Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Pelham
Gate repair in Pelham usually runs $220 to $480 for hinge and post work, and most jobs are done within two to three business days once we’ve seen the gate. If your gate is sagging, dragging, or the operator is straining and grinding, call (877) 610-2993 and talk to a live person. We know the older iron gates on Pelham’s pre-war streets, and we know why they fail. Hal Gatewood has been at this since 2001, and when a Pelham gate misbehaves, the answer is rarely “replace it.” It’s repair it properly, in place, and stand behind the work.
Why Gatewood Fence & Gate Is Pelham’s Preferred Gate Repair Company
Pelham is a small town with a long memory, and that suits us fine. Hal Gatewood owns Gatewood Fence & Gate, his name is on the shop and on every invoice, and if you want to drive to the shop and look him in the eye before scheduling, you can. We work in Pelham’s 10803 zip code regularly, from the streets around the train station to the leafier blocks off Colonial Avenue. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail, not a menu tree. When a Pelham homeowner calls at 9 p.m. because a gate won’t close, a person picks up and talks to them.
We are licensed, insured, and bonded, with a license number anyone can look up. Our technicians are background-checked and uniformed. Every job gets the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no “up to” language, no fine print. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Those are standing offers, not haggling points.
Our Gate Repair Services in Pelham
Hinge & Post Repair
In Pelham, a sagging gate is almost never a sagging gate. It’s a hinge post that has pulled loose from its original bluestone coping or brick pilaster. Fix the panel without the post and you’ll fix it twice. Freeze-thaw cycles heave the shallow, unreinforced footings on these pre-1940 properties, and the whole assembly creeps out of plumb. We re-set posts in deeper concrete with stainless steel expansion anchors, fabricate offset hinge plates to match the original pilaster profile, and re-hang the gate so it swings square and the operator isn’t fighting dead weight.
Weld & Rust Repair
Salt-laden air off Pelham Bay and the Long Island Sound finds its way into every ferrous surface on an ornamental iron gate. We see galvanized hinge pins corroding years faster here than in landlocked Westchester towns. Galvanized is a sacrificial coating; once it’s gone, the underlying steel pits and binds. We grind out the rust, weld blown-out joints on site so your gate stays in your driveway, and use painted steel or stainless fixings that actually hold up on the coast. No hauling the gate to a shop and leaving your driveway open for a week.
Gate Realignment
When both gate leaves still exist but the gate drags on the ground, racks against the latch, or the operator can’t complete a full cycle, the problem is alignment. On Pelham’s older properties, the culprit is usually a post that shifted during the last freeze cycle, or a hinge that has worn enough to drop the leaf a full inch. We bring the gate back to square, adjust the operator’s close and open limits, and confirm the entrapment protection is still doing its job. A gate that closes on its own doesn’t stay fixed by wishing.
Electric & Automatic Gate Repair
When an automatic gate stops mid-cycle every March, don’t blame the operator board first. Blame the post that moved over the winter and the limit switch that is now misaligned. Our Gate Repair team rebuilds the motion path before touching the electronics, which is why we don’t swap operator boards on a guess. We service Viking, Ghost Controls, and DoorKing among others, and we adjust, test, and verify the full open-close cycle before we leave. Show me the gate closing on its own and I’ll show you where it’s failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelham
Our crews are certified to service nine major gate operator brands, and in Pelham we see a lot of Viking, Ghost Controls, and DoorKing units on older installations, with some Elite and Mighty Mule on newer ones. That breadth matters when a Pelham homeowner has an operator from 2008 still limping along and a board from a brand that changed ownership twice. We keep common replacement parts and boards in local stock where we can, and for older units that need a specific board, we source and quote before any work starts. We don’t “discover” a surprise part halfway through the job. The price is quoted and agreed before we begin.
Common Gate Repair Problems We See in Pelham Homes
- Bluestone-anchored posts pulling loose. Original bluestone coping and brick pilasters from the 1890s through 1930s sit on shallow footings without rebar. A few freeze-thaw cycles pry the anchors loose, and the gate starts listing. Standard surface-mount hardware often can’t be retrofitted cleanly; it needs custom fabrication to match the original profile.
- Salt-air corrosion on galvanized steel. Long Island Sound isn’t a distant rumor in Pelham. Salt-laden air accelerates rust on hinge pins, post anchors, and weld joints, and the ferrous hardware ages visibly faster than it would in White Plains. Stainless fixings and painted steel last measurably longer out here.
- Operator overload from binding hinges. When a hinge binds from corrosion or a shifted post, the operator draws more current and eventually trips the thermal overload. The fix isn’t a bigger board; it’s freeing the hinge and rebalancing the gate.
- Mis-set close limits on tilted gates. A gate that leans half an inch closes on its own. Operators with mismatched close limits then strain, grind, or reverse a foot short. We adjust the limits only after the post and hinges are squared.
Pricing for Gate Repair in Pelham, NY
Here are real numbers for Pelham’s market. A hinge pin replacement or single-leaf realignment typically runs $180 to $320. Re-setting a pulled post in a deeper concrete footing with stainless anchors runs $350 to $550 depending on the pilaster material and access. A full weld and rust repair on a double iron gate, including on-site grinding and repainting, typically lands between $450 and $800. Electric gate diagnostics and operator limit adjustments start around $160 to $260, and if a new board or motor is required, we price the part and labor up front. Every price is quoted and agreed before any work starts. No trip charge inside Westchester County, and we’ll give you a free second opinion on any written estimate. Call (877) 610-2993 for a firm number.
We Also Serve Cities Near Pelham
If you’re just over the line in Pelham Manor, Mount Vernon, New Rochelle, or Baychester, we’re still the same crew. Gate Repair in Pelham is home base for this page, but the trucks roll through the whole area, and the same 90-Day Done Right Promise applies. Call (877) 610-2993 and a live person will give you a straight answer.
Serving Pelham, NY - Our Local Coverage Area
We’re based in the Pelham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Pelham
The bluestone base on your pre-war pilaster almost certainly sits on a shallow, unreinforced concrete footing. Westchester runs through 20 to 30 freeze-thaw cycles each winter, and each cycle exerts hydraulic pressure on that footing until the anchor bolts lose their bite. That’s why the post pulls loose suddenly, usually in March or April. The fix is to re-set the post deeper with stainless steel expansion anchors, not to lag it back into the same crumbled footing. Call (877) 610-2993 and we’ll inspect the exact failure before quoting.
Salt air accelerates the breakdown of zinc galvanization on hinge pins, post anchors, and any unpainted steel. Once the galvanizing is exhausted, the underlying steel pits and the hinge starts binding. Paint slows the process but doesn’t stop it, which is why we use painted steel or stainless fixings on coastal repairs rather than bare galvanized hardware. For an exact assessment of your gate’s ferrous components, call (877) 610-2993; the estimate is free.
Yes, but the repair has to address both the cracked pilaster and the anchor it holds. We remove the gate, assess the pilaster’s remaining integrity, re-set or reinforce the base, and fabricate offset hinge plates that distribute the gate’s weight across sound masonry rather than the cracked section. Standard surface-mount hinges won’t fit most original Pelham pilasters, which is exactly the kind of detail an out-of-town contractor misses. We quote it up front, not “once we open it up.” For a firm price, call (877) 610-2993.
Because the post shifted over the winter and the operator’s limit switch no longer matches where the gate actually stops. This happens when freeze-thaw heaving moves a post a half inch out of plumb. The operator races past its learned limit, the board reads a fault, and the gate freezes mid-cycle. The fix is post and hinge restoration first, then limit adjustment. Call (877) 610-2993 and we’ll confirm whether it’s the post or the board before recommend anything.
Yes. Entrapment protection is not optional on an automatic gate in a residential setting where children, pets, or delivery drivers can be near the gate path. Older operators often lack proper photo eyes or edge sensors, and we won’t leave one running without functioning protection. We can retrofit modern safety edges and photo eyes to most older systems, and we include that check in every automatic gate repair in Pelham. Call (877) 610-2993 to schedule an inspection; a live person answers.
Call Gatewood Fence & Gate for Gate Repair in Pelham
When a salt-rusted hinge finally binds, or a post pulls out of its bluestone base, don’t wait for the gate to finish the job itself. Call (877) 610-2993 and you’ll get a live person on our end, any hour. We’ll schedule the visit, quote the work before we start, and back it all with the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pelham since 2001.