Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Lucas, TX
When a gate stops opening in Lucas, it’s usually one of three things: a hinge post that has shifted in the clay, an operator that has lost its mind, or a weld that finally let go. Gate repair in Lucas typically costs between $180 and $740 depending on whether we’re resetting a post, replacing a board, or welding a failed joint. We usually do it the same day you call, and the person who answers at (877) 610-2993 is a real human being, not a recording. If you’re standing in your driveway right now looking at a gate that won’t budge, call us. We’ll tell you what it likely is before we even hang up.
Why Lucas Homes Are Different
Lucas enforces one of the strictest large-lot zoning requirements in Collin County - effectively a minimum one-acre standard - which means nearly every residential property has a long private driveway with an automatic or manual entry gate. Demand for gate repair per household here is dramatically higher than in adjacent Allen or McKinney, and most calls involve estate-grade ornamental iron or ranch-style swing gates rather than the lightweight aluminum driveway gates common in denser suburbs.
The housing stock tells the rest of the story. Lucas is almost entirely custom and semi-custom homes built from the late 1990s through the 2020s on acreage lots, many with equestrian facilities. Gate systems tend to be heavy-duty: wrought iron or tubular steel, often 12-16 feet wide, with underground loop detectors and solar or hardwired operators. Owners expect repairs that match the property aesthetic, not a quick patch that looks like it came from a different decade.
Then there’s the Blackland Prairie clay. This soil expands dramatically when wet and shrinks and cracks during the prolonged summer droughts common to Collin County. A gate that aligned perfectly in spring often rubs or drags on the ground by August, not because the gate changed but because the ground underneath it did. Because Lucas allows horses on residential lots, many properties run two separate gate systems - an ornamental automatic entry gate at the street and a functional pipe-panel ranch gate into the pasture - so a single service call often involves diagnosing two mechanically different gates on the same property.
Gate Repair in Lucas
Gate repair in Lucas usually costs between $180 and $740 depending on whether the problem is a hinge, a post, an opener board, or a weld that finally let go. We get to Lucas properties fast because we know exactly how to navigate the acreage roads off East Lucas Road, Forest Grove Drive, and Country Club Road, and we’ll have a straightforward quote in your hand before any work starts. Our Gate Repair work covers everything from a sagging ranch gate to a dead operator on a 16-foot ornamental entry.
Electric Gate Repair
When your electric gate stops responding to a keypad or remote, the issue is usually a dead operator board, a failed loop detector, or a power interruption at the pedestal. We carry parts for Linear, Viking, Ghost Controls, and DoorKing, and on most Lucas calls we can diagnose and repair the operator the same day we arrive. Operator board replacement on a Viking or Linear unit runs $280 to $520. Long gravel driveways with horse trailers mean loop detectors get damaged by heavy loads and shifting ground, so we test loops first before touching any logic board.
Hinge & Post Repair
Heavy wrought iron gates on Lucas estates put enormous strain on hinges and post welds. When a hinge pin wears or a weld cracks, the gate leans, the operator fights the weight, and the whole system fails a little more each week. A hinge replacement on a standard steel gate runs $180 to $320, while post reset and concrete base repair typically runs $340 to $740 depending on post depth and whether we’re welding the post or bolting to a new base. The Blackland Prairie clay under Lucas expands when wet and contracts during droughts, so posts shift seasonally. We’ll reset the post with a deeper, more stable base than the one the original builder used.
Gate Realignment
A gate that rubs the driveway or won’t latch at the closed position needs realignment, plain as that. Because Lucas’s clay soil shrinks and heaves through the year, gates that were square in spring often sit low on one side by late summer. Full realignment after a soil shift runs $160 to $280. We don’t just lift the gate and call it done. We check the post depth, the hinge geometry, and the operator travel limits, then set the whole assembly so it swings true in every season it’ll see.
How fast can you get to Lucas for a gate repair?
We can usually reach Lucas addresses the same day for emergency repairs, and we’ll give you a firm arrival window when you call (877) 610-2993. Our crews work routes through Lucas regularly, so emergency calls around Forest Grove Drive or Country Club Road don’t wait long. If your gate is stuck open or won’t close at night, tell the person who answers, because that changes how we route the truck.
Is gate repair more expensive in Lucas than in nearby cities?
No, we charge the same rates across Lucas, Allen, Murphy, Plano, and Fairview, and we publish our repair ranges so you know what to expect. The main reason Lucas jobs sometimes run higher is that estate gates here are heavier and wider than the aluminum subdivision gates common in denser cities, which means more labor and sometimes more welding. But the rate structure stays the same, and you’ll see the exact price before we start.
Gate Installation in Lucas
Most gate installations in Lucas run between $1,800 and $9,500, with estate-grade ornamental iron driveway gates typically landing in the $4,000-$7,500 range given the lot sizes and heavyweight steel most property owners choose. We work throughout the 75002 area, from homes off Lucas Road down to properties along Country Club Road, and we quote the full price before any work starts. Our Gate Installation includes everything from post holes to operator programming - not a gate dropped in your driveway with a handshake and a bill.
Driveway Gate Installation
Your driveway gate is the first thing anyone sees from the road, and in Lucas most of them have to carry real weight: tubular steel, wrought iron, 12 to 16 feet across, sometimes solar-powered operators, sometimes hardwired. An estate-grade ornamental double gate, 12 to 16 feet wide with hardwired operators and safety edges, usually falls between $5,500 and $9,500. We measure, build, weld on site, and install the operator and safety edges as part of the job. We don’t leave you to find someone else for the power run.
Swing Gate Installation
Swing gates are the classic Lucas look, especially on acreage with established trees and an ornamental entry. A basic single swing gate with a manual latch starts around $1,800 to $2,800, while an automatic single swing gate with a mid-range operator typically runs $3,200 to $5,000. We set hinge posts deeper than the minimum because we know what Blackland Prairie clay does over a season. We weld the frame on site, hang the gate with the right clearance, and tune the operator so it doesn’t slam or stall.
Sliding Gate Installation
For properties where the driveway rises steeply or drainage crosses the entry, a sliding gate can be the better call. No swing arc to fight the grade. We install cantilever and V-track sliders, set the concrete pad properly, and weld the frame so the gate doesn’t chatter or bind on the rollers. Ranch-style pipe gates for pasture access run $900 to $2,200 per leaf depending on length and hinges. On Lucas properties with horses, this is also the style we recommend when the driveway is shared between the house entry and pasture access.
What does a full gate installation include?
A full installation includes post setting or replacement, gate fabrication and welding, operator mounting and wiring, safety edge and photo-eye installation, keypad or remote programming, and a final swing test with you present. We handle the power run from house or pedestal to operator, and we don’t call it done until the gate reverses properly on contact. The price we quote is the price you pay, agreed in writing before we dig the first hole.
How long does a gate installation take in Lucas?
Most standard installations take one to two days on site, with ornamental iron or custom fabrication adding a few days for welding and paint curing. We schedule a free measure first, then deliver a written quote with a start date that works for both of us. No same-day installation promises - this work is measured, ordered, and built to fit your specific driveway and soil conditions.
Gate Motor & Opener in Lucas
Gate motor and opener repair in Lucas usually lands between $220 and $460 when you’re dealing with a residential swing or slide system, and most jobs can be scheduled within 48 hours. If the operator is dead and the gate won’t budge, you’ll want someone who knows that Lucas driveways tend to be long, the gates heavy, and the clay soil underneath always moving. Our Gate Motor & Opener service covers diagnostics, repair, and full replacement for every major brand on the market.
Motor Repair
Most motor repairs in Lucas fall between $180 and $420. That covers bad capacitors, fried control boards, stripped gears, limit switch failures, and water intrusion. Here’s a thing we see a lot in Lucas: the motor still runs, but the gate only opens partway or reverses for no reason. Nine times out of ten that’s a limit switch or a safety edge issue, not the motor. We test everything on site and tell you straight what needs fixing. Hal has been known to talk a customer out of a $900 replacement when a $180 limit switch was the real problem.
Motor Installation
A new motor installation in Lucas typically runs $1,200 to $2,800 depending on whether you’re powering a single swing arm, a double swing, or a slide gate. Lucas properties almost always mean the heavier end of that range because the gates themselves are heavier. We quote the full price before any work starts, and that number doesn’t move. We also handle the wiring from the house or pedestal to the operator, which on a long Lucas driveway can be a bigger part of the job than the motor itself.
Slide Motor Service
Slide gate systems in Lucas fail differently than swing gates. The motor might be fine while the track or the rollers underneath are the real problem. A slide motor repair or replacement in Lucas typically lands between $300 and $1,600. Before we ever touch the motor, we check the track, the wheels, the guide posts, and the ground itself. Remember that Blackland Prairie clay. When it shrinks in August, a slide gate that ran smoothly in April can start dragging, and no new motor will fix a gate that’s fighting its own frame.
How fast can you get to a gate opener emergency in Lucas?
Most Lucas calls can be scheduled within 48 hours, and when a gate is stuck open or won’t close at all we treat it as urgent and get there sooner whenever possible. We answer the phone live around the clock, so you’ll know when we’re coming before you hang up. Call (877) 610-2993 and we’ll give you a real window.
What kind of warranty comes with a gate motor repair in Lucas?
Every repair carries the 90-Day Done Right Promise in writing. If the same issue comes back within 90 days, Hal comes back and makes it right at no charge. No fine print, no “that part’s not covered” routine. The promise is stamped on the invoice, and Hal Gatewood is the one who honors it.
Gate Access Control in Lucas
If your gate keypad stopped reading codes, your remote won’t trigger the opener, or you’re tired of getting out of the truck to punch in a code at the end of a long Lucas driveway, you want a straight answer. Gate access control repair in Lucas typically runs $185 to $430 for most keypad, receiver, and wiring fixes, and we can usually get to your property the same day. Our Gate Access Control work covers keypads, remotes, phone entry, and card readers for both the ornamental street gate and the pasture gate behind it.
Keypad Entry
A keypad sitting on a post at the end of a hundred-yard driveway takes a beating from Texas sun and the occasional ice storm. A keypad replacement including reprogramming typically runs $220 to $340. We replace worn keypad membranes, rewire corroded terminals, and reprogram codes when a new tenant, ranch hand, or family member moves in. Many Lucas homeowners with equestrian property keep two gate systems, so we can set one keypad to open the street gate and a separate code for the pasture gate. The Blackland Prairie clay under Lucas swells in wet springs and shrinks during the dry, hot stretch from July into September. When a keypad pedestal pulls away from the post, the wiring inside can stretch and short. We see a spike of “my keypad won’t respond” calls in August for exactly this reason.
Remote Control
When your remote works from twenty feet away but not from the road, the problem is usually a shorted antenna wire or a receiver that’s drifted off frequency. Replacing a receiver board on a Gatewood-serviced brand is usually $185 to $310, parts and labor included. We diagnose the actual fault rather than telling you to buy three new remotes. If you’re running older Viking or DoorKing openers on a Lucas acreage lot, we carry compatible transmitters and can often have you programmed and working the same day.
Phone Entry Systems
Phone entry systems let you buzz open the gate from the house or from anywhere with cell signal. A new phone entry system install on a single driveway gate runs $640 to $1,100, depending on whether we’re pulling new wire from the house. We wire the telephone entry board into your existing opener, set up call-forwarding to your cell, and test it with you standing at the gate. Lucas properties with a detached shop or barn often extend phone entry to a second gate, so delivery drivers and farriers can get in without you walking the whole spread.
How fast can you get to a Lucas property for access control repair?
Most Lucas calls get same-day service when the call comes in before early afternoon. The drive from our metro office to neighborhoods off Lucas Road and FM 3286 is short enough that we can usually have someone on site within a couple of hours. Call (877) 610-2993 and the person who answers will give you a straight window, not a four-hour range.
Do you stand behind access control repairs in Lucas?
Every job carries our 90-Day Done Right Promise in writing. If the same problem comes back within 90 days, we come back and fix it, no charge, no runaround. That applies to every keypad, receiver, card reader, and phone entry repair we do in Lucas. We also offer a free second opinion on any written estimate from another company, and there’s $40 off any repair over $200.
Gate Parts & Welding in Lucas
Gate parts and welding in Lucas means working on heavy estate gates that other companies won’t touch. We’re talking 12 to 16-foot ornamental iron swing gates, pipe-panel ranch gates into horse pastures, and operators that have to survive Blackland Prairie clay and Texas summers. Hal Gatewood has been fixing gates like these since 2001, and we do the welding on site in your driveway. Our Gate Parts & Welding service is built for gates that weren’t bought at a big-box store and can’t be fixed with a catalog bracket.
Hinge Replacement
Hinge replacement on a standard ornamental driveway gate in Lucas runs $180 to $450, depending on gate weight and whether we’re replacing one hinge or a full set. These gates weigh hundreds of pounds, and when a hinge fails, it’s usually because the post has shifted or the weld at the post bracket has fatigued. We remove the old hinge, inspect the post for movement, and weld a new heavy-duty hinge in place. A gate sags in the hinge post, not in the middle, and that’s where we start. On properties with horse pasture gates, we often replace rusted barrel hinges with greasable bearing hinges so they don’t seize up again in six months.
Post Replacement
Post replacement in Lucas is a soil problem as much as a steel problem. Blackland Prairie clay expands when it rains and contracts hard in a dry August. Post replacement with deeper concrete footing starts around $350 and tops out near $900 for a 14-foot gate post that requires welding and repainting. We dig out the old post, set a new one with a deeper concrete footing than the original, and weld the gate back on square. If the operator pedestal has shifted too, we reset that at the same time. A gate post that was plumb in April can lean two inches by Labor Day, and the only real fix is starting over with a better base.
Custom Welding
Custom welding is where we earn our keep. Off-the-shelf parts don’t fit a 14-foot wrought-iron gate that was fabricated custom for a home on a two-acre lot. Typical bracket fabrication and welding runs $120 to $350, quoted by the job after we see the gate. We weld on site, fabricating hinge brackets, stiffeners, latch mounts, and gate operator mounting plates to match the existing steel. The finished weld gets ground smooth and painted so it disappears into the gate. We also do custom fabrication for new gate installations in Lucas, including matching the original scrollwork and picket spacing so a repair doesn’t look like a patch job.
Why does my ornamental gate drag on the driveway in late summer after being fine in spring?
The Blackland Prairie clay under Lucas expands in wet spring weather and contracts hard during the dry heat of July and August. That contraction lets gate posts settle and tilt just enough that a heavy ornamental gate begins dragging or rubbing. We fix it by re-setting the post on a deeper footing and re-welding the hinge brackets, not by shaving the gate bottom, which weakens the steel. Call (877) 610-2993 for an assessment.
Can you reinforce a sagging 14-foot wrought-iron gate without replacing the whole panel?
Most of the time, yes. We cut out the failed weld, straighten and re-square the gate, and weld in a heavier hinge post bracket or a full-length stiffener along the bottom rail. If the existing steel is rusted through in multiple spots, replacement may cost less than chasing welds, but we’ll show you both numbers before we touch anything. You decide. Call (877) 610-2993 for an honest assessment.
Brands We Service in Lucas
We stock parts and carry factory training for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means most Lucas repairs don’t wait on a parts order from Dallas or Houston. If your operator is a Linear or Viking unit, we likely have the board or gear set on the truck today. See all brands we service.
Pricing for Gate Repair in Lucas, TX
| Service | Typical range in Lucas |
|---|---|
| Hinge replacement (standard steel gate) | $180 - $320 |
| Hinge replacement (ornamental estate gate) | $180 - $450 |
| Post reset and concrete base repair | $340 - $740 |
| Post replacement with deeper footing | $350 - $900 |
| Gate realignment after soil shift | $160 - $280 |
| Operator board replacement (Viking, Linear) | $280 - $520 |
| Motor repair (residential swing/slide) | $180 - $420 |
| Motor installation (new) | $1,200 - $2,800 |
| Slide motor repair or replacement | $300 - $1,600 |
| Keypad replacement with reprogramming | $220 - $340 |
| Receiver board replacement | $185 - $310 |
| Phone entry system installation | $640 - $1,100 |
What pushes price up in Lucas is usually gate weight and soil condition, not ZIP code. Estate gates here are heavier and wider than subdivision aluminum, and Blackland Prairie clay often means post work before the gate itself can be fixed. The price we quote is the price you pay, agreed in writing before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Neighborhoods We Serve in Lucas
We work all over Lucas, from the large-lot acreage properties off FM 3286 to the neighborhoods along Country Club Road and the established streets around Lucas Road. Our typical response time for gate repair calls in Lucas is same-day or next-morning, depending on when you call and how far out the property sits.
- Parker Ranch
- Forest Creek
- Lucas Farms
- Properties along FM 3286
- Country Club Road area
Service Area - Cities Near Lucas
We serve Lucas, TX directly from our Dallas-Fort Worth office, with crews running local routes daily. If you’re just outside city limits, we also work in Allen, TX, Murphy, TX, Plano, TX, Fairview, TX, and McKinney, TX. Same pricing, same live answer on the phone, same 90-Day Done Right Promise.
Serving Lucas, TX - Our Local Coverage Area
Gatewood Fence & Gate crews serve Lucas and the communities around it; dispatch is coordinated from our Dallas-Fort Worth office. The map shows the Lucas coverage area; if your address is on it, we can help.
Also serving nearby: Lucas, TX, Allen, TX, Murphy, TX, Plano, TX, Fairview, TX, McKinney, TX.
FAQs About Gate Repair in Lucas
Most gate repairs in Lucas don’t require a permit, but if you’re replacing an operator or installing new access control on a gate that faces a county road, Collin County may want to see entrapment protection compliance. We know the local requirements and will tell you before we start if a permit applies to your specific job. Call (877) 610-2993 and we’ll walk you through it.
Yes, and we expect to. Many Lucas properties run two separate gate systems - an ornamental automatic entry at the street and a functional pipe-panel gate into the pasture. They’re mechanically different, but we diagnose and repair both on the same call. One trip charge covers both, and you’ll get one written quote for the whole property.
First, make sure the gate isn’t physically blocked by debris or a shifted post. Then check whether the operator has power at the pedestal - a tripped breaker or GFCI is more common than a dead motor. If the gate is making noise but not moving, note whether it tries to open or close; that tells us whether it’s a limit switch, a safety edge, or a mechanical bind. Don’t force the gate by hand if it’s connected to an operator - that can strip gears or damage the motor. Call (877) 610-2993 and describe what you’re seeing. We’ll tell you whether it’s safe to wait or whether we need to roll a truck now.
Call (877) 610-2993 for a free estimate on any gate repair, installation, or welding job in Lucas. A live person answers the phone 24 hours a day, and we’ll give you a straight price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lucas Customers Say
"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth