Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Riviera Beach
A broken gate in Riviera Beach needs attention fast, especially when salt air has been eating at the hinges and the panel won’t close. Most gate repairs in Riviera Beach run between $180 and $650 depending on what’s failed, and we can typically get to you the same day you call. Our Gate Repair crew works throughout the 33404 corridor from the Broadway neighborhoods over to Singer Island, and we answer the phone live around the clock. Call (877) 610-2993 and you’ll talk to a person, not a menu.
Hal Gatewood started this company in 2001 because he kept finding gates that had been “fixed” with parts that didn’t belong and hinges that were already failing. That still drives how we work in Riviera Beach. We weld on site, we tell you honestly when a repair will hold and when it won’t, and every job comes with our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Riviera Beach’s Preferred Gate Repair Company
We’re not a national franchise with a rotating crew. Hal Gatewood’s name is on the shop, the shop has a published address and license number, and the person who shows up has been doing this work for years, not weeks. When we repair a gate in Riviera Beach, we know what we’re up against: salt spray off the Atlantic on one side and Intracoastal humidity on the other. That changes the hardware you need, and we stock marine-grade aluminum and 316 stainless on the truck as a baseline.
Calls from Riviera Beach get a live person, 24/7. If your gate is stuck open at midnight on Singer Island, you won’t get a voicemail. You’ll get Hal or someone on his crew who can tell you what’s likely wrong and when we can be there. Every Riviera Beach customer gets a written price before work starts, and we honor it. We also offer a free second opinion on any written estimate from another company, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Our reputation in Riviera Beach has been built one gate at a time. The same faces show up at the Broadway corridor homes, the Blue Heron streets, and the Singer Island condos. That’s the oldest accountability there is: people see us again at the hardware store.
Our Gate Repair Services in Riviera Beach
Electric Gate Repair
Electric gate operators and Riviera Beach Gate Motor & Opener systems fail more often than they should, and it’s almost always tied to moisture ingress or surge damage. We service LiftMaster, Viking, DoorKing, and Ghost Controls operators, including the older models that national companies won’t touch. If the board can be repaired instead of replaced, we repair it and tell you exactly what that saved you over a full replacement.
Automatic Gate Repair
An automatic gate with Gate Access Control in Riviera Beach issues-won’t open, won’t close, or reverses for no reason-is usually a sensor, loop detector, or control board problem, not a motor problem. In Riviera Beach, salt corrosion on terminal connections is a regular culprit. We trace the control circuit, replace what’s actually failed, and adjust the limits so the operator stops working against itself.
Hinge & Post Repair
This is where we do more work than anywhere else in Palm Beach County. Riviera Beach’s 1950s to 1970s CBS homes were built with masonry pilasters that hold gate posts, and salt air works its way into the anchors until they snap under wind load. We cut out the corroded footing, set new 316 stainless posts in marine-grade concrete, and hang the panel level. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A gate that drags on the latch side or scrapes the driveway didn’t bend itself; the hinge post shifted or the hinges wore into an oval. We re-plumb the post, replace hinges with marine-spec hardware, and reset the panel so the latch catches clean. In Riviera Beach, we check for corroded post anchors first because that’s what the ground conditions out here dictate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Riviera Beach
We’re certified to service nine major gate brands, and on Riviera Beach jobs we most often see Linear, Viking, DoorKing, and Ghost Controls operators through our Gate Parts & Welding in Riviera Beach services. We keep common control boards, photocells, and receiver modules for these brands on the truck, which means we can often finish a Riviera Beach repair in one visit instead of ordering a part and coming back next week. If your operator is obsolete, we’ll tell you straight: sometimes a retrofit kit keeps it running for years, and sometimes replacement is the cheaper answer. We won’t sell you a new opener just because it’s easier for us.
Common Gate Repair Problems We See in Riviera Beach Homes
- Salt-eaten hinge pins and brackets. Atlantic spray from the east and Intracoastal humidity from the west cause galvanic corrosion that turns standard zinc hardware into powder in under two years. We replace with 316 stainless as standard, not an upsell.
- Surge-damaged control boards. South Florida lightning storms hit Riviera Beach hard, and a close strike can take out a LiftMaster or FAAC board, the loop detector, and the keypad entry in one shot. We test the whole circuit, not just the obvious part.
- Crumbling post anchors on CBS pilasters. Older masonry columns absorb moisture and the embedded steel anchors rust and expand, cracking the block. This is the single most common failure we repair between Broadway and Blue Heron.
- Marina slide gates stuck mid-travel. Along the Riviera Beach Marina waterfront, cantilever slide gates carry boat-trailer traffic through constant salt spray. Standard residential track and wheel kits wear out in 18 to 24 months. We keep commercial marine-spec replacement assemblies on the truck as a routine item.
Pricing for Gate Repair in Riviera Beach, FL
A hinge replacement on a typical Riviera Beach swing gate runs $180 to $320 depending on post condition. Post excavation and reset runs $400 to $850. Control board replacement on a Linear or DoorKing operator typically runs $250 to $550 installed. Full gate realignment, including hinge replacement and panel reset, runs $350 to $650. We quote every price up front, in writing, before any work starts, and that number is the number you pay. No trip charge inside Palm Beach County, and we’ll subtract $40 from any repair over $200. Call (877) 610-2993 for a free estimate, and we’ll ask you the right questions over the phone so we bring the right parts on the first trip.
We Also Serve Cities Near Riviera Beach
If you’re just outside the 33404 area, we also run service to Lake Park, North Palm Beach, Palm Beach, and West Gate. The same crew, the same live answer on the phone, and the same 90-Day Done Right Promise. You can read more about our work across the region on our Riviera Beach service page.
Serving Riviera Beach, FL - Our Local Coverage Area
We’re based in the Riviera Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Riviera Beach
You need 316 stainless or marine-grade aluminum hinges and fasteners, not the zinc-plated steel most gates shipped with. The Intracoastal humidity from the west and Atlantic spray from the east create a galvanic corrosion cell on mixed metals, and standard hinges in this zone can seize or snap within two years. We keep the marine-spec hardware on the truck because on the Blue Heron side, it’s not an upgrade; it’s the minimum that holds. Call (877) 610-2993 and we’ll tell you what your gate needs.
Usually the obstruction sensors or the limit settings, and in Singer Island’s oceanfront garages, salt buildup on the sensor lenses and track is a daily event. The gate sees reflected glare off wet concrete in the morning, trips the sensor, and reverses or stalls. We clean the sensor lenses, check the track alignment, replace corroded limit switches, and adjust the controller so the gate doesn’t fault on a puddle. Call us for a same-day visit on Singer Island.
Yes, in most cases you can add an external entrapment protection device like a monitored photocell pair and an edge sensor to an older operator without replacing the entire gate. The gate operator’s control board has to support the sensor wiring, and older boards sometimes need a retrofit module. We’ve done this on dozens of older Riviera Beach CBS homes, and it’s almost always cheaper than a full replacement. Get a written quote before you decide either way; our estimates are free.
Because the combination of constant salt spray and heavy boat-trailer loads destroys standard track and wheel assemblies in 18 to 24 months. Residential-grade parts simply were not built for that duty cycle, and the corrosion accelerates the wear. We service those accounts with commercial marine-spec wheels and sealed bearings, and we keep the replacement kits on the truck because we know what those gates go through. If you manage a marine facility in the 33404 corridor, call (877) 610-2993 for a maintenance quote.
Almost never. A sag at the latch side means the hinge post has moved or the hinges themselves have worn, not that the panel is ruined. We re-plumb the post, replace the hinges, and reset the panel. If the post has rotted through at the base, we replace the post, not the gate. A gate sags in the hinge post, not in the middle, and that is where we start. Call us for an honest assessment; we’ll tell you if replacement is ever actually cheaper.
Call Gatewood Fence & Gate for Gate Repair in Riviera Beach
If your gate is down in Riviera Beach, call (877) 610-2993 now. A live person answers, 24/7. We’ll ask what the gate is doing, what it sounds like, and where you are in the 33404 area, then get you on the schedule with a real arrival window. Our written estimate is free, our price is the price, and our 90-Day Done Right Promise means if it’s not done right, we come back and make it right. Hal Gatewood’s name is on the shop and on every invoice, and that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Riviera Beach since 2001.