Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Murphy
Gate access control in Murphy usually means one of two things: a keypad or intercom at the driveway gate on a single home, or a shared entry system at one of the city’s HOA-governed community entrances. Most jobs in Murphy run $280 to $2,400 depending on the hardware, and we can typically get a tech to your property within one business day. Call (877) 610-2993 and you’ll get Hal or someone from his crew on the line, not a recording.
We’ve worked Murphy’s neighborhoods long enough to know the streets, the HOAs, and the way the gates on this clay soil misbehave. If you’re off Heritage Parkway, Maxwell Creek, or Skyline Drive, we already know your subdivision’s gate style before we pull up. Our Gate Access Control team handles keypads, remotes, phone entry, card readers, and video intercoms, and we stock parts in our Dallas-Fort Worth shop so we’re not waiting on a distributor while your gate sits open.
Why Gatewood Fence & Gate Is Murphy’s Preferred Gate Access Control Company
Hal Gatewood started this company in 2001 and his name is on the shop, the invoices, and the truck. That matters in Murphy, where a gate failing at a community entrance isn’t just an inconvenience. It’s a safety problem and an HOA compliance issue rolled into one. When we show up, the person who answers your questions is someone who’s been fixing gates for over two decades, not a rotating cast of subcontractors.
Murphy’s gate stock is aging in a very particular way. The subdivisions built between 2000 and 2015 used similar ornamental iron and powder-coated aluminum gates, similar openers, similar hardware. That means failures cluster. A 14-year-old Viking opener in Maxwell Creek fails the same way as the 14-year-old Viking three streets over. We’ve seen it enough that we bring the right parts on the first trip more often than not.
Calls are answered by a live person around the clock. No voicemail tree, no call center. If your gate won’t open at 10 p.m. and you can’t get your car out, you’ll talk to a human who can tell you what to try and get a tech scheduled. That’s how Hal has run it since the first day.
Our Gate Access Control Services in Murphy
Keypad Entry
A keypad at the driveway means no more handing remotes to guests, landscapers, or the teenager who keeps losing them. In Murphy’s HOA communities, we commonly replace weather-beaten keypads with hardwired or wireless units that hold 25+ codes. On a job off Heritage Parkway, our tech found the swing gate binding at the hinge post, not the panel. The post footing had shifted on the black clay after spring rains, pulling the gate operator’s travel arm out of range. We re-plumbed the post, re-seated the operator, and re-synced the keypad and safety photocell, then left the HOA manager with a photo log for architectural compliance. A keypad entry install in Murphy typically runs $280 to $550 depending on the unit and wiring.
Remote Control
Remotes die, get dropped in the driveway, or just stop pairing after a power surge. We program and replace remotes for all the major brands, including Viking, Ghost Controls, and DoorKing, and we stock common models so a Murphy homeowner isn’t waiting a week for a $40 part. If your remote works intermittently only in the morning or after rain, the problem may not be the remote at all. Loop detectors under Murphy driveways lose sensitivity when the clay shifts, so slide gates start late or not at all for resident remotes. Remote programming and replacement in Murphy runs $75 to $180 for most single-family gates.
Phone Entry
Phone entry systems let a visitor call your cell from the gate keypad and you buzz them in from anywhere. For gated communities in Murphy, these systems replace the old call-box directory that breaks and can’t be updated without HOA board approval every time a resident moves. We install and service GSM-based phone entry units that don’t need a landline, which suits Murphy’s newer subdivisions where nobody has a copper phone connection anymore. Budget $700 to $2,400 for a full phone entry system, with less for repairs.
Card Reader
Card readers make sense for HOA community entrances and for single driveways where multiple family members and staff need access. We install proximity readers, key fob systems, and long-range RFID that opens the gate as your car approaches. In Murphy, card readers on sliding gates get a hard life from the clay: the post shifts, the reader moves a quarter inch, and suddenly fobs only work at a specific angle. We set the post, remount the reader, and it stays put. Card reader installs in Murphy run $400 to $1,200 depending on the system.
Video Intercom
A video intercom at the gate means you see who’s there before you open anything. For Murphy’s HOA-heavy street grid, these get specified with finishes that match the community’s architectural standards. We install Wi-Fi and hardwired video intercoms, wire them to your phone, and make sure the camera actually shows the visitor’s face, not the sky or the neighbor’s mailbox. Video intercom systems for Murphy homes run $900 to $2,500 installed, with repairs and camera swaps costing less.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Murphy
We’re certified to service nine major gate brands, and in Murphy we see a lot of Viking, Ghost Controls, and DoorKing units on the original installs from the 2000s and early 2010s. That’s good news for you. It means we know the failure points on these specific models before we open the housing, and we stock the replacement boards, arms, and remotes Murphy homeowners actually need. If you’ve got a Viking opener that’s been doing the slow-and-tired thing for a year, we’ll know what you’re describing from the first sentence. Fast turnaround, parts already in the truck, no waiting on a distributor in a different time zone.
Common Gate Access Control Problems We See in Murphy Homes
- Post heave from black-clay shrink-swell. Murphy sits on Collin County’s expansive clay, which drinks spring rain and cracks through the summer. The post moves, the gate binds, and the opener trips its obstruction sensor. Your hardware is fine; the post just isn’t plumb anymore.
- Keypad failures after winter freezes. The February 2021 ice event and similar cold snaps crack solder joints and membrane switches in outdoor keypads. Intermittent button presses or a dead display after a hard freeze is a common Murphy call.
- Loop detectors losing sensitivity. When the clay shifts under the driveway, the detection loop moves and slide gates start late or not at all for a resident’s remote. The remote is transmitting fine. The loop isn’t listening.
- HOA architecture mismatches. A resident swaps a failed keypad for whatever unit was on sale, and now the finish or form factor doesn’t match the HOA’s gate standard. We match new hardware to the community’s existing style so you don’t get a letter from the management company.
Pricing for Gate Access Control in Murphy, TX
Here’s what you can expect in Murphy, straight up. Keypad entry replacement or new install: $280 to $550. Remote programming and replacement: $75 to $180. Card reader install: $400 to $1,200. Phone entry system: $700 to $2,400. Video intercom: $900 to $2,500. A service call to diagnose a gate access issue runs $95, and that’s applied to the repair if we do the work. Every quote is written, agreed to before work starts, and doesn’t change at the door. HOA community entrance work gets a separate walkthrough and written estimate because those systems involve multiple homes and sometimes the management company’s sign-off. We offer $40 off any repair over $200, no trip charge inside Collin County, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a number you can take to your HOA or just hold us to.
We Also Serve Cities Near Murphy
Our Gate Access Control in Murphy work takes us into the surrounding communities every week. If you’re in Sachse, Wylie, Lucas, or Plano and dealing with a gate that won’t open, a keypad that’s dead, or an HOA entry system that needs modernizing, call the same number. We run the same trucks, same techs, same straight pricing out to every one of those cities.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Murphy
Yes, in nearly every Murphy subdivision, anything that changes the exterior appearance of your gate needs architectural committee approval first. That includes the keypad, intercom, card reader, and any new mounting hardware. We provide spec sheets and finish samples to include with your application, and we’ll tell you which hardware matches your HOA’s standards before you buy. It saves you getting a violation letter later. Call (877) 610-2993 and we’ll walk through what your community requires.
Murphy’s expansive black-clay soil swells after spring rain and pushes your hinge post out of plumb. The post moves, the gate frame twists, and the opener’s travel arm pulls out of range, which makes the gate bind or stop halfway. The fix is re-plumbing the post and re-seating the operator, not replacing the opener. Call (877) 610-2993 and we’ll diagnose it, free estimate included.
We can, yes. Murphy’s tract-built subdivisions have consistent gate styles within each community, and we stock or order hardware that matches the finish, profile, and mounting style your HOA originally approved. We’ve worked Maxwell Creek, Heritage Parkway, Skyline Drive, and the surrounding subdivisions, so we know the look and can keep you compliant. A mismatch is how a small repair turns into a management company notice. Call (877) 610-2993 and we’ll confirm what’s approved for your street.
The keypad is probably fine. In Murphy, a gate that opens slowly or stops partway is usually a post that’s been shifted by the clay soil or an opener arm that’s out of travel range. The keypad is sending the signal; the gate just can’t complete the move. We check the post plumb first, then the opener, and only then the keypad if nothing else solves it. Call (877) 610-2993 and we’ll find the actual problem without selling you parts you don’t need.
Yes. Any automatic gate should have a functional safety photocell and a reversing mechanism, regardless of when it was built or what the original HOA required. It’s a liability issue for you and for anyone who uses the gate. We test the photocell and the force settings on every access control job in Murphy, and we’ll tell you if your gate would fail a current safety standard. Call (877) 610-2993 and we’ll check it while we’re out.
Call Gatewood Fence & Gate for Gate Access Control in Murphy
If your keypad is dead, your remote stopped working, or your HOA gate needs a system that actually reconciles with the clay soil under it, call (877) 610-2993. You’ll get a live person, an honest answer, and a written price before any work begins. The 90-Day Done Right Promise is on every invoice: if it’s not done right, we make it right. Hal Gatewood’s name is on the shop, and the people who answer the phone work for him. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, providing gate access control service across Murphy, TX since 2001.