Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in West Palm Beach, FL
Gate repair in West Palm Beach usually costs between $195 and $680 depending on whether we’re replacing a broken hinge, rebuilding a sagging frame, or swapping a salt-corroded operator board. Most repairs here are done same-day, and a live person answers when you call (877) 610-2993. We know the difference between a 1920s El Cid wrought-iron pedestrian gate and a 1990s HOA vehicular slide system, because we’ve worked on both this week.
Why West Palm Beach Homes Are Different
West Palm Beach sits right against Lake Worth Lagoon and the Intracoastal Waterway, and that geography punishes gate hardware. Within a mile or two of the water, salt-laden air attacks steel frames, spring hinges, and motor housings far faster than the manufacturer’s service intervals anticipate. We see operators in El Cid and the waterfront communities that seize up at year eight or ten, when the same unit in Wellington would run fine for another decade.
Then there’s hurricane season, June through November. Power surges from tropical storms routinely fry gate operator circuit boards across West Palm Beach, and wind damage to large vehicular gates creates a big wave of repair calls after every significant storm. Many of the HOA entrance gates installed across the city’s 1990s communities used Eagle, Linear, and HySecurity operators that were dominant in the South Florida market at the time. Those proprietary logic boards and loop detector modules are increasingly discontinued, which forces a real conversation: source a rare part through a specialty distributor, or replace the whole operator. We’ll walk you through that math honestly.
The housing stock splits two ways. Historic districts like Flamingo Park and El Cid are full of 1920s Mediterranean Revival homes with ornamental wrought-iron pedestrian gates that need period-sensitive repair. The western ZIPs, particularly 33411 and 33412, hold some of the densest concentrations of HOA-managed gated communities in Florida, built during the 1980s and 1990s boom. Those vehicular slide and swing gates are now hitting the 20-to-30-year failure threshold all at once.
Gate Repair in West Palm Beach
Gate repair in West Palm Beach comes down to two things: salt corrosion near the water, and electrical failures in the HOA-heavy western neighborhoods. We fix both, on site, with a quote you approve before any work starts. Hal Gatewood’s name is on the shop, and the person who shows up in your driveway is someone you’ll see again at the hardware store. If you need Gate Repair, call (877) 610-2993 and you’ll get a live person, not a voicemail tree.
Electric Gate Repair
Electric gate repair in West Palm Beach often comes down to the operator: the control board, the motor, the limits, or the power supply. In communities near the Intracoastal, salt air creeps into motor housings and eats connections. In western ZIP codes like 33411 and 33412, hurricane-season power surges fry boards. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Electric gate repairs start around $150 for diagnostics and minor fixes like limit switch adjustments, while a full operator replacement runs $850 to $2,400 depending on brand, swing type, and site conditions.
Automatic Gate Repair
Automatic gates in West Palm Beach get daily abuse from heat, rain, salt, and wind. We repair slide gates, swing gates, barrier arms, and the sensors and loop detectors that tell them when to open. If your gate opens but won’t close, or reverses for no reason, there’s a good chance a photocell or loop detector is failing. A typical automatic gate sensor or loop detector repair runs $150 to $300. We test entrapment protection devices after every operator replacement because it’s Florida law, and because a gate that closes on a car or a person is a liability no HOA wants to carry.
Hinge and Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. In West Palm Beach, salt air near Lake Worth Lagoon oxidizes steel gate frames and hinge pins within a mile or two of the water. We cut out the rusted section, weld in new steel on site, and rebuild the post footing if saturated ground has undermined it. A typical hinge and post repair in West Palm Beach runs $180 to $340. Fix the panel without the post and you’ll fix it twice. We’d rather fix it once.
Gate Realignment
Slide gates derail from their rack and pinion track when post footings shift in sandy, low-lying soil after heavy rain. West Palm Beach’s master-planned subdivisions sit on exactly that kind of ground. Gate realignment usually lands between $200 and $400 depending on track condition and footing work. We re-set the posts, re-align the track, and re-tune the limit switches so the gate travels smoothly again. A realigned gate shouldn’t grind, shudder, or stop two feet short of the post.
Why do gate operators near the Intracoastal corrode faster than inland?
Salt-laden air from Lake Worth Lagoon and the Intracoastal Waterway settles on control boards, terminals, and motor housings. Within one to two miles of the waterfront, that salt accelerates corrosion dramatically, seizing hinge pins and eating connector contacts years before an inland unit would show the same wear. We see operators in El Cid fail at year eight when the same model in Wellington would run another decade.
Why does my HOA gate need a full replacement instead of a board swap?
Nineties-era Eagle, Linear, and HySecurity operators used proprietary logic boards and loop detector modules that are now largely discontinued. When the board fries, especially after a storm surge, there’s often no direct replacement available. We source rare parts through specialty Florida distributors when possible, but sometimes the board is gone and the remaining components are near end-of-life anyway. At that point, a full operator replacement is the honest recommendation.
Gate Installation in West Palm Beach
Gate installation in West Palm Beach typically costs $2,400 to $7,800 for a standard driveway gate with operator, and we quote the exact price before any work begins. If you live in a 1990s HOA community off Northlake or Okeechobee Boulevard, you’re likely dealing with a gate operator that’s quietly failing after two decades of salt air and hurricane-season power surges. That’s our specialty, and our Gate Installation work starts with a free measurement and a written price. Call (877) 610-2993 and a live person picks up, 24/7.
Driveway Gate Installation
A new driveway gate in West Palm Beach runs $3,200 to $7,800 installed, depending on material, width, and whether you need a fresh operator or a new concrete pad. For homes in the western ZIPs like 33411 and 33412, where HOA communities dominate, we install slide and swing gates that match your community’s existing aesthetic and operator compatibility. We measure, quote, and set the schedule in writing before any work starts.
Pedestrian Gate Installation
Historic districts like El Cid and Flamingo Park are full of 1920s Mediterranean Revival homes with ornamental iron pedestrian gates that deserve period-sensitive replacement. A new custom pedestrian gate in West Palm Beach typically runs $800 to $2,400, with the higher end covering custom scrollwork and weather-resistant powder coating. We match the original style rather than bolting on something that looks like it came from a box store.
Sliding Gate Installation
Sliding gates are the workhorse of West Palm Beach’s newer subdivisions, where space is tight and vehicles queue at HOA entrances. A new sliding gate starts around $3,800 and can reach $8,000 for a heavy steel frame with a V-track and cantilever design. The salt air near Lake Worth Lagoon makes galvanized steel and marine-grade hardware worth the modest upcharge, especially within a mile or two of the Intracoastal.
Do you handle HOA gate installations in the western ZIP codes?
Yes, we regularly install and repair gates in HOA communities throughout 33411 and 33412, including entrances near Ibis Golf & Country Club and similar master-planned neighborhoods. We coordinate with property managers on scheduling, operator selection, and access control integration. Call (877) 610-2993 to get a measurement on the books.
Is gate installation more expensive in West Palm Beach than inland cities?
Slightly, yes, and the reason is the salt air. Marine-grade hardware and powder coating add roughly 10 to 15 percent to material costs compared to Wellington or Boca Raton, but those upgrades mean your gate lasts 15 to 20 years instead of 8 to 10. We quote West Palm Beach jobs with the right materials the first time, not the cheapest option that fails early.
Gate Motor & Opener in West Palm Beach
Gate motor and opener repair in West Palm Beach typically runs $185 to $425 for most board replacements, gear swaps, and limit switch work, and we can usually have someone to your property the same day you call. Salt air from Lake Worth Lagoon and the Intracoastal eats gate hardware faster here than almost anywhere else in Palm Beach County, so a sluggish opener on a Monday is often a dead board by Thursday. Our Gate Motor & Opener work covers every major brand, and we stock common boards on the truck.
Motor Repair
Most gate motor failures in West Palm Beach trace to one of three things: a corroded control board, worn drive gears, or a power surge that cooked something during a June-to-November storm. We open the unit, diagnose on site, and give you a price before any work happens. For a typical board replacement on a LiftMaster or Elite slide operator, you’re looking at $185 to $340 including parts and labor. If a gear or limit switch is the culprit, expect $150 to $275. Many repairs are same-day because we stock common boards and capacitors locally.
Motor Installation
New installations in West Palm Beach should be specified for salt exposure, not just picked off a shelf. That means a galvanized or stainless chassis, sealed connector housings, and a battery backup that keeps the gate functional when FPL cuts out during a tropical storm. A standard swing or slide gate operator installation runs $1,200 to $2,800 depending on the gate’s weight and whether existing conduit is usable. Every install includes the safety photocells and the 90-Day Done Right Promise.
Slide Motor Service
Slide gates take a beating in West Palm Beach because they’re the default at HOA entrances, and they operate hundreds of cycles per day. We see broken chain links, bad tension springs, welded contactors, and motors that run but won’t move the gate. A slide motor repair typically lands between $195 and $380. If the rack itself is chewed up from years of salt-grit abrasion, we can weld and repair on site rather than quoting you a full rail replacement.
How do power surges from West Palm Beach storms affect my gate motor?
A power surge during a June-to-November tropical storm in West Palm Beach can fry a gate operator’s logic board, loop detector, or transformer without any visible damage to the rest of the unit. The gate may still have power but won’t respond to commands, or it may move erratically. We recommend a whole-operator surge protector and a healthy battery backup for every gate in West Palm Beach, especially in the western HOA ZIPs.
Can you still repair motor operators installed in 1990s HOA communities?
Yes, in most cases we can. Many of the 1990s-era HOA entrance gates in ZIP codes 33411 and 33412 used Eagle, Linear, and HySecurity operators whose proprietary parts are now discontinued. We source rare logic boards and loop detector modules through specialty Florida distributors, and we’ve gotten 25-year-old slide gates back in service within 48 hours. When a part is truly gone, we tell you straight.
Gate Access Control in West Palm Beach
Replacing or repairing a gate access system in West Palm Beach usually costs between $380 and $2,800 depending on whether you need a new keypad, a phone entry unit, or a full operator and controller replacement. That price is locked in writing before any work starts, so there are no surprises when it’s time to settle up. We’ve worked our way through the gated communities off Okeechobee Boulevard, and our Gate Access Control work covers everything from a single keypad to a full HOA entrance.
Keypad Entry
Keypad entry systems in West Palm Beach face a specific problem: direct afternoon sun beating on a west-facing gate post near the Intracoastal heats the keypad housing to the point where membrane switches delaminate and fail years earlier than manufacturers intend. A new residential keypad for a West Palm Beach gate typically runs $280 to $650 installed, including programming of all existing user codes. For HOA and commercial entrances we install stainless steel keypads rated for full sun exposure and salt spray.
Remote Control
Remote control and receiver replacement is the most common access job we do across West Palm Beach. In the master-planned communities west of Military Trail and out toward 33411 and 33412, many original receivers from the 1990s are losing range or stopping entirely, and the remotes themselves have battery contacts so corroded from humidity that new batteries don’t help. A typical receiver replacement with two programmed remotes runs $240 to $420 in West Palm Beach. We program the new remotes on site and delete any lost or stolen codes.
Phone Entry
Phone entry systems are the heart of most West Palm Beach gated entries, and we service every style from simple two-wire intercoms to full multi-tenant telephone boards that dial your cell when a visitor presses the call button. Salt air along Lake Worth Lagoon eats the exposed speaker cones and microphone gaskets on these units. Expect $450 to $1,300 for a full phone entry replacement, depending on how many residents the system serves and whether the existing wiring can be reused.
How does salt air affect keypad and card reader systems near the waterfront?
Salt-laden air settles on exposed terminals and button contacts inside keypad housings and card reader goosenecks. Within a mile or two of Lake Worth Lagoon, that fine saline film causes intermittent faults: keypads that work sometimes, readers that drop credentials randomly. The fix is usually cleaning and re-sealing the connections, not replacing the unit. We weatherproof every connection point on coastal jobs.
Do you integrate access control with existing HOA gate operators?
Yes. Telephone entry, keypads, card readers, and vehicle loop detectors are standard parts of the gate access work we handle in West Palm Beach, especially at HOA entrances. The access control integrates with the same operators we service, so you get one crew and one clear price for the whole job. We test the full system end to end before we leave.
Gate Parts & Welding in West Palm Beach
Gate parts and welding in West Palm Beach is its own animal. Salt air off Lake Worth Lagoon eats through standard hardware years ahead of schedule, and the city’s older HOA gates are failing in waves. If your hinge post is rusted through, your swing gate drags at the latch, or a weld cracked on your slide gate frame, we fix it on site without hauling your gate to a shop. Our Gate Parts & Welding work means your gate stays in your driveway, and Hal Gatewood is the one holding the torch.
Hinge Replacement
Salt air near Lake Worth Lagoon is hard on hinges. Within a mile or two of the water, standard zinc-plated hinges start seizing and flaking in three to five years, not the ten to fifteen manufacturers claim. Hinge replacement on a residential pedestrian gate typically runs $180 to $340, including fabrication and stainless fasteners. We replace hinge barrels, strap hinges, and spring hinges with stainless or hot-dip galvanized assemblies, sized to the gate’s swing weight.
Post Replacement
A gate sags in the hinge post, not in the middle. In West Palm Beach’s western ZIPs, 33411 and 33412 especially, we regularly pull gate posts and find the footing rotted or rust jacked from storm water and irrigation run-off. Post replacement runs $350 to $850 depending on whether we’re just resetting a post or cutting out and rebuilding a footing. For ornamental gates in historic districts like El Cid, we match the post profile and finish so the replacement doesn’t look like a patch.
Rail Repair and Custom Welding
Slide gates in West Palm Beach’s master-planned communities take a beating from humidity and salt. The bottom rail collects condensation, rusts from the inside, and then the rollers misalign and chew up the track. Rail repair and re-welding cracks typically runs $220 to $480 per section. Sometimes the right fix is fabricating a piece that doesn’t exist in a catalog: a cracked aluminum picket, a steel frame extension for a widened driveway, a reinforcement plate on a fatigue crack. Custom welding starts around $150 and goes up based on materials and time on the torch.
Why do so many HOA swing gates in ZIP 33411 sag after 20 years?
Because the hinge posts were set with plain steel footings and standard zinc hardware in the 1990s, and both are now failing together. The post rusts at ground level, the hinge barrels seize, and the gate drops a quarter inch at the latch. We fix it by replacing the post, re-welding the hinge barrels, and switching to stainless fasteners, so the repair outlasts the original installation.
Do historic wrought-iron gates in Flamingo Park need different welding than modern gates?
Yes, they do. Old wrought-iron has a fibrous grain structure that behaves differently under heat than modern mild steel, so you weld at lower temperatures and use a filler rod that matches the original metal. A lot of the original scrollwork in Flamingo Park was hand-forged, and we repair it gently rather than cutting sections out. The same care goes into El Cid’s older pedestrian gates.
Brands We Service in West Palm Beach
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators across West Palm Beach. Common boards and capacitors for Viking, Ghost Controls, and DoorKing units are stocked locally so we’re not waiting on a distributor when your gate is down. See our brands for the full list of what we work on.
Pricing for Gate Repair in West Palm Beach, FL
| Service | Typical range in West Palm Beach |
|---|---|
| Hinge and post repair | $180-$340 |
| Gate realignment | $200-$400 |
| Electric gate diagnostics and minor fixes | $150-$300 |
| Full operator replacement | $850-$2,400 |
| Weld and rust repair on ornamental iron | $150-$450 |
| Driveway gate installation | $3,200-$7,800 |
| Pedestrian gate installation | $800-$2,400 |
| Motor repair (board, gear, limit switch) | $185-$425 |
| Motor installation | $1,200-$2,800 |
| Keypad replacement | $280-$650 |
| Phone entry system replacement | $450-$1,300 |
| Post replacement | $350-$850 |
Salt exposure and discontinued 1990s HOA parts push prices up in West Palm Beach more than anything else. Every quote is written down and agreed before any work starts, and $40 off any repair over $200 applies automatically.
Neighborhoods We Serve in West Palm Beach
Our trucks cover the full city, and we’re usually at your gate within a couple hours of your call, depending on the day’s schedule. We’re regularly in these West Palm Beach neighborhoods:
- El Cid
- Flamingo Park
- Ibis Golf & Country Club
- Riverwalk
- Villages of Palm Beach Lakes
Service Area - Cities Near West Palm Beach
Beyond West Palm Beach, FL, we serve the surrounding communities across Palm Beach County: West Gate, FL, Palm Beach, FL, Palm Springs, FL, Riviera Beach, FL, and Lake Worth Corridor, FL. Scheduling is coordinated from our Miami area office, and crews serve West Palm Beach locally, so you’re never waiting on someone from out of state.
Serving West Palm Beach, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve West Palm Beach and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the West Palm Beach coverage area; if your address is on it, we can help.
Also serving nearby: West Palm Beach, FL, West Gate, FL, Palm Beach, FL, Palm Springs, FL, Riviera Beach, FL, Lake Worth Corridor, FL.
FAQs About Gate Repair in West Palm Beach
Usually within a couple hours, depending on the day’s schedule. Emergency repairs get priority, especially after a storm or when a gate won’t close and a property is exposed. Call (877) 610-2993 and you’ll speak with a live person who can tell you exactly when someone will be there.
In most HOA-managed communities, entrance gates are common-area property and the HOA handles repairs directly. For a homeowner’s own driveway gate inside an HOA, you may need to match community standards for style and finish. We coordinate with property managers regularly and can help you get the right paperwork in order.
Yes. We prioritize post-storm gate failures across West Palm Beach, from dead operators to wind-damaged swing gates to derailed slide gates. After a significant storm, we work through the backlog as fast as we can, and we stock common boards and safety edges so a repair doesn’t wait on a parts shipment. Call (877) 610-2993 and we’ll get you on the list.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Palm Beach Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth