Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pelham Manor
Gate repair in Pelham Manor usually comes down to one thing: salt. The village sits less than a mile from Long Island Sound, and that salt-laden air works on iron gates year-round, corroding hinges, latches, and welds far faster than inland Westchester neighborhoods ever see. If your ornamental wrought-iron gate is dragging, seized, or rusting through, we’ll come out, diagnose what’s actually failing, and fix it on site. Call (877) 610-2993 and you’ll get a live person, not a voicemail. Hal Gatewood’s name is on the shop, and he’s been fixing gates since 2001.
Why Gatewood Fence & Gate Is Pelham Manor’s Preferred Gate Repair Company
We’re a locally owned, owner-operated shop, not a national franchise that subcontracts your call to whoever’s closest. Hal Gatewood has been at this since 2001, and when you call about gate repair in Pelham Manor, you’re talking to a company whose address and license number are published for anyone to check. The person who shows up at your door will be background-checked and in uniform, and the work carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back.
Pelham Manor customers call us because we understand what this specific village does to gates. The pre-WWII estate homes here, the stone pillars, the salt air off the Sound, the freeze-thaw cycles that heave century-old posts. That’s not generic gate knowledge. That’s the stuff you learn by driving the curving streets of the Manor for years. We show up fast for our Pelham Manor neighbors, with parts for the brands homeowners actually have here, and we quote the price before any work starts. No surprises at the door.
Need a second set of eyes? We offer a free second opinion on any written estimate you’ve already received. Seniors and veterans get 10% off permanently. And if your repair runs over $200, you get $40 off. No haggling, just the standing offers we actually honor.
Our Gate Repair Services in Pelham Manor
Hinge & Post Repair
In Pelham Manor, hinge failure is the most common call we get, and it’s almost always corrosion-driven. Salt air works its way into hinge pins and the base of posts, and the iron swells, seizes, and snaps. We repair or replace hinges on site, often cutting out the rotted section of a post and using our Gate Parts & Welding in Pelham Manor to fit fresh steel. If your gate sags, it’s almost never the panel that’s failed. It’s the hinge post. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Century-old stone and brick pillars in Pelham Manor heave and tilt through coastal freeze-thaw cycles. A few degrees of movement is enough to shift the entire gate frame out of alignment, so it binds against the latch post or drags on the bluestone. We assess the pillar before adjusting the gate, because re-hanging a gate on a tilted post just means the same problem returns in six months. Sometimes the gate looks broken, but the real fix is re-plumbing or repointing the pillar first.
Weld & Rust Repair
Galvanized steel gate frames rust through at weld joints and bottom rails where salt spray collects, often hidden under paint until the gate sags or the operator starts straining. We do on-site welding, which means the gate stays in your driveway. We don’t haul it off to some shop across the county. We cut out the corroded section, weld in new steel, and treat the surrounding area so the repair doesn’t become the next failure point. On ornamental wrought-iron in Pelham Manor, stainless steel fixings and proper zinc primer are the difference between a two-year patch and a fifteen-year fix.
Electric Gate Repair
When an automatic gate in Pelham Manor stops responding, the first thing we check with our Gate Motor & Opener in Pelham Manor service is whether the motor is actually the problem. Here, salt air corrodes circuit boards and limit switches in operator housings surprisingly fast, especially on gates close to the Sound. We service FAAC, BFT, Linear, and Viking operators, among others, and we stock common parts locally so turnaround is quick. Before replacing an operator, we check the gate’s physical condition, because a corroded hinge that’s adding friction will burn out a new motor just as fast as it burned out the old one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelham Manor
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. Homeowners in Pelham Manor have a mix of older operators that came with their estate homes and newer retrofit systems, and we keep common parts for all of them in our local inventory. That means when your Linear arm or BFT board fails, we’re not waiting a week on a backorder. We diagnose the fault, confirm the price, and fix it, usually in one visit. Our Gate Repair team has been working on these brands for over two decades, so we know their failure patterns, especially in coastal environments like this one.
Common Gate Repair Problems We See in Pelham Manor Homes
- Seized hinge pins and latch bolts. Salt air penetrates iron hardware and causes internal corrosion. The pin rusts, swells, and snaps, leaving the gate stuck open or closed. We replace with stainless steel hardware that resists the same failure.
- Tilted stone pillars from freeze-thaw cycles. Coastal winters in Pelham Manor cycle between freezing and thawing repeatedly. Water gets into the mortar and stone, expands, and shifts the pillar. The gate then binds, and no amount of hinge adjustment fixes it until the pillar is re-plumbed.
- Hidden rust-through at welds and bottom rails. Weld joints are the most vulnerable part of any steel gate because the galvanization gets burned off during welding. Salt spray collects at those points, especially near the bottom rail. It rusts under the paint until the gate sags or the operator starts straining.
- Operator boards corroding in housings. Even weather-sealed operator housings aren’t fully sealed against Pelham Manor’s constant humidity and salt. Boards and limit switches corrode, and the gate stops mid-cycle. The fix is often board replacement with better sealing, not a full operator swap.
Pricing for Gate Repair in Pelham Manor, NY
Here’s what Pelham Manor homeowners can expect to pay for common gate repairs. A hinge pin replacement or single-hinge repair typically runs $180-$320. Gate realignment on a standard swing gate, including pillar assessment, runs $250-$475. Weld and rust repair on a corroded bottom rail or post section runs $300-$650 depending on how much steel needs replacing. Electric gate diagnosis and board replacement runs $240-$550. These are real ranges for this market, not national averages. The price you’re quoted is the price you pay. We confirm it before any work starts, and we honor the 90-Day Done Right Promise in writing. Call (877) 610-2993 for a free estimate, and ask about the $40-off repair over $200 and the no-trip-charge policy inside the county.
We Also Serve Cities Near Pelham Manor
Need gate repair just over the village line? We serve Pelham Manor and the surrounding communities, including Pelham, Mount Vernon, New Rochelle, and Baychester. When you call, tell us exactly where the gate is. That helps us bring the right parts and plan for the right fix.
Serving Pelham Manor, NY - Our Local Coverage Area
We’re based in the Pelham Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pelham Manor
The difference is Long Island Sound. Pelham Manor sits less than a mile from the water, and the salt-laden air accelerates oxidation on iron hinges, latches, and frame joints significantly. Inland communities like White Plains get the same rainfall but without the constant saline exposure. A painted iron gate in Pelham Manor that might last decades in White Plains can show serious corrosion in five to seven years. The fix is coastal-grade spec: stainless steel hinges and fixings, zinc-rich primer under paint, and regular sealing of weld joints. Call (877) 610-2993 and we’ll assess what your gate actually needs, not what a generic spec sheet says.
We check the pillar before touching the gate. If the pillar has tilted even a few degrees, the gate will bind against the latch post no matter how perfectly we adjust the hinges. We sight the pillar against a level, check the mortar for cracking, and look for frost heave at the base. On many Pelham Manor estates, the pillars are original stone or brick, some over a century old. Re-plumbing the pillar and repointing the stone often solves the problem entirely, and it’s usually less expensive than cutting and rewelding the gate. Call us first, and we’ll tell you honestly whether you have a gate problem or a pillar problem.
Most corroded gates in Pelham Manor can be repaired. We’re a repair-first company, which means we weld in new steel sections, replace rotted hardware, and restore the gate on site rather than pushing a full replacement. The exceptions are gates where the corrosion has spread through more than about half of the structural frame, at which point the cost of multiple sectional repairs approaches the cost of a new gate. We’ll tell you which situation you’re in. We have no incentive to sell you a replacement you don’t need. Call (877) 610-2993 and we’ll give you a straight answer and a written price.
Yes. The smartest move for Pelham Manor operators is better sealing, not just board replacement. We replace corroded boards and then seal the housing properly with Gate Access Control in Pelham Manor expertise, often adding dielectric grease on contacts and sealing entry points for wiring. On operators from FAAC, BFT, Linear, or Viking, we also check the gate’s physical resistance, because a corroded hinge that makes the motor work harder will shorten the life of any board. Protection is part of the repair, not an add-on we try to sell you. Estimates are free, and we confirm the price before any work starts.
Usually it’s the rack and pinion, though the motor’s limit switches can also get knocked out by storm surge and wind-driven salt spray. On slide gates in Pelham Manor, nor’easters force salt water and debris into the track, which corrodes the rack and pinion teeth and causes mid-track jams. A motor that’s straining against a rusted rack will trip its thermal overload or burn out. We inspect the full drive path before assuming it’s an electrical fault. Call (877) 610-2993 with your gate’s symptoms, and we’ll come out, diagnose, and fix it with the price agreed upfront.
Contact Gatewood Fence & Gate for Gate Repair in Pelham Manor
If your gate is sagging, seized, rusted through, or just won’t open, call us. Hal Gatewood’s name is on the shop, and the shop is down the road. You’ll get a live person on the phone, an honest assessment at your property, and a written price before any work begins. We serve Pelham Manor and the surrounding villages every day, with a 90-Day Done Right Promise on every job. Call (877) 610-2993 now for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pelham Manor and the surrounding communities since 2001.