Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Murphy
Gate repair in Murphy usually means one of two things: a swing gate that’s sagging off its hinge post, or an automatic opener that’s grinding, beeping, or refusing to move at all. In this city, most calls run $190-$430 depending on what’s actually worn out. Hal Gatewood and his crew handle both problems every week across 75094, and we answer the phone at (877) 610-2993 when you call.
Murphy’s neighborhoods were almost all built in the same 15-year window, which means thousands of gates are now hitting the same repair age at once. That’s not a coincidence. The hardware wears on a schedule. We know which failures show up first on a 2008-era ornamental iron gate in Rolling Ridge versus a 2014 aluminum gate in Maxwell Creek, and we start there before assuming anything.
Why Gatewood Fence & Gate Is Murphy’s Preferred Gate Repair Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop. Not a franchise, not a rotating crew of subcontractors. When you call about a driveway gate in Murphy, you get a live person, not a voicemail. If the gate is binding against the latch post because summer heat shifted the footing, the person who shows up will know to check the post before selling you a new opener.
We work in Murphy often enough that we know the HOA reality here. Virtually every subdivision has architectural standards that govern gate color, height, and hardware style. A generic replacement panel will get flagged. We match finishes. We order the right finials. We handle repair work so it passes review the first time instead of generating a compliance letter.
Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. Proudly serving local communities for over 29 years, still owner-operated, still answering the phone around the clock.
Our Gate Repair Services in Murphy
Electric Gate Repair
Electric gate repair in Murphy covers the opener motor, the control board, safety photocells, keypad wiring, and the limit switches that tell the gate where to stop. Here in Collin County, hot summers bake control boards inside sealed boxes until condensation builds and shorts connections. We diagnose the board before swapping it, because sometimes a $40 sensor is the whole problem. We service Linear, Viking, Ghost Controls, and DoorKing, and we recalibrate the travel limits so the safety edge tests clean.
Automatic Gate Repair
Automatic gate repair in Murphy usually starts with the same question: is the gate moving crooked, stopping short, or not moving at all? If it’s binding, the opener works harder than it should and the reversing edge trips. On a 2010-era swing gate in Murphy, the most common cause is post heave from black-clay expansion, not a failed motor. We fix the post first, then the automation. Swapping the opener without fixing the alignment just means you’ll buy another opener in two years.
Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Murphy’s expansive clay soil swells after spring rains and shrinks in August heat, so posts work loose season after season. We re-plumb the post, repair or replace the hinge, and weld on site so the gate stays in your driveway. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
Gate realignment in Murphy means bringing the gate panel back to square with the posts, restoring even clearance at the latch side, and resetting the opener travel so it stops exactly where it should. On automatic gates, misalignment is the top reason safety sensors beep and reverse. We see it on HOA entry gates after hard freezes and after long wet springs. We correct the geometry first, then reset the automation to match.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Murphy
We work on Linear, Viking, Ghost Controls, and DoorKing openers daily across Murphy, and we keep common parts for those brands close at hand, not shipped in from three states away. If your keypad is dead, the arm is pulling loose, or the motor hums but won’t turn, we can usually restore the existing opener rather than upsell you into replacing it. Some older DoorKing and Viking boards are still repairable if the damage is isolated. We’ll tell you straight if it isn’t.
Common Gate Repair Problems We See in Murphy Homes
- Post heave from black-clay soil: Murphy sits on Collin County’s expansive clay, which swells after spring rain and cracks in summer. Gates that worked in March start binding against the latch by June because the post moved, not the panel.
- HOA finish-matching issues: A rusted lower rail on an iron gate can’t just be swapped for whatever the supply house has in stock. Murphy HOAs keep finish standards, and a mismatch in powder-coat color draws a violation letter before the next board meeting.
- Openers failing on 2000-2015 tract-home gates: Thousands of homes here were built in a tight window, so thousands of opener control boards and capacitor units are reaching end of life around the same time. When one fails on your street, expect a few neighbors to have the same issue within a year.
- Shared HOA entrance gates binding after freezes: When ice forms around the gate frame or loop detectors freeze over, the master entry gate beeps and reverses until someone resets it. These calls come in clusters after hard freezes like the February 2021 event.
Pricing for Gate Repair in Murphy, TX
Gate repair pricing in Murphy runs by the job, not the hour, and you’ll hear the number before any work starts. A hinge replacement with post re-plumb typically lands between $190 and $320. Gate realignment on a double swing gate runs $150 to $280. Electric opener diagnosis and limit-switch reset falls around $120 to $220. A full operator replacement, when it’s actually needed, runs $475 to $900 depending on the gate length and opener class. A typical automatic gate repair in Murphy sits in the $220-$430 range. We don’t charge a trip fee inside the county, and every repair over $200 carries $40 off. Seniors and veterans get 10% off permanently. You’ll always get the quote agreed before we touch the gate, and the 90-Day Done Right Promise says it stays fixed or we come back.
We Also Serve Cities Near Murphy
Our Gate Repair coverage stretches past Murphy’s city limits into Sachse, Wylie, Lucas, and Plano. If you’re a few minutes outside 75094, call anyway. If we can reach your driveway, we’ll handle the job the same way we handle Gate Repair in Murphy work, with a published address, a live phone, and a warranty in writing.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Murphy
We match the finish before the repair starts. On Murphy gates, that usually means ordering the correct powder-coat color, finial profile, and hinge style from the original manufacturer spec, then documenting the match for your HOA file. We’ve done this enough in Rolling Ridge, Maxwell Creek, and other HOA communities here that we know what gets flagged and what passes. Call (877) 610-2993 and tell us the community, and we’ll tell you how the finish matching works for your specific gate style.
Because the hinge post moved. Murphy’s black-clay soil absorbs spring moisture, swells, and pushes the post slightly off plumb. By late summer the clay shrinks back, and the gate clears again. It’s not the opener, and it’s not going to fix itself permanently. We re-plumb the post and reset the geometry so the gate doesn’t bind again next March. Call us at (877) 610-2993 before the next rain cycle.
It’s usually both. A wet loop detector or a misaligned photocell after a rain storm can trip the reversing edge on a shared HOA gate, and the system goes into fault. The gate is doing what it’s told, but the root cause is usually water intrusion in the sensor loop or a post that shifted enough to take the photo beam out of alignment. It’s repairable the same day. Call (877) 610-2993 and we’ll get the master gate moving again before residents start calling the management company.
Usually the connection fails before the post breaks. Hard freezes cause the metal gate frame and the opener bracket to contract at different rates, and the bolt holes or the arm bracket let go. But we always check the post plumb while we’re there, because a freeze that pulls the arm loose often arrives on top of existing clay heave. We’ll repair the connection, reinforce the bracket, and tell you if the post needs work too. Estimates are free at (877) 610-2993.
Start with a written specification and a photo of the proposed operator, then submit it to your HOA’s architectural review committee before ordering anything. We help Murphy homeowners document the replacement operator, including how it matches the existing gate’s finish and how the safety edges and photocells meet current standards. A discontinued model doesn’t need to mean a compliance fight. Call (877) 610-2993 and we’ll walk through what your community will ask to see.
If your gate is sagging, grinding, or refusing to open in Murphy, call (877) 610-2993. A live person answers, and the person who shows up will be from Gatewood Fence & Gate, ready to fix what’s actually wrong, quote the price before the work starts, and stand behind it for 90 days. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Murphy since 2001.