Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Rendon
Gate parts and welding in Rendon usually break down to one of three things: a hinge post that has shifted in the clay, a slide gate that binds after a storm, or an older operator whose control board finally gave out. We handle all three, and we fix them in your driveway, on site, without hauling your gate off to some shop across the metroplex. Hal Gatewood has been doing this work since 2001, and the crew that shows up on Rendon Road or north of the rail line knows the difference between a 1980s pipe-welded ranch gate and a builder-grade aluminum gate on a new subdivision lot. Call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Rendon’s Preferred Gate Parts & Welding Company
Rendon is a specific kind of place. It sits in an unincorporated pocket of southern Tarrant County, which means no city inspection department chasing every code change, and also no one forcing older gates to meet modern safety standards. A lot of what we see on acreage properties around Rendon was hung forty years ago and has been patched and re-patched ever since. We do not walk up to a crooked gate and start talking about a full replacement. We look at the hinge post, the rail, the roller, and ask what actually failed. That repair-first approach is why Rendon homeowners keep our number in their phones.
Every job we finish in Rendon carries the 90-Day Done Right Promise in writing. If something is not right, one call brings us back. No runaround. Hal Gatewood’s name is on the shop, his address is published, and his cell number gets handed out like it is not a secret. No trip charge inside the county. Free second opinion on any written estimate. And for seniors and veterans, a permanent 10% discount. The person who quotes the job is usually the person who does the job.
We have answered calls from Rendon at two in the morning when a gate would not close and the horses were out. We have also answered calls at noon when a new subdivision homeowner just needed a hinge tightened. Both get the same live person on the line, not a voicemail, not a queue.
Our Gate Parts & Welding Services in Rendon
Our Gate Parts & Welding team covers the full range for Rendon’s mixed housing stock. Here is what we do most often.
Hinge Replacement
On older Rendon acreage gates, hinges are usually welded barrel-style to a pipe post and a heavy tubular steel frame. When they wear, the gate drops half an inch and the latch stops meeting the strike. We cut the old hinge off, weld a new one on, and re-align the gate so it swings true. On newer aluminum gates, we replace bolt-on hinges and square the frame while we are at it.
Post Replacement
This is the big one around Rendon. Hand-set posts from the 1970s and 1980s were often dropped into a hole with maybe two feet of concrete, if that, and the expansive Vertisol clay beneath has been heaving and shrinking them for decades. A post that has twisted four inches out of plumb will never hold a gate straight, no matter how many shims you add. We set new posts in a deep concrete footing below the clay heave zone, plumb and square, and build the mount fresh. It is the difference between fixing a gate once and fixing it every season.
Rail Repair
Slide gates on rural Rendon parcels take a beating from spring winds. A bent cantilever rail binds the rack and pinion and derails rollers, and the gate sits stuck halfway open. We straighten rails where possible, weld cracked sections, and replace rail sections that have fatigued beyond repair. Then we set the roller trucks and adjust the rack so the gate cycles without grinding.
Custom Welding
When a hinge mount tears loose from a pipe frame, or a decorative finial snaps off a tubular steel gate, or someone backs a trailer into the corner of a gate and folds it, we weld on site. MIG and stick welding, done in the driveway, with the gate still hung where it belongs. Custom brackets, replacement pickets, rack mounts for operators, whatever the gate needs to go back to work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We carry parts for DoorKing, Linear, and Viking operators on the truck, along with universal hinge sets, roller trucks, and rack sections that match older ranch gate hardware. If your operator still runs a control board from the 1990s but the board has died, we will tell you straight whether a retrofit board exists or whether the smarter money goes toward a newer operator that actually meets current safety standards. We work on older LiftMaster and FAAC units around Rendon regularly, and we keep common boards and limit switches in local stock so we are not waiting on a freight shipment when your gate is stuck.
Common Gate Parts & Welding Problems We See in Rendon Homes
- Hinge posts tilting in expansive clay. After a wet spring followed by DFW’s dry summer, the black gumbo soil under Rendon shifts enough to pull a hand-set post out of line. The latch misses the strike, the gate sags on the free end, and a DoorKing or Viking operator starts straining against misalignment and strips its gears.
- Slide gate tracks bent by spring storms. Exposed rural parcels along roads like Rendon Road take the full force of severe weather. A cantilever track that takes a direct hit from a wind-thrown branch or a straight-line gust will derail the gate and bind the rack and pinion.
- Obsolete control boards failing on legacy operators. We regularly see aging boards in older ranch gates that simply quit after a power surge or years of heat. The gate freezes, and the homeowner is out there with a manual release wondering what happened. Sometimes the board is replaceable; sometimes retirement is the honest call.
- Worn barrel hinges and sagging panels on 1980s gates. Heavy pipe-welded gates hung for forty years eventually wear their hinge pins oval and sag until they drag on the ground. A 1980s swing gate can almost always be repaired with new hinges, a straightened rail, and a squared frame, no replacement needed.
Pricing for Gate Parts & Welding in Rendon, TX
We quote every job before work starts, and the price does not change at the door. For hinge replacement on a standard swing gate in Rendon, expect $180 to $340 including parts and labor. Post replacement runs $350 to $850 depending on post size, depth, and how much concrete we have to remove to get the old one out. Rail repair on a cantilever slide gate typically falls between $220 and $600, and custom welding jobs start around $95 minimum. Production-built subdivision gates on newer Rendon lots are usually quicker and cheaper to repair than old ranch gates with hand-set posts and decades of prior patches. Call (877) 610-2993 and we will quote your gate over the phone after a few questions, or schedule a free on-site measure and give you a written price.
We Also Serve Cities Near Rendon
Our crews cover Rendon and the surrounding communities, including Everman, Kennedale, Forest Hill, and Burleson. If you live just over the line in any of those towns, the same live-answer phone line and the same 90-Day Done Right Promise apply. Call and a local crew will come out with the truck already stocked for gate work.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Rendon
The Vertisol clay under Rendon expands and contracts dramatically with seasonal moisture, and older acreage posts were often hand-set without deep footings or engineered reinforcement. Suburban Fort Worth gates typically have newer footings built to code, but a 40-year-old pipe post sunk two feet into raw clay will heave and twist every year. If your post shifts more than an inch or so, the fix is a new post set below the heave zone, not more shims on the gate. Call (877) 610-2993 to have us take a look.
In most cases it can be repaired. A sagging gate usually means worn hinges or a post that has moved, not a gate that has failed. We replace the hinges, re-plumb or replace the post, and square the frame, and the gate goes back to swinging clean. We only recommend replacement when the steel itself is rusted through or a previous repair has been welded over so many times it is no longer structurally sound. Call (877) 610-2993 for an honest assessment.
Older operators from the 1990s often lack modern safety features like obstruction detection and auto-reverse, and some replacement boards are no longer manufactured. If your operator works and we can source safety retrofits like photo eyes and edge sensors, we will retrofit it and keep it running. If the board is dead and no safe retrofit is available, we will tell you that replacement is the responsible call. We do not leave an unsafe gate in service. Call (877) 610-2993 and we will check your unit.
High wind or a flying branch usually bends the cantilever track, which throws the rack out of line with the pinion gear, and the gate binds or jumps. Sometimes the track can be straightened in place; sometimes the bent section needs cutting out and welding new material in. We check the roller trucks and the full track line before adjusting the rack, because straightening only the rack without fixing the track will just bind again. Call (877) 610-2993 to schedule a repair.
Yes, and this is the hardest part of working in Rendon. The same street can have a working ranch gate with a pipe frame and a DoorKing operator on one lot, and a newly built subdivision gate with an aluminum ornamental panel and a Linear opener on the next. We carry parts for both, and Hal has been welding and servicing both styles since long before the subdivisions arrived. If you have an older gate next to newer neighbors, we are the crew for it. Call (877) 610-2993.
The Rendon Reality: Old Ranch Gates Next to New Subdivisions
Rendon sits in an unincorporated pocket of southern Tarrant County where older acreage homesteads and horse properties, many with long gravel driveways and heavy swing or slide ranch gates, now sit directly alongside newly platted suburban subdivisions with automated driveway gates. A lot of gate companies in DFW know one world or the other. They know the modern operator side, or they know the old farm gate side. Rendon demands both. We regularly fix a Viking operator on a builder-grade aluminum gate in the morning and then weld a broken hinge on a pipe gate off Rendon Road that afternoon.
We replaced a twisted hinge post on a heavy pipe-welded swing gate off Rendon Road after a wet winter had shifted the post several inches out of alignment, leaving the DoorKing operator straining and the latch missing the strike. Our crew set a new post with a deep concrete footing below the clay heave zone, rebuilt the hinge mount, and adjusted the rack and pinion so the gate cycled smoothly again without stripping the operator. That kind of repair, on a gate that had been there longer than most of the subdivisions, is exactly the work this area needs.
Call for Gate Parts & Welding in Rendon
If your gate is sagging, grinding, or stuck in one spot, call (877) 610-2993. A live person answers, 24 hours a day. We will give you an honest take over the phone and a written price before any work begins. No trip charge inside the county. $40 off any repair over $200. And a 10% discount for seniors and veterans, every time. When the gate fails, you want a name you can verify and a face you will see at the hardware store. That is us.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rendon since 2001.