Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Medway, MA
Gate repair in Medway runs $145 to $680 for most hinge, post, latch, and operator work, with the majority of jobs finished in a single visit. What makes Medway different is the soil: clay-bearing ground plus four-foot frost penetration means gate posts heave every few winters, and gates on low-lying lots near the Charles River watershed bind and drag each spring. Call (877) 610-2993 and you’ll get a live person who knows exactly what your gate is up against out here.
Why Medway Homes Are Different
Medway’s housing stock is mostly colonial and cape-style single-family homes on half-acre to multi-acre lots, built during the town’s big suburban expansion from the late 1980s through the 2000s. That means a large share of the ornamental iron and chain-link driveway gates in town are now 20 to 40 years old, hitting their first major service window all at once. The older homes near the historic town center have a different profile: early-to-mid 20th century wrought iron or timber gate hardware that has often never been replaced.
The bigger factor is what’s under the gate. Medway sits in the upper Charles River watershed, so low-lying lots hold groundwater through March and April. Norfolk County clay absorbs that moisture, freezes to a depth of up to four feet in winter, and expands just enough to shove a gate post out of plumb. We see the same addresses year after year, and the fix is never just the latch; it’s the footing underneath.
Gate Repair in Medway
Gate repair in Medway usually costs between $145 and $420 for hinge, post, and latch work, with electric gate and motor repairs running $280 to $680 depending on the parts involved. Most jobs take one to three hours on site. The single most common call we get in Medway is post heave: the freeze-thaw cycle pushes a hinge post up and sideways, the gate starts dragging, and the latch won’t catch. We reset the post, weld the hinge assembly square, and the gate swings like it should. This is our primary work in Medway, and you can read more about how we approach it on our Gate Repair page.
Electric Gate Repair
Electric gate repair in Medway typically runs $280 to $680, depending on whether the failure is in the control board, safety edges, transformer, or the wiring run between the operator and the gate. Homes along the Charles River corridor deal with ground saturation every spring, and that moisture finds its way into underground conduit far more often than people expect. Before we swap any part, we trace the full circuit and show you exactly what failed and why.
Automatic Gate Repair
Automatic gate repair in Medway usually costs $260 to $640, with most jobs completed the same day we arrive. Freeze-thaw cycles are hard on automatic systems: limit switches drift, chains stretch, and solder joints inside the operator box contract and expand until one lets go. When we work on an automatic gate in Medway, we check the full system, not just the symptom. A gate that opens but won’t close is a safety problem, not a minor annoyance.
Hinge & Post Repair
Hinge and post repair in Medway runs $145 to $380 in most cases, and this is the work we do more than anything else in town. The soil is the culprit: clay-bearing ground plus Massachusetts frost penetration up to four feet means posts move a little every winter, and after 20 or 30 winters, a little becomes a lot. We weld on site, which means we cut out the rotted base, weld in a new section, and keep your gate swinging true without hauling it off to a shop.
Gate Realignment
Gate realignment in Medway usually costs $160 to $340, and for properties near the upper Charles River watershed, this is the repair that defines the town. Low-lying lots soften every spring, posts settle unevenly, and a gate that closed perfectly in November starts dragging or binding by April. We’ll set the posts, re-bed them properly, and show you what to watch for when the thaw comes again.
How fast can you get to my home in Medway?
Most Medway gate repair calls are reached the same day you call, with many finished that afternoon. Scheduling is coordinated from our Boston area office, with local crew serving Medway directly. Emergency service is available 24/7 for automatic gates stuck open or closed. Call (877) 610-2993 and you’ll get a real arrival window, not a four-hour range.
Do you service all neighborhoods in Medway?
Yes, we cover the entire 02053 zip code, from the properties near Choate Park and Medway High School to the neighborhoods off Holliston Street, Village Street, and Main Street. If you’re within Medway, you’re within our service area, and there’s no trip charge inside the county. Call (877) 610-2993 for a same-day or next-morning window.
Gate Installation in Medway
Gate installation in Medway usually runs $1,800 to $6,500 for a complete driveway gate with operator, and most jobs are quoted within 48 hours of the first call. We measure on site, price it in writing, and that’s the number we stand behind. The footing depth is where Medway separates a gate that lasts from one that heaves in three years: we core to four feet and use a larger diameter pour than the original post required. Learn more about how we handle full installs on our Gate Installation page.
Driveway Gate Installation
A new driveway gate in Medway typically costs $2,400 to $6,500 depending on width, material, and whether you’re adding automation. Most homes here have driveway entrances between 10 and 16 feet wide. We build and install single and double gates, weld the frame to spec, and set posts deep enough to actually stay straight in Norfolk County clay.
Pedestrian Gate Installation
Pedestrian gates in Medway run $600 to $1,800 installed, with the lower end for a standard 4-foot vinyl or chain-link gate and the higher end for ornamental iron with a welded steel frame and self-closing hardware. If you’re near the historic town center dealing with older post hardware that’s never been replaced, expect either new posts or post sleeves in the quote. We don’t hang a new gate on a 40-year-old post and call it done.
Sliding Gate Installation
Sliding gates make sense on Medway lots where the driveway slopes toward the road, which is common on the colonial and cape-style properties built during the town’s late-80s and 90s expansion. Figure on $3,000 to $7,000 with a motor and tracked operator. We set the track base above grade so spring melt doesn’t leave the gate sitting in standing water.
Why does my gate bind every spring even though it was installed correctly years ago?
It’s the clay. Medway sits in the upper Charles River watershed, and Norfolk County’s clay-bearing soils expand when saturated each spring, heaving gate posts up just enough to knock the latch and drag the frame. A gate set on two-foot footings will do this every year regardless of who installed it. The fix is new footings at four feet with a larger diameter pour, and we quote that before any digging starts.
Can a chain-link gate from the 1980s be retrofitted with a modern opener and keypad?
Yes, as long as the hinge post and gate frame are structurally sound. We’re certified to service Ghost Controls, Viking, Elite, and DoorKing, all of which make openers that work well on older chain-link gates. We’ll check post depth and condition first, then add a keypad, safety edges, and photo eyes. Call (877) 610-2993 and we’ll tell you straight whether the old gate is worth the retrofit.
Gate Motor & Opener in Medway
A dead gate motor in Medway usually isn’t a simple motor problem. The town’s late-1980s-to-2000s gate stock is aging into its first major opener service window at the same time Norfolk County clay and four-foot frost depths cause chronic post heave. That means operators here often fail from frame binding long before the motor itself wears out. We diagnose the whole system, not just the symptom. More detail on how we work is on our Gate Motor & Opener page.
Motor Installation
A new motor on a Medway gate starts with the post, not the operator. If the post is heaving or out of plumb, bolting a new motor onto a bad frame just burns through the motor faster. We check footing depth, alignment, and hinge wear before recommending an install. A typical motor installation in Medway runs $900 to $2,400 depending on operator type, gate weight, and whether we’re adding new safety edges.
Motor Repair
Most Medway motor repairs are frame problems in disguise. A swing gate that heaves three-quarters of an inch can trip photocells, strip rack-and-pinion gears, and eventually cook the motor. We diagnose before replacing parts. Minor motor repairs like limit-switch replacements or capacitor swaps typically run $180 to $450 in Medway; gear and board replacements run $350 to $800 depending on the operator model.
Linear Motor Service
Linear motors are common on Medway slide gates, especially on multi-acre lots off Route 109. The failure pattern is predictable: spring saturation from the upper Charles River watershed softens soil around the posts, the frame binds, and the linear actuator strains until it strips a gear or burns a board. We realign the post footing and re-tune the operator limits together, so you’re not paying for a new motor every few seasons.
Does Medway’s winter frost affect my gate motor’s safety edge sensor?
Yes. Frost penetration up to four feet shifts gate posts and frames, which misaligns photo eyes and safety edges. The sensor isn’t faulty; the gate moved. We realign the frame and re-mount the sensors so they sit correctly, then re-tune the motor limits. A new sensor won’t fix a heaving post. Call (877) 610-2993 for a free estimate on the real fix.
My gate post keeps heaving near the Charles River corridor. Will a new motor stop it?
No. A new motor on a heaving post will fail the same way the old one did, because the bind never gets resolved. The fix is resetting the post footing below frost depth, often with a larger concrete footer, then realigning the gate and re-tuning the motor. We see this exact pattern on the same addresses year after year, and we do the post work and the motor work in the same visit.
Gate Access Control in Medway
Gate access control in Medway is about more than convenience; it’s about controlling who gets onto a property where the driveway is often long enough that you can’t see the gate from the house. We install and service keypads, intercoms, and vehicle loop detectors on gates across the 02053 zip code, including retrofit work on older operators that were installed long before modern entrapment protection standards existed. Most access control jobs in Medway run $500 to $1,800 depending on the hardware and how much existing wiring we can reuse. You can read more on our Gate Access Control page.
Keypad Entry Systems
A keypad entry system on a Medway gate typically runs $500 to $1,200 installed, depending on whether we’re adding it to an existing operator or wiring it into a new one. We mount the keypad where it’s reachable from the driver’s window, seal it against New England weather, and program your codes on the spot. If your operator is older, we’ll tell you honestly whether it can accept the keypad before you spend anything.
Vehicle Loop Detectors
Loop detectors prevent a gate from closing on a car, and on Medway properties with heavy clay soil and four-foot frost, the loop wire in the driveway takes more stress than most people realize. We cut, install, and seal loop detectors so they survive freeze-thaw cycles without cracking. A loop detector repair or replacement in Medway typically runs $400 to $900 including the controller where needed.
Can you add a keypad entry or safety photocell to an old Medway gate?
Yes. Most legacy operators on Medway gates can accept aftermarket keypads and photo eyes, even when the original control board didn’t have those inputs. We wire the keypad into the existing operator, mount it at the driveway, and program your codes. Safety photocells get mounted on the posts and wired to stop the gate if anything breaks the beam. Call (877) 610-2993 with your operator model and we’ll give you a straight number.
Do Medway properties with gate access control need a permit?
Most gate access control work in Medway does not require a separate permit beyond what applies to the gate itself, but we always check current town requirements before we start. If a permit is needed, we handle the paperwork and build the inspection into the schedule. We’ll tell you upfront exactly what’s required for your property, in writing.
Gate Parts & Welding in Medway
Gate parts and welding in Medway usually come down to two things: a hinge post that’s moved in the clay, or a weld that finally let go after twenty winters. We fix both on site, in your driveway. The ground under a gate post in this town isn’t stable: clay holds water, frost goes down four feet, and every winter the footing heaves a little. When a weld cracks or a hinge wallows out, the fix is repair, not replacement. Learn more on our Gate Parts & Welding page.
Hinge Replacement
Hinges on Medway gates take a beating. Repeated freeze-thaw cycles work the metal, and once a hinge pin wallows out, the gate drops just enough to scrape the latch side. A typical hinge replacement in Medway runs $220 to $460, depending on the gate’s weight and whether we need to weld reinforcement plates behind the new hardware. We don’t swap hinges and call it a day; if the post shifted, we deal with the post, otherwise you’ll fix that hinge twice.
Post Replacement
This is the defining job around Medway. We dig out the old footer, reset the post in a deeper pour, and weld the hinge assembly back on with the gate plumb and square. A full hinge post replacement in Medway typically runs $400 to $800. It’s the repair that actually ends the recurring sag instead of treating it for one more season.
Rail Repair
Top and bottom rails on ornamental iron gates crack from decades of cold contraction and ground movement. When the frame twists, the welds at the rail-to-picket joints are the first to fail. We repair those on site in Medway with proper MIG welds, ground out and beveled, not the bird-dropping beads you see from a guy with a buzz box. Rail repair work lands between $180 and $400 in this market.
Can you weld a cracked ornamental iron gate on site in Medway?
Yes, in almost every case. Our welding is done in your driveway, not in a shop. We bring the gear, grind out the old crack, bevel the edges, and lay a proper weld with proper penetration. For 20-to-40-year-old ornamental gates in Medway, the crack is usually at a frame joint or hinge plate, and on-site repair saves the cost and hassle of removing a gate that weighs several hundred pounds.
Why does my Medway gate need post realignment every spring?
Because Norfolk County clay holds water and Massachusetts frost goes four feet deep. The ground around your hinge post absorbs moisture all fall, freezes solid in January, and expands. That expansion shoves the post a fraction of an inch. After a few seasons, the post has walked far enough that your latch won’t catch. The permanent fix is digging a deeper footer and resetting the post. Call (877) 610-2993 for a quote.
Brands We Service in Medway
We’re certified to service Linear, Viking, Ghost Controls, and DoorKing operators, along with several other major brands. We keep common replacement boards and gears stocked locally so Medway repair jobs don’t stall waiting on a part. See our full brands coverage for details.
Pricing for Gate Repair in Medway, MA
| Service | Typical range in Medway |
|---|---|
| Hinge replacement and re-welding | $145 - $280 |
| Post reset or reinforcement | $180 - $380 |
| Gate realignment and latch adjustment | $160 - $340 |
| Electric operator repair | $280 - $680 |
| Full automatic gate troubleshooting with safety edges | $340 - $720 |
| Driveway gate installation | $2,400 - $6,500 |
| Pedestrian gate installation | $600 - $1,800 |
| Sliding gate installation with motor | $3,000 - $7,000 |
| Motor installation | $900 - $2,400 |
| Minor motor repair | $180 - $450 |
| Hinge post replacement | $400 - $800 |
| Rail repair and re-welding | $180 - $400 |
What pushes a Medway price toward the higher end is usually footing depth and soil condition: a post set in clay that’s been heaving for twenty years takes more work to reset properly than a clean install on fresh ground. Every price is quoted and agreed before any work starts, and the number on your quote is the number on the invoice.
Neighborhoods We Serve in Medway
We run jobs across the entire 02053 zip code, and most repair calls are reached the same day or next morning. The neighborhoods below are all regular stops for us:
- Cedar Hill area
- Winthrop Street corridor
- Near Medway High School
- Village Street residential stretch
- Holliston Street bordering neighborhoods
Service Area - Cities Near Medway
Medway is our core service area, and we also cover the surrounding Norfolk County towns where the same clay soil and frost conditions apply. If you’re in Medway, Millis, Holliston, Norfolk, Medfield, or Ashland, you’re within our service area. Call (877) 610-2993 and we’ll get you on the schedule.
Serving Medway, MA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Medway and the communities around it; dispatch is coordinated from our Boston office. The map shows the Medway coverage area; if your address is on it, we can help.
Also serving nearby: Medway, MA, Millis, MA, Holliston, MA, Norfolk, MA, Medfield, MA, Ashland, MA.
FAQs About Gate Repair in Medway
Most Medway repair calls are reached the same day you call, with many jobs completed that afternoon. We schedule from our Boston area office with local crew serving Medway directly, so you get a real arrival window rather than a four-hour range. Emergency service is available 24/7 for automatic gates stuck open or closed. Call (877) 610-2993 and a live person picks up.
Most gate repairs and replacements in Medway do not require a permit, but new driveway gate installations with electrical work sometimes do. We check current town requirements before we start, and if a permit is needed, we handle the paperwork and schedule the inspection. You’ll know exactly what’s required before any work begins.
Medway sits in the upper Charles River watershed, and low-lying lots hold groundwater through March and April. Norfolk County clay absorbs that moisture and expands, heaving gate posts just enough to bind latches and drag frames. The same addresses need post realignment every few seasons; it’s the soil, not the gate. Call (877) 610-2993 and we’ll fix the footing, not just the symptom.
Call (877) 610-2993 for a free estimate on any gate repair, installation, motor, access control, or welding work in Medway. A live person answers, the price is quoted before we start, and the 90-Day Done Right Promise comes in writing on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Medway Customers Say
"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim