Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Memphis, CA | Gatewood Fence & Gate
We’re Gatewood Fence & Gate, and we repair Ghost Controls openers across Memphis, TN – independent, not factory-affiliated, which means we answer to you, not a corporate warranty line. If your Ghost Controls gate is dragging, whining, stopping halfway, or refusing to latch, call (877) 610-2993 and you’ll get a live person, not a voicemail. What makes our Ghost Controls work different here comes down to one thing: we’ve spent 29 years watching how Shelby County clay moves under Memphis gates, and we fix the ground problem, not just the opener. Hal Gatewood’s name is on the shop, his address is published, and he’s been at it since 2001.
Why Memphis Residents Choose Us for Ghost Controls Service
Plenty of gate companies can swap a control board. Few know why a Ghost Controls TDS2 that worked fine in March starts tripping its stops by August on a Midtown Victorian. We do, because we’ve been underneath those gates. Hal Gatewood grew up in the San Fernando Valley and picked up his fundamentals at Los Angeles Trade-Technical College, then spent years in the field learning what a classroom never covers – like how a gate that swung clean in February drags when the clay finally dries out. We service nine major gate brands including Ghost Controls, and we’re certified on every one. We keep OEM Ghost Controls arms, boards, and remotes on hand for the common failures, and when a part’s discontinued we don’t just shrug – we fit a quality aftermarket linear actuator with a custom mounting plate and stand behind it. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround. No fine print.
We also answer our own phone. Around the clock. The person who picks up knows gates, not a script. And the person who shows up is either Hal or somebody he’s trained, background-checked, and uniformed. You can check our license number anytime – it’s published, same as our address. If you’d rather look us in the eye, drive to the shop and we’ll show you exactly what’s wrong with your opener.
Common Ghost Controls Gate Repair Problems We Solve in Memphis
- False stops and over-travel from post heave. Memphis sits on expansive clay that swells with spring rain and shrinks in August heat. When the post moves, the limit cams on a Ghost Controls opener move with it, so the gate stops short or overshoots. We reset the post, not just the stops.
- Squealing or struggling arms from river moisture corrosion. The Mississippi River keeps Memphis humidity high year-round, and the pivot and clevis pins on a Ghost Controls arm rust faster here than in drier cities. That corrosion loads the motor until it stalls. We replace the pins with OEM and re-lubricate properly.
- Cracked control box seals and seized manual releases on TDS2 models after ice storms. Memphis gets ice, not snow. Freeze-thaw cycles crack plastic seals and corrode the key release inside. A TDS2 that won’t disengage manually in an emergency is a real problem, and we see it every winter.
- Rust bloom on AXLE decorative arm brackets, especially on old Midtown wrought iron. Those century-old gates were built before anyone thought about galvanic corrosion. The uncoated iron and the actuator bracket create a rust cell that looks terrible and eventually binds. We weld in new material where it’s sound and replace what isn’t.
- Remote and receiver sync loss after power flickers. Memphis thunderstorms knock power out regularly, and Ghost Controls boards occasionally lose their pairing codes. Usually it’s a reprogram, not a replace. We’ll tell you which one before we touch it.
Ghost Controls Service in Memphis: What Local Conditions Mean for Your Equipment
Most people don’t realize Memphis sits on the New Madrid Seismic Zone, and the minor tremors that ripple through here – small enough to ignore, frequent enough to matter – gradually shift gate posts on clay soil. A Ghost Controls opener in Midtown will drift out of sensor alignment more often than the same unit in Nashville or Little Rock because the ground under it is never fully still. We’ve seen openers that passed every bench test but failed in the driveway because the post had walked a quarter-inch left over two years. That’s why our Ghost Controls service starts with the post and the hinge, not the motor. Fix the panel without the post and you’ll fix it twice. Memphis Gate Repair homeowners in Midtown, Frayser, and Whitehaven are dealing with this exact cycle – the gate didn’t break, the ground moved.
Ghost Controls Models & Products We Service in Memphis
We work on the full residential Ghost Controls line: TSS1 and TDS2 swing-arm openers, the AXLE series, and ABBT2 battery backup kits. We’ve also retrofitted Ghost Controls openers onto plenty of original Midtown wrought iron gates, which requires careful measuring and often custom bracket fabrication – we weld on site, so the gate stays in your driveway. When parts are needed we use Ghost Controls OEM arms, boards, and remotes whenever they’re available, because that keeps your warranty intact and avoids re-pairing headaches. For older or discontinued motors where OEM is gone, we machine or weld custom mounts for quality aftermarket actuators. If your gearbox has failed and the arm is rusted through, we’ll tell you straight: replacement is cheaper than a cascade of patch repairs. We’re not here to sell you a new opener you don’t need. We’re here to fix the one you have if it makes sense.
Ghost Controls Service Pricing in Memphis
Straightforward numbers, because that’s how we operate. A Ghost Controls service call in Memphis typically starts around $125-$175 for diagnosis and minor adjustments. Replacing an OEM control board usually runs $225-$375 installed. A full opener replacement, including the arm, hardware, and programming, lands between $600 and $1,100 depending on your gate’s weight and whether we need custom brackets. Weld repair on rusted wrought iron is quoted by the job after we see the damage. Every estimate is free, it’s quoted and agreed before any work starts, and there’s no trip charge inside the county. We also offer $40 off any repair over $200, a free second opinion on any written estimate you’ve gotten, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote – estimates are free, and the price you hear is the price you pay.
Serving Memphis, FL - Our Local Coverage Area
We’re based in the Memphis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Memphis
Because the clay under your post has shrunk in the dry heat and the post has shifted, pulling the limit cams out of position. The opener thinks it’s reached the end of travel. We reset the post in a deeper concrete collar and reprogram the stops – two fixes, but they have to happen together. Call (877) 610-2993 and we’ll take a look.
Usually, yes. The whine is almost always corroded pivot or clevis pins from Memphis’s river humidity putting drag on the motor. We replace the pins with OEM units and re-lubricate the travel path. If the gearbox itself has failed, we’ll tell you and quote replacement straight – but we don’t sell a replacement if the arm just needs pins.
Probably not. Memphis ice storms cause freeze-thaw cycles that crack concrete around posts, and the post moves just enough that the latch alignment dies. The motor’s usually fine. We realign the post, repair the concrete collar, and square the gate to the latch – then the opener does its job again. Call us before you buy a motor.
Yes, and we’ve done it many times on Midtown’s Victorians and Craftsman-era homes as part of our Gate Installation in Memphis. The trick is measuring the gate’s actual weight and swing arc, then fabricating brackets that fit the iron cleanly. We weld on site, so nothing leaves your driveway. A free measure and written price is where we start.
Once a year. Between the clay movement, the river humidity, and the ice storms, Memphis is harder on gate hardware than almost anywhere in the region. An annual check catches post drift and corrosion before they wreck the motor. Call (877) 610-2993 to schedule – a live person answers.
Service Areas Near Memphis
We regularly run Ghost Controls service out from Memphis into the surrounding counties. If you’re in Memphis service area or nearby, chances are we’ve been down your road. We also support our Ghost Controls sales & service customers across the region. And if you’re comparing notes, we have crews handling Ghost Controls service in Dallas and Ghost Controls service in Austin too – same standards, same promise.
Book Your Ghost Controls Service in Memphis Today
Your gate isn’t going to fix itself, and the clay under it isn’t going to hold still. Call (877) 610-2993 right now. A live person answers, and we’ll get somebody out to your Memphis home with the right parts and a straight answer. Call me directly. If I don’t pick up, I’ll call you back – not a call center, just me.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Memphis since 2001.