are not optional. We set them so the gate stops and reverses if anything is in the path, and we test that before we leave.
If your gate is sagging, stuck, or sitting on the ground in Rockland, call (877) 610-2993. Hal or one of his crew will pick up, talk you through it, and get it fixed. Free estimates, upfront pricing, and a 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rockland since 2001.