Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Pelham Manor
Gate repair in Pelham Manor usually comes down to three things: a hinge that seized, a post that shifted, or a weld that let go. We’ve been fixing all three since 2001. If your ornamental iron gate drags on the stone pillar, swings crooked, or won’t latch, call us at (877) 610-2993 and we’ll get someone to your street fast. The problem is rarely just the part you can see. Pelham Manor gates sit a mile from Long Island Sound, and that salt air works on iron hinges and latch bolts year-round, even when the gate looks fine from the driveway. We carry the hinges, rollers, latch hardware, and welding gear on the truck, so most Pelham Manor calls get fixed in one visit, not two.
Hal Gatewood has been welding and repairing gates across Westchester’s coastal villages for over two decades. When you call, a live person answers. When we quote a price, that’s the price. And when we finish the job, it carries the 90-Day Done Right Promise in writing. No voicemail maze. No call center three states away. Just a local crew that knows Pelham Manor’s gates and the salt air they live in.
Why Gatewood Fence & Gate Is Pelham Manor’s Preferred Gate Parts & Welding Company
We’re not a franchise and we don’t operate like one. Hal Gatewood’s name is on the shop and on every invoice. Our published address and license number are there for anyone to look up. That matters in a village like Pelham Manor, where people check references and expect to see the same face next time. We’ve earned a strong local reputation in 10803 and the surrounding villages by doing the repair the right way, not the quick way.
Our crews serve Pelham Manor regularly, so we know the housing stock. We know the Tudor Revival estates off Boston Post Road, the Colonial Revivals on the curving side streets, the Craftsman homes with original ironwork that has been holding gates since before World War II. When you call about a sagging gate on Pelhamdale Avenue or a seized hinge near Shore Road, we don’t need directions to understand what you’re describing. We’ve seen that exact gate style a hundred times.
We answer the phone around the clock. Not a voicemail. Not a chatbot. You get a person who can schedule the visit and tell you what to expect. If the gate won’t close and you need it secured tonight, we’ll get there. Every job includes the 90-Day Done Right Promise: if it’s not done right, one call brings us back. No runaround, no fine print.
Our Gate Parts & Welding Services in Pelham Manor
Hinge Replacement
Salt air near Long Island Sound corrodes iron hinge pins faster than mechanical wear ever could. A hinge that worked smoothly in June can grind to a stop by March. We replace seized and rusted hinges with galvanized or stainless hardware that actually holds up on coastal properties. We also align the gate so the new hinge isn’t carrying load it shouldn’t be. In Pelham Manor, hinge replacement on a typical ornamental swing gate runs $180 to $420, depending on the weight of the gate and how much frame repair the corrosion left behind.
Post Replacement
Here’s what we see repeatedly in Pelham Manor: the gate drags or won’t latch, and the homeowner assumes the hinge is bad. Then we look at the post. Century-old stone pillars frost-heave a few degrees through coastal freeze-thaw cycles, pulling the hinge post out of plumb. You can weld on a new hinge and the gate will still drag. We re-plumb or repoint the pillar, set a new steel post footing in fresh concrete, and only then address the hinge and latch. Post replacement for a steel or iron gate post typically runs $300 to $700 in Pelham Manor, with masonry repointing billed separately if the pillar itself needs work. That’s the fix that lasts.
Rail Repair
Wrought iron rail work rusts at the frame joints and welds first, because the coating is thinnest there. We weld repair plates and replacement rail sections on site, matching the profile of your existing ironwork so the repair doesn’t look like a patch. For period gates on 1895 to 1940 estates, that often means sourcing and shaping bar stock to match the original hand-forged look. Rail repair in Pelham Manor typically runs $150 to $450 depending on how much of the rail is rusted through and whether the gate needs to be removed or can be worked in place.
Custom Welding
Sometimes the part you need doesn’t exist anymore. Original ornamental iron gate hinges, drop rods, finials, and latch brackets from a 1920s estate gate were often made to order. We fabricate and weld replacements on site, matching the original dimensions and patina as closely as possible. Hal welds in your driveway, not in a shop forty miles away. Custom welding work in Pelham Manor starts around $250 and goes up based on the complexity of the piece. We’ll give you a written price before any weld is struck.
Our Gate Parts & Welding team also handles gate rollers, latch and lock replacement, and full gate frame straightening. If the gate is worth saving, we save it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pelham Manor
We service and stock parts for the major gate automation brands you’re likely to have on a Pelham Manor property: Viking, DoorKing, and Ghost Controls are common on the larger estates. We carry replacement rollers, hinge hardware, latch kits, and operator parts for these systems, and we know their corrosion failure points on coastal installations. If your gate opener keeps tripping the safety reverse, we’ll check the operator board for salt-air damage and the physical gate hardware before recommending a new board. We service nine major brands total, so most repair calls don’t require ordering anything.
Common Gate Parts & Welding Problems We See in Pelham Manor Homes
- Salt-corroded hinge pins and latch bolts. Within a few years, iron pins rust to the point that the gate binds or the latch won’t engage. We replace them with galvanized or stainless hardware rated for coastal exposure.
- Frost-heaved stone pillars pushing gates out of alignment. This is the Pelham Manor signature. The pillar tilts a few degrees, the gate drags, and the latch misses the catch. Re-plumb the pillar first, then the gate work holds true.
- Rusted welds at frame joints. Painted steel rusts where the coating is thin, and that’s every weld seam. We grind out the rust, weld fresh steel in, and repaint with a marine-grade coating that slows the next cycle.
- Coated hardware that looked fine but wasn’t. Powder-coated gate hinges look great for two years near the Sound, then the coating fails at the moving parts and corrosion eats through from underneath. We recommend what actually works here, not what works in Denver.
Pricing for Gate Parts & Welding in Pelham Manor, NY
Every job gets a written, upfront price before any work starts. You’ll agree to the number before we strike an arc or turn a wrench, and that’s the number you’ll pay. Here’s what Pelham Manor homeowners can expect:
- Hinge replacement: $180 to $420 per gate, depending on weight and corrosion damage
- Post replacement (steel or iron): $300 to $700, plus masonry repointing if the pillar needs it
- Rail repair and welding: $150 to $450 based on the extent of rust-through
- Custom welding and fabrication: starts at $250, quoted per piece
- Latch and lock replacement: $90 to $220 for most ornamental gate hardware
We don’t charge a trip fee inside the county. Seniors and veterans get a permanent 10% discount. Any repair over $200 gets $40 off. And if another company quoted you a repair in writing, we’ll give you a free second opinion. No haggling required. Call (877) 610-2993 for your exact quote.
We Also Serve Cities Near Pelham Manor
We work throughout southern Westchester, including Pelham, Mount Vernon, New Rochelle, and Baychester. If you’re in one of those villages with a gate that won’t close or a pillar that’s shifted, call us. Our Gate Parts & Welding in Pelham Manor crew covers the whole area, and scheduling is coordinated from our New York City office. Same honest pricing, same written promise.
Serving Pelham Manor, NY - Our Local Coverage Area
We’re based in the Pelham Manor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Pelham Manor
Salt air from the Sound deposits a corrosive film on exposed iron hardware every single day, and Pelham Manor’s position less than a mile from the water means that film never really washes off. Hinges, latch bolts, and weld seams rust through in three to five years here, while the same hardware in inland towns like White Plains might last a decade or more. The salt accelerates oxidation at the moving parts where protective coating wears thin first. The fix is galvanized or stainless hardware, not painted steel. Call (877) 610-2993 and we’ll tell you what your specific gate needs to survive the coast.
In Pelham Manor, nine times out of ten it’s the pillar. Century-old stone pillars frost-heave through coastal freeze-thaw cycles and tilt a few degrees, which pulls the hinge post out of plumb and drags the whole gate down. We’ll assess the pillar first. If it’s shifted, we re-plumb it and re-set the post footing in fresh concrete before touching the hinges. Fixing the hinge without fixing the pillar means you’ll be calling us again next winter. Call (877) 610-2993 for a free assessment.
Stainless steel hinges are the right answer for Pelham Manor’s salt air. Galvanized works and costs less, but the coating eventually sacrifices itself and you’ll replace them again. Stainless holds up far longer within sight of the Sound. We’ll show you the options and quote both, so you can decide with real numbers. Call (877) 610-2993 and we’ll bring samples.
Yes. We weld new hinge posts onto original ornamental iron gates all over 10803. The key is matching the heat, the rod, and the technique to the age and composition of the original iron. Century-old wrought iron welds differently than modern mild steel, and if you rush it you’ll crack the original rail. Hal has been doing this since 2001 and he works slow enough to do it right. Your gate stays in the driveway, and the original scrollwork stays intact. Call (877) 610-2993 for a quote.
You have to check the physical gate first. In Pelham Manor, salt corrosion on the hinges and hinge brackets creates enough resistance that the operator’s safety system reads it as an obstruction and reverses. We’ll disconnect the operator and swing the gate by hand. If it’s stiff, that’s the corrosion. If it swings freely, the issue is the operator board, the limit switches, or the safety edges. We service Viking, DoorKing, Ghost Controls, and six other major brands, so we can diagnose and fix either way. Call (877) 610-2993 to get it sorted.
Call Gatewood Fence & Gate for Pelham Manor Gate Parts & Welding
If your gate needs welding, hinges, a new post, or the latch just won’t catch, call (877) 610-2993. We’ll give you a straight answer, a written price, and a time we’ll actually show up. Hal Gatewood’s name is on the shop and on every job. That’s the accountability that matters when the gate decides to fail on a Sunday night before a storm. We’re here around the clock. Call now for your free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pelham Manor since 2001.