Gate Repair in Mount Vernon - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Mount Vernon

A sagging iron gate on a Mount Vernon rowhouse isn’t a project to put off. It’s the only barrier between the street and your front door, and when the hinges fail or the post shifts, that barrier stops doing its job. Gatewood Fence & Gate repairs legacy and modern gates across Mount Vernon, from the South Side to Fleetwood, with a repair-first approach that keeps your original ironwork where it belongs: on your property. We answer the phone with a live person 24/7, and we quote the price before any work starts. Call (877) 610-2993 for a free estimate.

Why Gatewood Fence & Gate Is Mount Vernon’s Preferred Gate Repair Company

Hal Gatewood founded this company in 2001, and his name is still on the shop and on every invoice. That matters in Mount Vernon, where a lot of the gate work we do involves iron that was hung before Hal was born. We’re not a franchise crew passing through from another state. We load our trucks with weld-on hinge pins, flat-bar stock, and drop rods because we know what’s failing on these blocks. The same original hinges and latches that were installed in the 1920s through 1940s are now reaching the end of their service life, and our Gate Repair team stocks parts that match that legacy hardware.

Our Mount Vernon customers call us back because we fix the gate on-site instead of hauling it away or selling a replacement that isn’t needed. Every job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. We’re licensed and insured, and our crew is background-checked. When you call, you get a real person, not a voicemail tree. When we give you a price, that’s the price.

Our Gate Repair Services in Mount Vernon

Electric Gate Repair

Electric gate repair in Mount Vernon typically runs $180 to $480 depending on whether the issue is the motor, the control board, the safety sensors, or the wiring. On older automatic slide gates in the 10550 ZIP code, we commonly see obsolete control boards that have locked up or failed entirely. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we can often retrofit a modern control board to an existing operator without replacing the whole unit.

Automatic Gate Repair

Automatic gate repair in Mount Vernon usually costs between $200 and $600. The final number depends on whether we’re fixing alignment, replacing a limit switch, rewiring a photo eye, or rebuilding a gearbox. On the tight lots common across the South Side and Fleetwood, an automatic gate that won’t open or close reliably creates a real problem, since there’s often no room to park around it. We diagnose the issue on-site and tell you straight what it needs.

Hinge & Post Repair

Hinge and post repair is the work we do most often in Mount Vernon, especially on the pre-WWII ornamental iron gates throughout 10550 and 10552. A gate hangs on its hinges, and when those hinges seize, snap, or pull free of the post, the whole gate falls out of square. We cut out corroded hinge barrels, weld in new ones, and rebuild post footings that have shifted from decades of freeze-thaw cycling. A typical hinge repair in Mount Vernon runs $150 to $350 per hinge, including on-site fabrication when needed.

Gate Realignment

Gate realignment in Mount Vernon generally costs $120 to $280 for a standard swing gate. When a gate drags on the walkway or won’t latch, the cause is usually a shifted post or a worn hinge, not the gate panel itself. We square the gate to the post, reset hardware as needed, and check the latch so it actually catches. On attached rowhouses where the gate is the only thing between the street and the door, a gate that doesn’t close properly is a security gap, not an inconvenience.

Trusted Brands We Service in Mount Vernon

We’re certified to service nine major gate brands, including Linear, Viking, and Ghost Controls, along with LiftMaster, FAAC, BFT, DoorKing, Elite, and Mighty Mule. For Mount Vernon customers with older automatic systems, we keep common control boards and safety edge components on the truck so we can complete repairs in one visit instead of ordering parts and coming back. If your opener has been discontinued, we’ll tell you honestly whether a retrofit makes sense or whether a new operator is the smarter long-term spend.

Common Gate Repair Problems We See in Mount Vernon Homes

Here’s what we’re actually fixing on Mount Vernon blocks right now:

– Snapped or seized cast-iron hinge barrels on 1920s through 1940s ornamental gates in the South Side and Fleetwood. These hinges were cast before the war and many have outlived their service life by decades. When the barrel snaps, the gate hangs by a single point and needs immediate repair.

– Heaved and shifted hinge posts from Westchester’s freeze-thaw cycle. Temperatures cross the freezing mark repeatedly from November through March, which causes concrete footings to shift. A shifted post throws the gate out of square and stresses the latch until it fails.

– Corroded latches and drop rods on attached brick rowhouses. The road salt applied heavily on Mount Vernon’s dense street grid accelerates rust on gates close to the curb, especially on corner lots. A rusted latch that won’t engage leaves the gate swinging free.

– Failed control boards on older automatic operators. Many Mount Vernon slide gate openers were installed 15 to 25 years ago. The boards fail without warning. We can often retrofit a modern board to the existing operator for less than a full replacement.

Pricing for Gate Repair in Mount Vernon, NY

We Also Serve Cities Near Mount Vernon

Gatewood Fence & Gate covers all of Mount Vernon and the surrounding communities. If you’re in Pelham, Pelham Manor, Wakefield, or Woodlawn, we come to you too. Our Mount Vernon customers span the city, and we’re equally familiar with the gate hardware in these neighboring towns.

FAQs - Gate Repair in Mount Vernon

My 1930s iron swing gate in the South Side has its original hinges. Can you repair them or do I need a whole new gate?

Most 1920s and 1930s ornamental iron gates can be repaired without replacement. We cut out the seized or snapped hinge barrels, weld in new period-appropriate hinge pins, and rebuild the post footing if it has shifted. Call (877) 610-2993 and we’ll assess your gate on-site.

The gate post on my Fleetwood rowhouse has shifted over winter and now the gate drags on the walkway. Is the post ruined?

Usually not. A shifted post is often the result of freeze-thaw heaving, and we can reset it with a concrete collar and realign the gate to it. The post is only ruined if the base has rusted through or the concrete is completely fractured. Call (877) 610-2993 for an honest look.

Do you fix the old original keyed rim locks on pedestrian iron gates from the 1940s?

Yes. Those old rim locks are still serviceable in most cases. We clean them, replace worn springs and internal levers, and adjust the strike plate so the latch actually engages. If the lock body has rusted through, we can source a period-appropriate replacement. Call (877) 610-2993.

My automatic slide gate opener on my South Side property is old and the control board has failed. Can you retrofit a modern board to the existing operator?

In most cases, yes. We stock control boards compatible with older Linear, Viking, Ghost Controls, and other major operators, and we can install one without replacing the entire operator. We’ll quote the retrofit before any work begins. Call (877) 610-2993.

The iron gate on my attached rowhouse on South 5th Avenue has rusted through near the bottom hinge. Can you repair the rust or does it need replacement?

If the rust has eaten through the gate frame itself, the structural repair may cost more than replacing the gate panel. We can often cut out the rotted section, weld in matching flat-bar stock, and repaint the repair so it blends. If the frame is too far gone, we’ll tell you straight and quote a replacement. Call (877) 610-2993 for a free assessment.

Call Gatewood Fence & Gate for Gate Repair in Mount Vernon

If your gate is sagging, dragging, seized, or won’t latch, call (877) 610-2993. A live person answers, day or night. We’ll set a time, show up when we say we will, and give you the price before any work starts. Hal’s name is on the shop, and the 90-Day Done Right Promise is on every job. That’s how we’ve done it since 2001, and that’s how we do it in Mount Vernon.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Vernon since 2001.