Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pembroke Park
Gate repair in Pembroke Park usually means one of two things: a community entrance gate for a mobile home park that has to work every single day, or a commercial slide gate along US-1 that has been eaten alive by salt air. We fix both. A typical gate opener repair in Pembroke Park runs $180-$380 for a new control board or limit switch, while a full operator swap with labor lands between $1,200 and $2,400 depending on the brand. Hal Gatewood has been repairing gates since 2001, and a live person answers at (877) 610-2993 any hour you call.
Why Gatewood Fence & Gate Is Pembroke Park’s Preferred Gate Repair Company
We’re not a franchise with a truck that shows up from three counties away. Hal’s name is on the shop and on every invoice. When a park manager off Southwest 48th Avenue needs a Linear operator rebuilt instead of replaced, Hal is the one who answers the phone and often the one who shows up with the rebuilt board on the truck. That’s the kind of thing that matters when your one entrance gate is down and 200 residents are waiting to get home.
Pembroke Park residents have learned the hard way that a national outfit will quote a number on the phone and send a different number to the door. We don’t work that way. Every job gets a written price before any work starts. You agree to it, we shake on it, and that’s the number on the invoice. If it’s not done right, the 90-Day Done Right Promise is in writing on the job sheet. One call brings Hal back. No runaround.
We also answer the phone around the clock. Not a voicemail. Not a call center in another state. A live person. When a community gate fails at 6:30 on a Friday evening and the line of cars backs up to Hallandale Beach Boulevard, you don’t need a recording. You need a person who knows what a burnt contactor looks like and can tell you whether it’s worth fixing tonight or whether we’re bringing a temporary opener in the morning.
Our Gate Repair Services in Pembroke Park
Here’s what we actually do in Pembroke Park, week in and week out. For a broader look, our Gate Repair service hub covers the full scope of what we handle across South Florida.
Electric Gate Repair
Most electric gate failures in Pembroke Park are not the motor. They’re the control board, the contactor, the loop detector, or a limit switch that gave out after decades of daily cycles. We diagnose the actual failed component and replace just that part when it’s still available. When it’s a discontinued Linear or Eagle board from the 1980s, we often have a rebuilt unit on the truck or can source one in a day or two. We don’t upsell a full operator because the park’s HOA budget can’t take a $3,000 hit over a $180 relay.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle. That’s where we start. On the steel swing gates at Pembroke Park’s older mobile home communities, decades of salt-laden air and daily high-cycle use have shifted post footings and worn hinge pins down to nubs. We cut out the old post, set a new one at the correct depth with proper concrete, and re-hang the gate so it swings square and closes true. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
When a slide gate chatters, binds, or stalls halfway across the opening, the problem is usually a worn rack and pinion gear, a jumped chain, or a gate frame that’s no longer plumb. We pulled a Linear slide gate operator from a 1970s-era mobile home park off Southwest 48th Avenue near Hallandale Beach Boulevard not long ago. The control board had a burned relay and the rack and pinion gear was worn so badly the gate chattered then stalled. Our tech had a rebuilt Linear board on the truck, swapped the drive gear, and re-tuned the loop detector so the gate no longer false-triggers on passing trucks. The park manager got another five years out of an operator most companies would have written off as obsolete.
Gate Lock Repair
Most manual gate locks and maglocks on older Pembroke Park gates fail because water gets into the housing and rusts the solenoid. We replace lock bodies, replate strike plates, and re-wire maglock circuits so the gate actually stays secured. For community entrance gates, a working lock is the first line of security for the whole park. It deserves to work every time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
We’re certified on nine major gate brands, but around Pembroke Park the names that come up most are Linear, FAAC, and BFT. Those are the operators installed in the 1970s, 1980s, and 1990s when the mobile home parks went up and the warehouse gates went in along Federal Highway. We stock rebuilt boards, drive gears, and limit switches for these legacy units so we’re not waiting on a distributor to ship a part from Georgia while a whole park sits open at night. We service what we know, and we know what’s still running in Pembroke Park.
Common Gate Repair Problems We See in Pembroke Park Homes
- Burnt contactors and dead control boards in legacy Linear and Eagle operators. These units were installed when the parks were built in the 60s through 80s. The boards are discontinued, but a qualified repair tech can rebuild them. We do it regularly.
- Hinge post rot and sag on steel swing gates. Salt air from the ocean, which sits only 2 to 3 miles east of Pembroke Park, accelerates corrosion on post footings. A gate that drags or binds is usually a post problem, not a panel problem.
- Loop detector falsing and photocell misalignment after tropical storms. Water gets into conduit and junction boxes along US-1, causing ghost openings and entrapment faults. We dry out the boxes, re-seal the conduit, and re-aim the photo-eyes.
- Worn rack gears and jumped chains on slide gates. High cycle counts at park entrances wear drive gears faster than anywhere else. When the gate chatters, that’s the gear telling you it’s done. We replace the gear before it strips the rack.
Pricing for Gate Repair in Pembroke Park, FL
Here’s what you can expect to pay for common fixes in Pembroke Park. A typical electric gate repair, like a control board or relay replacement, runs $180-$380 including the part and the labor. Hinge and post repair on a swing gate runs $350-$850 depending on post size and whether we’re resetting it in concrete. Gate realignment and rack gear replacement lands between $250 and $600. A full operator swap for a community entrance gate runs $1,200-$2,400 for a new FAAC or BFT unit with installation.
The price is quoted and agreed before any work starts. We never hand you an invoice bigger than the number we discussed. Every repair over $200 carries $40 off, there’s no trip charge inside the county, and we’ll give you a free second opinion on any written estimate you’ve gotten from another company. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Pembroke Park
Gatewood Fence & Gate covers Pembroke Park and the surrounding South Broward and North Miami-Dade corridor, including Hallandale Beach, Aventura, North Miami Beach, and Ojus. If you’re just over the town line and dealing with a community gate that won’t close, you’re still in our service area. See Gate Repair in Pembroke Park for local details, or call and tell us where you are. We’ll be straight about whether we can get there today.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pembroke Park
Yes, we repair legacy Linear and Eagle operators regularly, including the units installed when Pembroke Park’s mobile home communities were built in the 60s through 80s. The control boards are discontinued, but we stock rebuilt boards and drive gears for these models. In most cases we can keep your existing operator running for years for a fraction of the cost of a new FAAC or BFT unit. If replacement genuinely makes more sense, we’ll tell you that plainly and give you a written number. Call (877) 610-2993 and describe what the gate is doing. Hal can usually tell you over the phone whether it’s repairable.
False triggering on a park entrance gate almost always comes down to the loop detector or the photo-eyes. In Pembroke Park, the salt air and tropical storm season make it worse because water seeps into the conduit and junction boxes along the gate track. That moisture causes the loop detector to read phantom vehicles, which is why the gate opens for nothing. We dry out the boxes, replace corroded detector boards, and re-seal the conduit so the problem stays fixed. If the gate is ghost-opening, get it looked at soon. An unattended false-open is a security hole. Call (877) 610-2993 and we’ll schedule a call.
Salt-laden air accelerates oxidation on steel and even aluminum gate hardware noticeably compared to inland Broward cities. We see hinge pins worn down to nubs, post footings corroded below grade, and operator housings with rust blooming through the paint on gates that are only 15 to 20 years old. This is not a cosmetic issue. Corroded hinge posts shift, the gate sags, and it binds or drags against the drive. We cut out the failed post and set a new one with proper concrete, using galvanized or stainless hardware so the next two decades are less brutal. If your gate is starting to drag in Pembroke Park, call (877) 610-2993 before the post fails completely.
If the photo-eyes are clouded or misaligned, the gate will typically refuse to close or will reverse mid-travel and reopen. UL 325 requires that the gate detect an obstruction and stop or reverse to prevent entrapment, so the system is doing what it’s supposed to do when it sees a fault. But it’s also a sign the photo-eyes need cleaning, re-aiming, or replacement. We re-align and clean photo-eyes as part of most service calls, and we test the entrapment circuit before we leave. If your gate won’t close and you’re not sure whether it’s the photo-eyes or the loop detector, call (877) 610-2993 for a straight diagnosis.
Yes, we offer maintenance contracts for commercial slide gates along US-1 and the warehouse district in Pembroke Park. These gates see heavy truck traffic and salt exposure, so we recommend quarterly inspections to catch worn drive gears, corroded rollers, and water intrusion before they become failures. A maintenance contract includes priority response when something does go down. We tailor the schedule to the gate’s cycle count and age, not a one-size-fits-all checklist. Call (877) 610-2993 and ask for a walkthrough. Hal will walk the gate with you and give you a written maintenance plan.
Call Gatewood Fence & Gate for Gate Repair in Pembroke Park
If your gate is down, sagging, false-triggering, or just making a noise it didn’t make last month, call us. A live person answers at (877) 610-2993 any time, day or night. We’ll give you a straight diagnosis, a written price before any work starts, and a repair that’s covered by the 90-Day Done Right Promise in writing. Hal’s name is on the shop, and he’s been fixing gates since 2001. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pembroke Park and South Florida since 2001.