Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Rendon
A gate motor or opener in Rendon usually costs between $450 and $1,900 depending on whether we’re repairing an existing operator or installing a new one, and most repairs on this side of Tarrant County get finished the same day we show up. If your gate is stuck open off Rendon Road or the opener just hums and won’t move, call (877) 610-2993 and a live person answers, day or night. We know this area’s older acreage gates and the newer subdivision operators, because we work on both every week.
Rendon’s soil is the real reason gate motors fail here more than in a lot of other places. That black gumbo clay swells every spring and shrinks every August, and a gate post that shifts two inches is enough to strip gears, jam slide tracks, and burn out a motor that was fine six months ago. We plan for that. Most companies don’t, until they’re standing in your driveway scratching their heads.
Why Gatewood Fence & Gate Is Rendon’s Preferred Gate Motor & Opener Company
Hal Gatewood started fixing gates in 2001, and his name is still on the shop. That matters when you live in an unincorporated pocket like Rendon, where the big national outfits might quote a low price over the phone and send somebody who’s never seen a pipe-welded ranch gate. We’re not that. We schedule from our Dallas-Fort Worth office and our crews serve Rendon directly, which means the person who shows up knows what a 1990s gate post set in shallow concrete looks like, and why it’s leaning after last spring’s rains.
We put the 90-Day Done Right Promise on every job, in writing. If it’s not right, one call brings Hal back. No runaround, no fine print. We also answer the phone with a live person 24 hours a day, seven days a week. Not a voicemail tree. Not a chatbot. You call, somebody picks up, and that person can actually tell you when we’ll be out to your place in the 76140 ZIP.
Rendon customers have been calling us for years about the same two things: an old ranch gate that won’t latch, or a newer aluminum gate where the production-builder operator gave out. Both are familiar. Both get fixed right, usually on the first trip. And we don’t swap parts that don’t need swapping. If the motor’s fine and the post is the problem, we’ll tell you that and fix the post.
Our Gate Motor & Opener Services in Rendon
Our Gate Motor & Opener work in Rendon covers the full range, from old swing-gate operators that predate modern safety sensors to brand-new slide motors on fresh subdivision builds. Here’s what we handle most often around here.
Motor Repair
Most motor repairs in Rendon come down to one of a few things: stripped gears from a post that shifted in the clay, a control board fried by a lightning strike or a power surge, or limit switches that drifted out of adjustment so the gate doesn’t know where to stop. We diagnose on site, quote a firm price before any work starts, and most repairs are done the same visit. We carry common boards and gears for LiftMaster, DoorKing, Linear, and Viking so you’re not waiting a week on a part.
Motor Installation
New motor installation in Rendon starts with a free measure and a written price. We don’t rush this part, because on older acreage lots the existing post condition and gate weight dictate what operator will actually last. A heavy tubular-steel swing gate needs a different motor than a lightweight aluminum one, and we check the post footings before we recommend anything. If the post is compromised, we’ll tell you, because bolting a $900 motor onto a post that’s about to lean is throwing money away.
Linear Motor
Linear operators are common on the slide gates throughout Rendon’s rural routes, and we service the brand regularly. The mechanical drive is built to handle some abuse, but the plastic gears and limit switches wear out, especially when the gate track has sagged or the rollers are binding. We keep Linear parts in stock, and a typical Linear motor rebuild or replacement on a Rendon slide gate runs $650 to $1,400 depending on the model and whether we’re reusing the existing mount.
Slide Motor
Slide gates are everywhere on Rendon’s horse properties and long gravel driveways, and the motor problems here are distinctive. Cantilever tracks bend in spring windstorms, rollers seize from dust and grit, and the motor overheats trying to push a gate that’s fighting its own track. We repair the track and the motor together, because fixing one without the other means you’ll call us again in six months. A full slide motor replacement in Rendon, including track realignment, typically runs $800 to $1,900.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We’re certified to work on nine major gate brands, and around Rendon we see a lot of DoorKing on the older acreage places and Linear or Ghost Controls on newer builds. We also service Viking, which still shows up on some of the commercial-style driveway gates off the busier roads. We stock brand-specific parts locally so a DoorKing control board or a Viking gear set doesn’t leave your gate stuck for a week while something ships from out of state. If you’ve got a brand we don’t recognize, call us anyway; odds are good Hal has worked on it or knows exactly who made it under a private label.
Common Gate Motor & Opener Problems We See in Rendon Homes
These are the calls we get most often from the 76140 ZIP. Read through and see if any sound familiar.
- Gears stripped by shifting posts. Rendon’s expansive clay soils heave gate posts seasonally, and a post that moves even an inch or two throws the operator’s geometry off enough to chew through nylon drive gears. We fix the post problem, not just the gear, so the repair holds.
- Slide gate jammed halfway. On gravel driveways, dust and small stones work into the track rollers, and a spring thunderstorm with high wind can bow a cantilever track just enough to bind the gate. The motor keeps trying until it trips a breaker or burns out. We rebuild the track and replace the motor if it’s cooked.
- Old 1980s and 1990s operators with dead control boards. Many of the original ranch gates in Rendon were installed before safety reversing edges and photo eyes were standard. The boards are obsolete now, and sourcing replacements gets harder every year. We’ll tell you honestly when a retrofit makes sense and when replacement is cheaper.
- Latch and strike misalignment. After a wet winter, older gate posts on Rendon Road and the surrounding rural routes twist or tilt so the latch no longer meets the strike. That makes the motor strain against a gate it can’t fully close, which kills the limit switches and eventually the motor itself. We reset the post in deep piers and realign the latch so everything stops fighting.
Pricing for Gate Motor & Opener in Rendon, TX
Here’s what Rendon homeowners can expect to pay. These are real ranges, not teaser numbers.
- Service call and diagnosis: $75 to $125, and there’s no trip charge inside the county.
- Motor repair: $275 to $750, including most parts. We quote the exact number before we touch anything.
- New motor installation: $450 to $1,900, depending on operator type, gate weight, and whether we need to reset posts or rebuild track.
- Slide motor replacement with track realignment: $800 to $1,900.
- Post footing reset and re-weld: $600 to $1,400, often the real fix when the motor keeps failing.
Every price is quoted and agreed before any work starts. You won’t get a surprise invoice. We also stand behind every job with a $40 discount on any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a straight answer over the phone.
We Also Serve Cities Near Rendon
If you’re outside the immediate 76140 area, we still cover the surrounding communities. We handle gate motor and opener work in Everman, Kennedale, Forest Hill, and Burleson. Whether it’s a slide gate on a Burleson acreage or an automated driveway gate in a newer Kennedale subdivision, the same crew and the same 90-Day Done Right Promise apply. Call (877) 610-2993 and tell us where you are.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Rendon
The most common cause is the expansive clay soil under your gate posts. Rendon sits on Vertisol clay that swells with spring rain and shrinks in summer drought, shifting posts enough to throw the operator out of alignment. Once the geometry’s off, the gears eat themselves. The permanent fix is resetting the post in deep piers, not just replacing the gear. Call (877) 610-2993 and we’ll check the post before we sell you a gear set.
Sometimes yes, if the motor itself is still sound and the control board is still available. But many 1980s and early 1990s operators in Rendon have obsolete boards that can’t be sourced new anymore, and retrofitting modern safety features onto them often costs more than a new operator. We’ll give you an honest assessment: if the old unit can be repaired safely for less than 60% of replacement cost, we’ll repair it. Otherwise we’ll show you the numbers and let you decide. Estimates are free.
Spring in Rendon means wet clay, standing water, and wind. The track rollers accumulate grit, the ground under the track softens, and a bowed or settling track makes the gate bind halfway through its travel. The motor’s overload sensor stops it rather than burn out. We clean and realign the track, replace seized rollers, and check the track supports for wind damage. Call (877) 610-2993 for an exact quote.
Check your photo eyes first. A lightning strike or power surge during a Rendon thunderstorm often knocks out the photo eye sensors or trips the GFCI outlet the operator is plugged into, and many gates won’t close without a functional safety signal. If the eyes are aligned and powered and the gate still won’t move, it’s likely a fried control board or a blown capacitor, both of which we stock for common brands. Call us and we’ll walk you through the quick checks over the phone.
If your gate is your only way in and out, yes. Rendon’s unincorporated roads can wait hours for utility restoration after a severe storm, and a dead gate means you’re either stuck inside or climbing out to open a heavy ranch gate by hand. A battery backup keeps the operator working through outages, and it also conditions power to reduce surge damage to the control board. Installed backup batteries typically run $250 to $500 depending on the operator. Call (877) 610-2993 and we’ll tell you what fits your unit.
Understanding Rendon’s Unique Gate Motor Challenges
If you’ve lived in Rendon long enough, you’ve watched a fence post lean. The 76140 ZIP sits on some of the most expansive clay in southern Tarrant County, and it doesn’t move in the neat, predictable way people expect. It heaves, twists, and settles from one season to the next, and your gate is bolted to the parts of the ground that move the most. A swing gate post that tilts three degrees in June might strip an operator’s drive gear by September. A slide gate track that looked straight in March can bind in April after the first big rain softens the subgrade.
This is the real reason Rendon gate motors fail differently than they do ten miles north in Fort Worth or twenty miles south in Johnson County. The soils and the weather patterns here produce a specific failure cycle, and a company that doesn’t know the local clay will keep replacing the same motor every few years without ever fixing the post underneath it. That’s not a repair. That’s a subscription.
We serviced a slide gate operator on Rendon Road where the original 1990s concrete post footings were poured shallow, and after a wet spring the gate post tilted enough to strip the rack and pinion gears on a DoorKing operator. Our crew reset the post footing with deep piers, re-welded the rack, and installed a new loop detector to prevent the gate from closing on horse trailers that cross the driveway daily. That job wasn’t just a motor swap. It was understanding why the motor died, and fixing the thing that killed it.
The older acreage properties around Rendon were built for semi-rural living: heavy pipe-welded gates, hand-set posts, and operators added years later without much thought to footing depth. The newer subdivisions off the southern growth corridor have aluminum gates on production-builder hardware that was never meant to survive a decade of Texas sun and clay movement. We work on both every week, sometimes on the same street. That dual reality, old ranch hardware next to brand-new automation, is Rendon’s specific challenge. It’s also ours to fix.
What We Check Beyond the Motor
A gate motor in Rendon rarely fails in isolation. There’s almost always something upstream: a post that moved, a hinge that wore out, a track that settled, a wire run that got chewed by rodents in the conduit. We don’t just bolt on a new motor and leave. We check the whole assembly, because that’s what the 90-Day Done Right Promise actually requires. If we miss the bent hinge bracket, the new motor strains on day one and we’re back on day forty-five fixing our own work. That doesn’t happen often, because we check first.
The other thing we look at is how the gate will behave when the power goes out. Rendon gets real thunderstorms, not just sprinkles, and a gate that can’t be operated manually during an outage turns a convenience into a fence with no opening. We’ll verify your manual release works and show you how to use it if you’ve never had to. If a battery backup makes sense, we’ll quote it. No pressure, just information.
Call Gatewood Fence & Gate for Gate Motor & Opener in Rendon
Your gate is broken, the motor’s humming or not humming, and you want somebody who’ll show up, do the job right, and stand behind it. That’s exactly what we do. Call (877) 610-2993 for a free estimate. A live person answers, day or night, and we’ll tell you what the repair or replacement will cost before any work begins. No call centers, no runaround, no surprise invoice. Just Hal’s crew, the 90-Day Done Right Promise in writing, and the kind of work that doesn’t need to be redone.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rendon and the surrounding Tarrant County communities since 2001.