Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mount Vernon
A new gate installation in Mount Vernon typically runs $1,800 to $7,400 for a driveway gate and $900 to $3,800 for a pedestrian gate, depending on the opening size, the gate style, and whether automation is included. Most jobs on the South Side and in Fleetwood are scheduled within a week, and we quote the price in writing before any steel is cut. If you’re on a pre-war brick block with a gate that’s sagging or just plain worn out, call (877) 610-2993 and Hal will tell you straight whether it can be restored or needs to be replaced.
Mount Vernon is not a clean-slate suburb. The streets are tight, the lot lines are old, and a lot of the ironwork on these attached homes dates back to the 1920s and 1930s. That changes how a gate gets installed here. We plan around shared driveways, narrow walkways, and neighbors who have a legal easement that a swing gate arc cannot cross. Our Gate Installation crew works these blocks the way they were built, not the way a catalog says they should be. You get a gate that opens clean, closes square, and doesn’t turn your neighbor’s morning exit into a geometry problem.
Why Gatewood Fence & Gate Is Mount Vernon’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is on every invoice and on the building itself. That matters in a city like Mount Vernon, where people still ask each other who did the iron on Chestnut Street or who fixed the gate on Lorraine. The answer, more often than not, is the same crew. We publish our address and license number. We are not a call center, and nobody is ever going to hand you a phone-tree menu. A live person answers every call, all day, every day, including 2 a.m. when a security gate on a corner lot near the Bronx line will not latch after a snowplow nicked the post.
Our work in Mount Vernon leans heavily on the old housing stock that shapes this city. We know the difference between a Fleetwood semi-attached with a 1930s pedestrian gate and a South Side rowhouse where the driveway easement belongs to two addresses. That knowledge does not come from a manual. It comes from welding on Eastchester corners, from setting posts on East Lincoln Avenue, from years of working with the same original hardware that is failing block by block across 10550. When a Mount Vernon homeowner asks whether a gate can be saved, they are asking someone who has already saved a dozen of the same gate on the same street.
Every job we do in Mount Vernon, New York carries the 90-Day Done Right Promise in writing. If something isn’t right, Hal comes back. No runaround, no “that’s not covered.” The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Installation Services in Mount Vernon
Driveway Gate Installation
Driveway gates in Mount Vernon rarely have the luxury of a wide, flat approach. On blocks off South Columbus and West 4th, the driveway is often a shared cut between two rowhouses, and the gate has to hold the property line without stealing a single inch of it. A typical driveway gate installation here runs $2,400 to $7,400 for steel or aluminum, with automation adding $1,100 to $2,800 depending on the operator brand and safety components. We measure in place, we check the neighbor’s easement, and we tell you up front whether a slide gate will serve the lot better than a swing gate.
Pedestrian Gate Installation
Pedestrian gates on Mount Vernon’s pre-war attached homes are often original ornamental iron with real character and real fatigue. When the hinge post has heaved from decades of freeze-thaw and the drop rod no longer lines up, the smart move is sometimes not a new gate but a restored frame with new hardware and a period-appropriate latch. A new pedestrian gate install here typically runs $900 to $3,800. If the existing iron can be salvaged and re-hung on a new post footing, the cost drops and the street keeps its original look. We are one of the few crews in Mount Vernon that fabricates on site rather than ordering a pre-made panel that never quite matches the 1928 iron next door.
Sliding Gate Installation
Sliding gates are the workhorse answer for Mount Vernon lots where a swing gate’s arc would jut into a neighbor’s walkway or a public sidewalk. On shared driveways across the South Side, a slide gate rides on a track and leans back against the building line, leaving the easement open and the neighbor’s access untouched. Sliding gate installations in Mount Vernon generally run $2,800 to $7,200 installed, with cantilever systems at the higher end when the ground under the track needs heavy prep. This is the gate style we recommend most often on attached-home blocks, because it respects the tight geometry that Mount Vernon’s housing stock enforces.
Double Gate Installation
A double gate, often called a bi-parting gate, splits in the middle and retracts to both sides. In Mount Vernon, it’s a common sight on the wider corner lots near Wakefield and on small apartment buildings that need a wider vehicle opening. Double gate installation here typically starts around $3,200 and can reach $8,400 for automated steel panels with full entrapment protection. The tricky part on Mount Vernon’s uneven curb lines is keeping both leaves plumb when the street itself has settled, and that is exactly the kind of work Hal’s crew has been doing since 2001.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mount Vernon
We carry parts and service for the gate operators Mount Vernon homeowners and building owners actually use. That includes Viking, Ghost Controls, and DoorKing, three brands that show up consistently on the residential gates in this area, along with LiftMaster and FAAC on the higher-traffic commercial entrances near Gramatan Avenue. Because we stock common boards, remotes, and safety sensors locally, a same-week operator swap on a Mount Vernon driveway gate does not mean waiting on a freight truck from Georgia. If your gate is automated, we can tie the new operator into existing loops and photocells, and we will not sell you a new motor just because the old one needed a capacitor.
Common Gate Installation Problems We See in Mount Vernon Homes
- Shared driveway easements that forbid a swing gate. On many South Side blocks, the driveway belongs to two homes, and the gate’s swing arc would cross into the neighbor’s half. We install slide gates or reconstruct the hinge geometry to work within the true property line.
- Heaved posts from Mount Vernon’s freeze-thaw cycle. Westchester’s winters push water into concrete, freeze it, and shift the footing sideways. Posts near the curb on corner lots get the worst of it, and the gate starts dragging on the latch side by March.
- Original 1920s-1940s ornamental iron with no modern hardware. The gates still look beautiful, but the hinge barrels are split, the drop rods are bent, and there is no operator or safety edge for a family that now wants automation. We restore and retrofit rather than replace.
- Legacy gates with no entrapment protection. Older automatic gates in Mount Vernon were often installed before current UL 325 safety standards. When we touch an installation, we add the required photocells and reversing edges so the gate meets code and doesn’t hurt a kid or a delivery driver.
Pricing for Gate Installation in Mount Vernon, NY
You should know what a gate costs before you ever schedule a measure. In Mount Vernon, a manual pedestrian gate runs $900 to $3,800 installed. A manual driveway gate runs $2,400 to $5,200. Automated driveway gates with the operator, safety loops, and battery backup run $4,300 to $9,900. The spread comes down to the gate length, the material, whether we need to replace the posts or just the leaf, and whether the operator is a basic Viking unit or a higher-cycle DoorKing. We give the price in writing before work begins, and that is the price you pay. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate. You will not be talking to a call center three states away. You will be talking to someone who knows Mount Vernon.
We Also Serve Cities Near Mount Vernon
Our Gate Installation in Mount Vernon crews also make the short run to Pelham, Pelham Manor, Wakefield, and Woodlawn. The housing stock shifts a little in those towns, but the freeze-thaw and shared-line problems don’t care about the border. If you are just over the line and wondering whether we will come, the answer is yes, usually the same week.
Serving Mount Vernon, NY - Our Local Coverage Area
We’re based in the Mount Vernon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Mount Vernon
Yes, and in most Mount Vernon shared-drive situations a slide gate is the only legal option, because a swing gate’s arc would cross the neighbor’s easement and violate the right-of-way. A slide gate travels on a track along one side of the opening and never enters the neighbor’s half of the driveway. The cost for a slide gate on a shared lot here typically runs $2,800 to $7,200 installed. We confirm the property line and easement before we design anything, so neither you nor your neighbor ends up with a gate that blocks a driveway that is not fully yours to block. Call (877) 610-2993 and we will measure the opening and tell you exactly what fits.
In most cases they can be restored, and we are one of the only Mount Vernon crews set up to do it. The ornamental gate itself often has another fifty years in it, and what actually failed is the hinge post, the hinge barrels, or the drop rod. We pull the gate, weld on new hinge pins, set a new footing in the existing opening, and re-hang the original iron with a period-appropriate latch. That costs between $700 and $2,800, far less than a new custom replication. If the gate itself has rotted through at the base or the frame is twisted beyond straightening, then replacement makes sense, and we will tell you so plainly instead of selling you work you don’t need.
No, you and your neighbors will keep using the driveway and the sidewalk while we work. On Mount Vernon’s tight attached-home blocks, we stage the truck to leave the cut clear, and when a post has to be excavated we brace and shift the gate rather than blocking the shared walkway. If we need to close a lane for a short lift, we coordinate it for the fewest minutes possible, not the whole afternoon. The goal is to install the gate without starting a block feud, and that starts with keeping everyone’s car moving.
Wait, no, this is a question with a specific answer, and it comes down to density and curb proximity. Mount Vernon’s street grid is tighter than much of Yonkers, with more attached homes and more gates set within a few feet of the curb. That means more salt spray, more standing meltwater at the post base, and more freeze-thaw cycles concentrated in the concrete collar. The water gets in, freezes, pushes the footing, thaws, and repeats, and the cycle works the post loose. We dig the old footing out, set the post deeper with proper drainage, and backfill with compacted stone rather than pouring another concrete bowl that will crack the same way in three winters.
Yes. Under the UL 325 standard that New York State enforces, any automated gate on a residential property in Mount Vernon must have two independent entrapment protection methods: photocells across the gate opening plus a reversing edge or an inherent safety system in the operator. We install those on every automatic gate we touch, and we wire the operator so the gate reverses immediately if it contacts a person, a car, or a kid’s bike. Leaving an automatic gate without photocells is not a corner anyone should cut, and we don’t cut it. Call (877) 610-2993 if you have an older operator that is missing its safety edge and we will get it code-compliant, usually in one visit.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mount Vernon since 2001.
Call (877) 610-2993 for a free estimate on Gate Installation in Mount Vernon. A live person answers, not a voicemail, not a robot. We’ll schedule the measure, quote the price in writing, and install the gate so it opens clean and closes square for the next 30 years.