Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pembroke Park
If you’re looking for gate parts and welding in Pembroke Park, the work usually falls into two buckets: a hinge or post that’s failed on an older swing gate, or a slide gate that’s jumped its track along the Federal Highway corridor. We fix both, and we do it in your driveway rather than hauling the gate back to a shop. Most repairs we quote in Pembroke Park run between $180 and $640 depending on whether we’re replacing rollers, welding a cracked frame, or setting a new hinge post. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Pembroke Park’s Preferred Gate Parts & Welding Company
Our Gate Parts & Welding crew has been crawling under the swing arms and slide tracks of Pembroke Park’s mobile home communities long enough to know that the gate at the front of the park is not a convenience. It’s the single security checkpoint for dozens of families, and when it’s down, the whole park feels it. So we answer the phone like it matters, because to the park manager calling at 6:15 in the morning, it does.
Hal Gatewood’s name is on the shop and on every invoice we hand you. We’ve been locally owned and owner-operated since 2001, and if a weld fails or a hinge we hung starts to sag inside 90 days, the 90-Day Done Right Promise means one call brings us back. No fine print, no runaround. We publish our address and license number because we want you to know exactly who you’re dealing with before you let us near your gate.
Pembroke Park’s older gates are not like the ones in newly built HOAs farther west. They’re legacy equipment, much of it installed decades ago, and a lot of national companies won’t touch them because there’s no part number in their system. We stock and fabricate for those gates specifically. That’s why park managers off SW 31st Avenue and the warehouse owners off US-1 keep our number saved.
Our Gate Parts & Welding Services in Pembroke Park
Hinge Replacement
Hinges on Pembroke Park’s older swing gates carry more weight than most people realize, especially on the wide entrance gates to manufactured housing communities. Salt air from the Atlantic, just a few miles east, accelerates rust on the hinge pins and the barrel itself. We cut out the old hinge, weld in a new barrel and pin assembly, and set it so the gate swings level. If the hinge post has shifted, we address that too, because a new hinge on a leaning post just means you’ll call us again after the next storm.
Post Replacement
The steel posts holding up gate panels in Pembroke Park have spent decades in sandy, salty soil, and the failure usually shows up at the base, right where the post enters the footing. We dig out the old post, pour a new footing, set the post in correct alignment, and weld the gate back to it. This is not a quick patch job. It’s the repair that actually lasts, and it’s the difference between a gate that works and a gate that sags again before the dry season ends.
Rail Repair
Slide gates along the Federal Highway industrial corridor run on ground rails that take a beating from truck traffic, rust, and debris. When a rail section cracks or a roller mount tears loose, the gate will bind or jump the track entirely. We weld the rail back to true, replace broken sections, and re-set rollers so the gate tracks clean. For warehouse owners who can’t have a loading bay open all night, we make this a priority because an unsecured gate is an open invitation.
Custom Welding
Not every gate failure has a replacement part waiting on a shelf. When an old Linear operator’s mounting plate cracks or a gate frame needs a reinforced bracket that doesn’t exist in any catalog, we fabricate it on site. Our welders carry portable MIG and TIG rigs to Pembroke Park, so the gate stays in your driveway and the work gets done in one visit. Custom welding also means we can modify existing gates to accept modern safety edges and photocells without swapping the whole assembly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Park
We service Gates from Viking, Ghost Controls, and DoorKing, among others, and we keep a working stock of rollers, hinges, brackets, boards, and safety accessories in our South Florida shop so Pembroke Park jobs don’t wait on a ground shipment from California. But the brands we really know in this ZIP code are the ones the manufacturers stopped supporting years ago: Linear, Eagle, and early Viking models from the 1980s and 90s. If your gate has a nameplate that predates the internet, call us. We’re comfortable with it.
Common Gate Parts & Welding Problems We See in Pembroke Park Homes
- Hinge posts rotted at the base from salt air and wet season downpours. The gate will slowly lean until it drags on the ground or binds at the latch. We catch it by checking the post before we touch the hinges, because fixing the panel without the post means fixing it twice.
- Slide gate rollers disintegrating from rust on Federal Highway corridor properties. When the roller bearing seizes, the gate grinds sideways and eventually welds itself to the rail. Replacing the roller early is far cheaper than cutting the gate free later.
- Legacy Linear and Eagle operator boards that fail after a thunderstorm surge. The originals are discontinued, so we either repair the board or wire in a retrofit controller that matches the existing harness. Most park managers prefer the repair, and we agree.
- Broken welds on high-cycle entrance gates at mobile home parks. When an entrance gate cycles hundreds of times a day, a weld that was always marginal will crack mid-travel. We re-weld, reinforce, and if the part has failed once, we build it heavier so it won’t fail the same way again.
Pricing for Gate Parts & Welding in Pembroke Park, FL
Here’s the honest math for Pembroke Park. A simple hinge replacement runs $180 to $340, including the new hinge and the weld labor. Post replacement, which means digging out the old post, pouring a new footing, and re-hanging the gate, runs $420 to $780 depending on the depth of the footing and the size of the gate. Rail repair on a slide gate runs $260 to $520, and custom welding work is quoted by the hour at $95 to $135 plus materials. We quote the price before any work starts, in writing, and it doesn’t change at the door. You’ll also get $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 for a free estimate.
Our Gate Parts & Welding Services in Pembroke Park, FL
Here’s what we see in the field across Gate Parts & Welding in Pembroke Park, especially near the mobile home communities off SW 31st Avenue and along US-1. A park off SW 31st Avenue called us because their 1980s Linear swing gate had sagged so badly the safety photocell would fault every morning. Our tech cut out the rusted hinge post, poured a new post footing to correct the sag, and welded a reinforced plate for the old rack and pinion drive, then reprogrammed the loop detector so the gate closes fully without binding. That’s the kind of repair you can’t get from a catalog. That’s what we do.
Older gates in Pembroke Park, especially the ones hung in the 1960s through 1980s, also need retrofit work to meet current safety requirements, specifically photo eyes, safety edges, and auto-reverse. We can add those features to an existing gate without scrapping the original structure. In fact, that’s the better route. A well-maintained old gate with a new safety edge and a solid hinge post will often outlast a brand-new gate that wasn’t built for this climate.
We Also Serve Cities Near Pembroke Park
While most of our repair calls come from Pembroke Park and the communities along Hallandale Beach Boulevard, we regularly run welding and parts jobs in Hallandale Beach, Aventura, North Miami Beach, and Ojus. If you’re in one of those areas and your gate is down, same phone number, same live person, same 90-Day Done Right Promise.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pembroke Park
If the board still powers on and the motor turns when voltage is applied directly, the operator is almost always repairable. Most Linear failures we see in Pembroke Park are bad relays, dead capacitors, or a blown transformer, all of which we can replace with parts we keep in stock. We’ll tell you the truth on the phone: repair it if the frame and gear train are sound, replace it if the gearbox has ground itself into metal paste. Call (877) 610-2993 and describe what it’s doing, and we’ll give you a straight answer.
Yes, but only if we address the post and the footing, not just the weld. A gate that sags every year has a problem at the hinge post, and welding the gate back to a post that’s rusting through at ground level is a temporary fix at best. In Pembroke Park’s sandy soil and salt air, we typically replace the post, pour a deeper footing, and reinforce the hinge mount with a welded plate. That stops the annual sag. If the post is still solid but the weld keeps cracking, that’s a sign the gate is too heavy for the hinge configuration, and we’ll re-engineer it.
We do. We stock used and refurbished boards, transformers, relays, and limit switches for legacy Linear and Eagle models that went out of production 30 or 40 years ago. We also fabricate mounting brackets, weld-up gear racks, and roller assemblies when there is no original part left. That’s the only reason many of these old entrance gates still run at all, and we make a point of keeping that inventory current for Pembroke Park’s mobile home communities. For an exact quote on parts plus labor, call (877) 610-2993.
It could be, and it usually is. Jumping the track means either a rail section has cracked or separated, a roller bracket has torn loose from the gate frame, or the gate itself has bent just enough that the wheels lose contact. All three are welding repairs. We’ll straighten the rail, weld the broken section, re-secure the roller brackets, and set the gate back on its track the same day in most cases. If you’re on the Federal Highway corridor in Pembroke Park, we can usually be there within a few hours.
Yes, if the weld is done right and the gate still holds its alignment. A sound weld restores the gate to its original strength, and we typically reinforce the repair with a gusset or fish plate so it’s stronger than it was before. Then we test the photo eyes, safety edges, and auto-reverse to make sure the gate is not just physically strong but actually safe for daily use in a community entrance setting. If the gate is too far gone to repair safely, we’ll tell you that too, in plain English, before anyone picks up a welder.
Call Gatewood Fence & Gate for Gate Parts & Welding in Pembroke Park
We’re the local crew that fixes what other companies want to replace. If your gate is sagging, grinding, dead at the keypad, or making a noise it shouldn’t, call (877) 610-2993. You’ll get a live person, an honest answer, and a written price before any work begins. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pembroke Park, FL with on-site welding and gate parts since 2001.