Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Medway
If your Medway gate is sagging, binding, or the operator quit after a hard winter, the fix usually comes down to hinge posts, welded joints, and the parts between them. Gatewood Fence & Gate handles gate parts and welding right in your driveway, so your gate doesn’t leave the property. Hal Gatewood has been fixing gates since 2001, and he still answers the phone. For Gate Installation - Medway, call (877) 610-2993 and you’ll get a live person, day or night.
Gate repair in Medway isn’t a mystery. The town sits in Norfolk County, where clay soil and a four-foot frost line push gate posts out of plumb every few springs. That means hinge-post realignment, welded rail repair, and operator retrofits are the recurring jobs on Medway driveways, not one-time oddities. We know exactly what’s failing before we pull into your yard.
Why Gatewood Fence & Gate Is Medway’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. That’s the oldest accountability there is, and it matters in a town like Medway, where a handshake at the transfer station still means something. We don’t dispatch a call center three states away. The person who quotes the job is the person who welds it.
We’ve been locally owned and owner-operated since 2001, with a published address and license number anyone can look up. Our Gate Parts & Welding crew works on ornamental iron, chain-link, and steel tube gates all over Medway, from the colonial-era lots near the historic town center to the 1990s subdivisions off Village Street. When a Medway homeowner calls about a gate dragging on the latch side, we start at the hinge post. That’s where sag lives.
Every job gets the 90-Day Done Right Promise in writing. Not “up to” 90 days. Not “in most cases.” If it’s not done right, one call brings Hal back. No runaround, no “we’ll get back to you.” And we answer the phone 24/7 with a live person. Not a voicemail, not a chatbot. You call, someone picks up.
Our Gate Parts & Welding Services in Medway
We carry gate rollers, hinges, latches, locks, and replacement operator parts for the brands on most Medway driveways. When a part can be welded or rebuilt, we weld it on site. When it’s spent, we replace it with something that’ll outlast the original. Here’s what we do most in Medway:
Hinge Replacement
Hinges on a 25-year-old Medway gate take a beating. Freeze-thaw cycles work the pins loose, and rust eats the barrel from the inside. We replace worn hinges with heavy-duty ball-bearing hardware, then re-hang the leaf so it swings true. A gate that sags in the middle is almost always a hinge-post problem, not a panel problem. We fix it at the post.
Post Replacement
This is the defining Medway job. Norfolk County clay holds water, and frost pushes down four feet every winter. Posts set shallow, or set without gravel drainage, heave up and lean out over a few seasons. We pull the old post, pour a deeper footing with drainage stone, and set the replacement plumb. Then we re-hang the gate and adjust the operator so everything lines up again.
Rail Repair
Welded rail joints on ornamental iron gates fatigue right at the hinge post. You’ll see a hairline crack at the weld, then the panel drops and the latch binds. We grind out the cracked weld, re-weld it hot, and reinforce the joint so it doesn’t just crack again next spring. If the rail is rotted through, we’ll tell you straight: sometimes a replacement rail section is cheaper than fixing a rail that’s more rust than steel.
Custom Welding
Some Medway gates weren’t built to be repaired. Obsolete hardware, odd sizing, old iron with no replacement parts available anywhere. That’s where on-site welding changes the math. We custom-fabricate brackets, patch split tubes, extend posts, and reinforce frames without hauling your gate to a shop. The job happens in your driveway, at your address, on your schedule. Hal has been welding since 2001, and he’d rather fix a gate properly than sell you one you don’t need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Medway
We’re certified to service nine major gate brands, and we keep common parts stocked for the ones we see most on Medway properties: Viking, Ghost Controls, and DoorKing. If your Medway gate has a legacy Viking board that’s acting up, or a Ghost Controls arm that’s lost its travel limits after a cold snap, we can usually get it running the same visit. We also work on Gate Parts & Welding in Medway for operators from LiftMaster, FAAC, BFT, Linear, Elite, and Mighty Mule. If we don’t have the part on the truck, we’ll have it ordered and back out to you quickly.
Common Gate Parts & Welding Problems We See in Medway Homes
Medway’s housing boom from the late 1980s through the 2000s left the town with a lot of gates now in their second or third decade. Those gates hit the same failure points on a schedule. We see these four problems more than anything else:
- Post heave from clay and frost. Norfolk County clay holds spring water, and frost pushes four feet down. Hinge posts lean out of plumb every few seasons, so the latch binds and the frame drags. Properties in Medway’s upper Charles River watershed see it worst.
- Legacy operators with obsolete control boards. Gates from the 1990s and early 2000s often have pre-UL 325 boards. They lack modern entrapment protection, which is a genuine safety issue, especially if kids or pets are around. We can retrofit safety photocells and edge sensors while keeping the old motor running.
- Welded joint fatigue at the hinge post. Freeze-thaw cycles stress the weld where the rail meets the hinge post. Eventually it cracks, and the panel sags. Realignment won’t fix a cracked weld; it has to be re-welded or the sag comes back.
- Rust on gates near the Charles River corridor. Seasonal saturation keeps the bottom rail and hinge pockets damp for weeks each spring. Steel that isn’t periodically wire-wheeled and repainted will rot from the bottom up.
Do You Need To Weld Or Replace? A Straight Answer
Show me the gate closing on its own and I’ll show you where it’s failing. In Medway, the honest answer depends on three things: how deep the footings go, what the steel looks like when you strip the flaking paint away, and whether the operator still has a control board worth keeping.
If the post is heaving because it was set shallow in clay in 1994, welding a gusset won’t fix the footing. That’s a post replacement job. If the hinge ears are cracked but the post is solid, we can weld and re-drill on site and save you a week of downtime. If the rail rusted through along the bottom chord, a full frame replacement is sometimes cheaper than patching rust that already ate through the section.
Hal is genuinely annoyed by sloppy work other companies leave behind. Gates that got “fixed” by wrenching the hinge bolts tighter, or slapping a new operator on a gate with a failing post. You’ll never hear us push for replacement when a weld and a few new bearings will hold. But we’ll also tell you plainly when you’re throwing good money at a gate that’s reached its end.
The specifics matter. A 30-year-old ornamental iron gate near the Charles River corridor in Medway with a rotted bottom rail and a leaning hinge post needs a different answer than a 2015 steel tube gate in a subdivision off Main Street that just needs a new hinge and a travel-limit reset. We quote each one for what it actually is.
Trusted Brands We Service in Medway
Medway driveways feature a mix of operator brands depending on when the gate went in. We’re certified on all nine we service, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For our Gate Motor & Opener in Medway, we stock common replacement boards, remote controls, and safety edges for Viking, GHOST CONTROLS, and ELITE, since those brands show up constantly on the town’s suburban lots. If we don’t have your part on the truck, we’ll order it and have it in hand before the next visit.
Pricing for Gate Parts & Welding in Medway, MA
You’ll get a written price before any work starts. Not a range that becomes a bigger number at the door. Not a “we’ll see when we get there.” Here are typical Medway market numbers:
- Hinge replacement (per leaf): $180-$320 depending on gate weight and hardware.
- Post replacement with new footing and gravel drainage: $450-$900 per post, including re-hanging the leaf.
- Rail weld repair (crack or fatigue at the hinge post): $150-$350 per welded joint.
- Custom welding fabrication (brackets, gussets, reinforcements): $200-$500 depending on complexity.
- Operator retrofit with safety edges and photocells: $650-$1,400 for legacy systems.
- Gate roller replacement (sliding gates): $120-$280 per pair.
Standing offers in Medway: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. The price is quoted and agreed before any work starts. That’s not a footnote. That’s how we’ve done it since 2001.
We Also Serve Cities Near Medway
Gatewood Fence & Gate works throughout Norfolk County and the surrounding towns. If you’re searching for Gate Parts & Welding in Medway, you might also be in Millis, Holliston, Norfolk, or Medfield. We cover all four, with the same live-answer phone line and the same 90-Day Done Right Promise on every job.
Serving Medway, MA - Our Local Coverage Area
We’re based in the Medway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Medway
Straight answers to the questions we hear most often from Medway homeowners:
Because the hinge post is moving, not the gate panel. Medway sits in Norfolk County, where clay soil and a four-foot frost line push shallow footings out of plumb every few freeze-thaw seasons. Spring thaw softens the ground, the post heels over, and the latch binds. Realignment alone won’t hold. The fix is resetting the post in a deeper footing with gravel drainage, or the gate will sag again next March. Call (877) 610-2993 and we’ll find out which post is moving.
Yes, you can retrofit a pre-UL 325 operator with external safety photocells and a contact edge, but whether it’s worth doing depends on the board. Many 1980s and 1990s LiftMaster boards lack the inputs for modern safety devices. We can tell you within a half-hour on site whether a retrofit is possible or whether Gate Access Control in Medway replacement is the cheaper, safer answer. You’ll get a written price before we touch anything. Call (877) 610-2993 and ask for Hal.
Look at the post itself. If the gap between the gate and the post widens toward the top, the post is leaning. If the gate swings fine for two feet and then drags, the panel is dropping. If the latch stops lining up after every freeze-thaw cycle, the post is heaving. We’ll confirm it with a level and a tape measure in about ten minutes. A local Medway fix starts with knowing which failure you’re looking at. Estimates are free. Call (877) 610-2993.
Yes, more than gates on higher, drier lots. Medway’s upper Charles River watershed means low-lying properties get spring groundwater saturation that keeps the bottom rail and hinge pockets damp for weeks. We wire-wheel, treat with a rust converter, and use a marine-grade primer before painting. It’s standard practice on any welded repair we do near the river corridor. If we see rust eating through from the inside, we’ll show you before we weld anything.
Welding a cracked rail runs $150-$350 per joint in Medway. Replacing a complete ornamental iron frame runs $1,200 and up. The cheaper fix is usually the weld, but only if the surrounding steel is still sound. If the rail is rotted through or the crack runs within a few inches of another rust pocket, welding becomes a short-term fix. We’ll price both honestly and give you a written quote for each option. Call (877) 610-2993 and we’ll come look at the gate in person.
Call Gatewood Fence & Gate for Gate Parts & Welding in Medway
If your Medway gate is sagging, binding, or the operator stopped listening after a hard freeze, call (877) 610-2993. A live person answers, day or night. We’ll get you on the schedule, get eyes on the gate, and give you a written price before any work starts. Hal’s been fixing gates since 2001, his name is on the shop, and his shop is down the road. That’s the oldest accountability there is. Free estimates in Medway and throughout Norfolk County. The 90-Day Done Right Promise comes in writing on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Medway since 2001.