Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rendon
Gate repair in Rendon runs $180 to $340 for most hinge, post, and latch work, and same-day service is usually available when you call before noon. We serve the 76140 ZIP from ranch acreage off Rendon Road to the newer subdivisions behind the high school. Hal Gatewood has been fixing gates since 2001, and the person who answers your call is the same person who will show up at your driveway. Call (877) 610-2993 and you’ll get a live voice, not a menu.
Why Gatewood Fence & Gate Is Rendon’s Preferred Gate Repair Company
We work both sides of Rendon’s fence line, literally. The older acreage properties with long gravel drives and heavy pipe-welded swing gates need one kind of repair. The new subdivisions with aluminum ornamental gates on builder-spec operators need another. Most gate companies are good at one or the other. We’ve been doing both on the same street since before the subdivisions were platted, and that dual experience shows up in how fast we diagnose the problem.
Hal Gatewood’s name is on the shop and on every invoice. His address is published, his license number is published, and if you want to drive to the shop and look him in the eye before you hire him, you can. That’s the oldest accountability there is, and it still works. Rendon homeowners have called us after a national outfit quoted one price on the phone and charged another at the door. We quote a price, you agree to it, and that’s the price. No surprises at the end of the job. No trip charge inside the county. Every repair carries our 90-Day Done Right Promise in writing; if it’s not done right, one call brings Hal back.
Our Gate Repair Services in Rendon
Hinge & Post Repair
A sagging gate fails at the hinge post, not in the middle, and that’s where we start. In Rendon’s 76140 ZIP, gate posts on older acreage properties were often set without deep footings in expansive Vertisol clay. After a wet winter, that clay swells and heaves posts out of alignment. By the dry May-to-October stretch, the clay shrinks and posts tilt or twist until the latch no longer meets the strike. Fixing the panel without fixing the post means you’ll fix it twice. We set deeper footings, true the hinge post, and hang the gate so it clears the strike smoothly.
Gate Realignment
When a gate scrapes the ground, binds against the latch, or refuses to close fully, the panel is usually fighting the post. Rendon’s black gumbo soil moves posts several inches seasonally, and every inch of post movement translates to a gate that’s out of tolerance. We realign the hinges, adjust the strike, and set the operator limits so the gate travels cleanly. On older ranch gates with hand-set concrete posts, this often means digging out the post, setting it deeper, and repouring the footing before we touch the panel.
Automatic Gate Repair
Automatic gate operators in Rendon fail for predictable reasons. On the newer subdivision homes, production builders often spec minimum-grade aluminum hardware that strips gears when the post shifts even slightly. On the acreage properties, the problem is usually power, span, or weather. Wide farm gates need heavy-duty operators with enough torque to move a few hundred pounds of tubular steel. High-wind events from spring severe weather bend cantilever slide tracks and snap gate arms on exposed rural parcels. We repair, rebuild, and when the operator is genuinely beyond saving, we say so plainly and give you a price for replacement before we do anything.
Electric Gate Repair
Electric gate problems in Rendon fall into two camps: power delivery and control wiring. Solar setups on remote acreage entrances fail when battery banks age or panels get shaded. Hardwired operators on subdivision homes fail when the control board takes a surge or the safety edges wear out. We troubleshoot the whole system, from the panel to the actuator, and we stock parts locally so we’re not waiting a week on a shipment. Hal services nine major brands, including Viking, DoorKing, Elite, and Ghost Controls, so chances are your operator is one we already know well.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Rendon customers, that means we can usually rebuild or repair the operator you already have rather than telling you to buy a new one. On a long gravel driveway off Rendon Road, we serviced a heavy tubular-steel swing gate whose post had shifted in the black gumbo. The gate operator, a LiftMaster, was stripping gears because the panel sagged against the latch. We installed a deeper post footing, realigned the hinge post, and rebuilt the rack and pinion so the gate cleared the strike smoothly. That’s the repair-first approach, and it saves Rendon homeowners real money.
Common Gate Repair Problems We See in Rendon Homes
- Posts heaving in the clay. Rendon’s expansive Vertisol clay swells with spring rains and shrinks in the DFW summer drought, moving gate posts several inches. This throws swing gates out of alignment and strips operator gears after a wet winter.
- Cantilever slide tracks bending in high winds. Exposed rural parcels catch the full force of spring severe weather. Bent tracks jam rollers and force the motor to overwork until it burns out.
- Builder-grade aluminum hardware failing early. Newer 2000s-to-2020s subdivision homes often have aluminum ornamental gates on operators installed by production builders who spec minimum-grade hardware. When the same clay movement shifts those post footings, the cheap components fail first.
- Latch and strike mismatch. On older acreage properties along Rendon Road and surrounding rural routes, a wet winter followed by a dry summer twists posts enough that the latch no longer meets the strike. It’s a seasonal callback pattern we anticipate every May and October.
Pricing for Gate Repair in Rendon, TX
Gate repair in Rendon runs on honest ranges, not vague “it depends” answers. Hinge and post repair typically runs $180 to $340 depending on whether we’re resetting a post or rebuilding a footing. Gate realignment runs $120 to $260. Automatic gate repair, including operator diagnostics and gear replacement, runs $220 to $500 for most jobs. Full operator replacement on a wide farm gate can run $900 to $2,800 depending on brand and span. Every price is quoted and agreed before any work starts, in writing. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Rendon
If you’re outside the 76140 ZIP, we also cover the surrounding area. Our Gate Repair team serves Everman, Kennedale, Forest Hill, and Burleson, and you’ll get the same local expertise and the same 90-Day Done Right Promise. Read more about our work in this area on our Gate Repair in Rendon page.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Rendon
Your gate post is moving in the soil. Rendon’s expansive Vertisol clay swells when it absorbs winter rain, which lifts and tilts the post. When summer drought hits, the clay shrinks and the post settles into a new position, often twisted just enough that the latch no longer meets the strike. The fix is a deeper post footing set below the active clay zone, not just re-hanging the gate. Call (877) 610-2993 and we’ll set it right so it stays right through next spring’s rains.
Yes, but only if the system is sized for the gate’s weight and span. A heavy tubular-steel farm gate needs a solar operator with enough torque, a properly sized battery bank, and a panel positioned for full sun. Builders and big-box installers often undersize these systems, which is why so many solar operators fail within two years. We size the operator to the actual gate, not the brochure. Call (877) 610-2993 for a free site visit and a written price.
The cantilever track bends first. Spring severe weather hits exposed rural parcels hard, and the track is the weakest point. Once it bends, the rollers jam and the motor overworks until it strips or burns out. We straighten or replace the track, then check the motor and gearbox for damage. Call (877) 610-2993 after the next storm passes and we’ll inspect it before a $400 motor turns into a $2,800 replacement.
Because the post shifted, and the operator was fighting the gate instead of moving it. Production builders often spec minimum-grade aluminum gate hardware and shallow post footings on newer subdivision homes. When Rendon’s clay moves the post, even slightly, the gate binds and the gears strip. We reset the post on a deeper footing and rebuild or replace the damaged operator. Call (877) 610-2993 and we’ll show you exactly where it failed.
We start at the post. The panel sags because the hinge post has moved or the hinge hardware has loosened under the weight of the gate. In Rendon, the cause is usually the clay heaving the post out of alignment. We excavate around the post, set it deeper with proper concrete, true it vertically, and re-hang the gate on new hinges if needed. Then we adjust the strike so the latch meets squarely. Call (877) 610-2993 for a free estimate, and we’ll tell you exactly what your gate needs before we touch a single bolt.
Contact Gatewood Fence & Gate in Rendon
If your gate is sagging, scraping, refusing to close, or stripping gears, call (877) 610-2993 today. A live person answers 24 hours a day, seven days a week. We’ll schedule a time that works for you, give you a written price before any work starts, and stand behind the job with the 90-Day Done Right Promise. Hal Gatewood has been doing this since 2001, and his name is on the shop, not a franchise manual. Serving the 76140 ZIP and all of Rendon.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rendon since 2001.