Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Pembroke Park
Gate motor and opener repair in Pembroke Park runs $165-$520 for most jobs, and the majority are done same day. If your community entrance gate is stuck, grinding, or ignoring the remote, call (877) 610-2993. Hal Gatewood has been fixing gate motors since 2001, and his crew knows Pembroke Park’s mobile home parks and warehouse districts better than any out-of-town outfit ever will. We answer the phone live, 24/7, and we show up when we say we will.
Here’s the thing about Pembroke Park most gate companies miss: this town runs on single-entrance communities. Mobile home parks built in the 1960s through 1980s, each with one gate doing the work of ten. When that gate motor dies, hundreds of residents are affected. We treat every entrance gate in Pembroke Park like the critical infrastructure it is. No runaround, no “we’ll get there next week.” Call (877) 610-2993 and a live person picks up.
Why Gatewood Fence & Gate Is Pembroke Park’s Preferred Gate Motor & Opener Company
We’re a locally owned, owner-operated shop with a published address and license number anyone can look up. Hal’s name is on the building. Hal’s name is on every invoice. He’s been at this since 2001, and he’s not passing through. When you call about a gate motor problem in Pembroke Park, you’re calling a person who has probably driven past your community fifty times.
Pembroke Park customers call us for one reason more than any other: we repair what other companies want to replace. That matters in this town specifically. A 1980s Linear gate operator at a mobile home park entrance isn’t something you rip out casually. A lot of companies won’t even touch it. They’ll quote you $4,000 for a full replacement and act like the old unit is scrap metal. But an original Linear board can often be reprogrammed, reconditioned, and put back into service for a fraction of that. We stock legacy parts. We know how to read the old wiring diagrams. We carry the compatible loop detectors and keypads that work with those systems.
There’s also the 90-Day Done Right Promise, stamped in writing on every job. If it’s not done right, Hal comes back and makes it right. No hedge language, no fine print, no phone tree. One call brings him back.
Our Gate Motor & Opener Services in Pembroke Park
Motor Repair
This is our bread and butter in Pembroke Park. Most motor repair calls here involve either salt-air corrosion or worn gears from constant cycling. We diagnose on site, replace only what’s failed, and test the full cycle count before we leave. If the motor can be rebuilt, we rebuild it. If a control board is fried, we source the right replacement or repair the original where possible. You get a straight answer about what’s wrong and what it costs to fix before any work starts.
Motor Installation
When a motor is truly beyond saving, we install new operators with an eye toward longevity in Pembroke Park’s coastal air. We recommend units with sealed housings, galvanized mounting hardware, and surge protection that can handle Florida’s afternoon lightning. Installation includes mounting plate fabrication if the old plate is rusted, proper alignment, limit setting, safety edge wiring, and a full demonstration. We coordinate with your HOA board or property manager on schedule and cost transparency before lifting a tool.
Linear Motor Service
Linear gate operators are everywhere in Pembroke Park. The town’s mobile home communities, especially those built out in the 1970s and 1980s, originally installed Linear swing and slide operators that are still running today. We service Linear APeX swing operators, Linear slide gate motors, and the discontinued Linear series boards that many supply houses no longer carry. We stock resurrected and reconditioned control boards, plus compatible linear arm assemblies and gearboxes. This is one of the few shops in South Florida that genuinely enjoys working on these old units.
Slide Motor Service
Along US-1 and Federal Highway, Pembroke Park’s warehouses and light-industrial properties rely on heavy slide gates to protect loading docks and storage yards. Those gates take a beating. Salt air pits the track. Hurricane debris bends the rack. The motor’s gearbox grinds itself down over thousands of open-close cycles. We handle slide motor replacement, rack alignment, end-limit repair, and loop detector replacement for commercial and residential slide gates throughout Pembroke Park. We also rebuild slide gates that have come off their tracks due to storm damage or impact.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
Our Gate Motor & Opener team is certified to service nine major brands, and we keep parts on the truck for the ones Pembroke Park actually uses: FAAC swing and slide operators, BFT motors common on newer HOA installs, and Viking units found on heavier commercial gates. We also service Linear extensively, which matters more in Pembroke Park than almost anywhere else in Broward. Walk into any one of the older mobile home parks off Pembroke Road or Lake Shore Drive, and there’s a decent chance the entrance gate is running a Linear operator that was installed before the internet existed. We keep those legacy parts in stock or can source them within a day.
Common Gate Motor & Opener Problems We See in Pembroke Park Homes
- Salt-air rust on hinge posts and roller tracks. Pembroke Park sits two to three miles from the Atlantic, and that salt-laden air gets into everything metal. Swing gates sag and bind at the post because the post itself has rotted from the inside. Fix the panel without the post and you’ll fix it twice.
- Fried control boards after hurricane-season power surges. A lightning strike a block away can send a spike through the power feed and kill an original Linear or Eagle board instantly. Whole park entrances get stuck open or closed. We replace boards, add surge protection, and reprogram access codes the same visit.
- Worn rack and pinion drives at high-cycle entrances. Single-entrance mobile home parks mean one gate doing the cycling of twenty residential gates. The rack teeth wear down, the pinion gear starts slipping, and the gate jerks halfway then stops. We replace racks, re-shim drives, and reset limits so the gate runs smooth again.
- Intermittent loop detector failures. A gate that opens fine for you but not for the next car usually has a failing loop detector or a cracked saw cut. In parking lots with constant heavy traffic, the loop wires break down. We trace, splice, or replace the loop and get the gate sensing cars properly again.
Pricing for Gate Motor & Opener in Pembroke Park, FL
Motor repair in Pembroke Park typically runs $165-$320 for diagnosis plus repair, depending on parts. A control board replacement or rebuild lands between $280-$520. New motor installation starts around $900 for a residential swing operator and runs up to $2,800 for a heavy commercial slide motor with safety edges and loop detectors. Linear motor service on a legacy community gate usually falls in the $240-$450 range when the board can be salvaged. Salt-air corrosion repairs, like replacing a rusted hinge post footing, add $300-$700 depending on the post size and concrete work. The quote is agreed before any work starts. No trip charge inside the county. $40 off any repair over $200. A free second opinion on any written estimate. And a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Pembroke Park
Based out of our Miami office, our crew runs calls to Hallandale Beach, Aventura, North Miami Beach, and Ojus regularly. If your community is just over the line from Pembroke Park, we can still get to you. Call (877) 610-2993 and ask.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Pembroke Park
No, not necessarily. In Pembroke Park, we repair far more original Linear operators than we replace. The failure is often the receiver board, a blown capacitor, or a failed limit switch rather than the motor itself. Hal stocks reconditioned Linear boards and can reprogram them to work with your existing remotes and keypad. A full replacement only makes sense when the motor windings are burned out or the gearbox has seized. Call (877) 610-2993 and we’ll diagnose it on site.
Almost never. In Pembroke Park, a sagging swing gate at a mobile home community entrance is usually a rusted hinge post that’s lost its footing. The post rots from the inside due to salt air, the gate drops, and the motor strains against the misalignment until it overheats or strips a gear. We replace the post footing, correct the frame alignment, and reprogram the original operator to match the new geometry. Fix the panel without the post and you’ll fix it twice.
We handle this constantly in Pembroke Park. Our crew coordinates directly with your HOA manager or board president on scheduling, so we’re on site during a planned window, not surprising residents at rush hour. We can do the bulk of motor repair without fully blocking the entrance, and for anything that does require the gate to be down, we stage the work to keep one lane moving where possible. We provide written quotes and photos for board review before the work begins.
Yes. This is standard practice for us. We wire the existing keypad and access card reader into the new motor’s control board and migrate the current codes over. Residents don’t need new codes or new remotes. For older Linear-based systems in Pembroke Park’s mobile home communities, we re-use the existing receiver where possible, which preserves all current programming. We test every code on site before we call the job done.
Same day in most cases. We know post-storm gate failures are a security emergency, not a convenience call. A dead board leaves your whole community entrance either locked open with no control or locked shut with no way in. Call (877) 610-2993, talk to a live person, and we’ll get a truck to Pembroke Park as fast as the roads allow. We carry replacement boards and surge protectors on the truck, so the fix is usually one visit.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pembroke Park with gate motor and opener repair from our Miami office.