Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Marietta
Gate repair in Marietta usually costs between $185 and $440 for most hinge, post, and opener fixes, and the bulk of our work here involves ornamental iron and automated swing gates in East Cobb’s HOA subdivisions. If your gate sags, won’t close, or the keypad stopped working after a storm, we can typically get to your Marietta property the same day or next morning. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
We’ve worked on enough gates in ZIP codes 30008, 30060, 30061, and 30062 to know that Marietta has its own rhythm of gate problems. The red clay heaves posts. The summer lightning cooks control boards. And the HOA architectural review process means a sagging gate can sit untouched for months while paperwork bounces between a homeowner, a management company, and a committee that meets once a month. We understand that reality because we live inside it every week. Hal Gatewood has been fixing gates since 2001, and his name is on the shop. That means when we quote a price over the phone, it’s the price on the invoice.
Key Takeaways for Marietta Gate Repair
- Most hinge, post, and operator repairs in Marietta run $185-$440, with a written quote agreed before we start.
- We answer calls 24/7 with a live person. No call center, no chatbot, no three-rings-then-voicemail.
- Marietta’s red clay soil heaves gate posts every winter. We reset footings into stable subsoil, we don’t just tighten hinges and hope.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
Why Gatewood Fence & Gate Is Marietta’s Preferred Gate Repair Company
We’ve built our reputation in Marietta one gate at a time, and most of our calls come from homeowners and HOA management companies who already know their neighbor’s gate was fixed by us. We don’t chase reviews, but the ones left by Marietta customers after a hinge post reset or a lightning-damaged board repair tell the same story: we showed up when we said we would, we fixed what was actually broken, and we didn’t try to sell a new gate when a weld would do. That repair-first mindset matters in Marietta, where ornamental iron gates in 1980s and 1990s subdivisions were built to last 20 to 30 years and are now entering exactly that end-of-life window.
Our response time to Marietta is built into how we schedule. We route from our metro office so that a morning call from a homeowner off Roswell Road or a management company near Sandy Plains gets a boots-on-the-ground visit the same day in most cases. We know the ZIP codes, we know the traffic patterns on Johnson Ferry and Post Oak Tritt, and we know that when a community entrance gate fails during afternoon pickup at a subdivision off Shallowford Road, you cannot wait until Thursday. Hal coordinates every job himself. The person who answers the phone is the person who knows whether your gate needs a new hinge or a new post footing.
We’re licensed, insured, and bonded, with a published address and a license number anyone can look up. Hal Gatewood’s name is on the shop and on every invoice. He has been at this since 2001, and he genuinely gets annoyed when he finds sloppy work somebody left behind. A gate sags in the hinge post, not in the middle, and that is where we start.
Our Gate Repair Services in Marietta
Hinge & Post Repair
Marietta’s red clay soil is the number one reason we reset hinge posts. Posts installed at the standard 24-inch depth during the 1985-2005 subdivision boom heave upward every wet winter and settle back in dry summers, slowly pulling the gate out of plumb. We dig down to stable subsoil, reset the post with proper concrete, and weld or bolt the hinge assembly back so the gate actually swings true. In Marietta, a hinge and post reset typically runs $280-$440 depending on post size and whether we need to cut and re-weld the hinge barrel. We fix the post without replacing the gate.
Gate Realignment
When a gate drags on the driveway or won’t latch, the symptom is a misaligned leaf. The cause is almost always below ground. We realign the gate by correcting the post, not by grinding the latch plate or throwing washers at the hinge. That’s the difference between a fix that lasts a decade and one that lasts six months. For single-driveway swing gates in East Cobb neighborhoods, alignment work usually runs $185-$320. The price is quoted and agreed before any work starts.
Electric Gate Repair
Electric gate problems in Marietta follow a seasonal pattern. From May through September, afternoon thunderstorms surge or directly strike operator circuit boards and loop detectors. We diagnose the board, replace fuses or the board itself when needed, and rebuild the wiring connections inside the operator housing. For FAAC, BFT, Linear, and Viking operators installed in East Cobb subdivisions, an electric repair typically runs $220-$390 depending on whether it’s a board swap or a full diagnostic with new loop detector wire. We carry common boards and parts for Marietta jobs so we are not waiting a week on a distributor.
Automatic Gate Repair
Automatic gates in HOA communities combine mechanical and electronic failures in ways that frustrate residents. The gate opens but won’t close, or closes but won’t open, or the keypad freezes out the HOA’s own board members. We work on the full system: operator, limit switches, photo eyes, loop detectors, keypad, and the mechanical swing or slide assembly behind it. Automatic gate repair in Marietta commonly runs $260-$420, depending on whether we are replacing a control board, recalibrating a limit switch, or repairing a damaged loop detector. We also do Gate Repair on manual ornamental iron gates, so you don’t have to call two companies.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marietta
We are certified to service nine major gate brands, and in Marietta we see a heavy concentration of FAAC and BFT hydraulic operators on older ornamental iron gates, plus Linear and Viking on newer slide and swing systems. We keep common control boards, photo eyes, and loop detector parts stocked for Marietta customers, which shortens turnaround when your community entrance gate goes down on a Friday afternoon. If your operator is a brand we don’t stock, we still quote it honestly and order it with a realistic lead time. No inventing a two-week wait because we forgot to check.
Common Gate Repair Problems We See in Marietta Homes
- Heaving hinge posts from red clay soil. Marietta’s clay expands when wet and contracts when dry, pushing 24-inch footings upward over time. Fix the panel without the post and you’ll fix it twice.
- Lightning-damaged control boards during summer storms. June through August is our busiest board-replacement season in ZIPs 30062 and 30066. A close strike jumps through the keypad wiring and dead shorts the board, even when the gate looks fine.
- HOA approval delays leaving gates unsafe. We regularly meet with Marietta homeowners whose sagging gate has been sitting for months because the architectural review committee hasn’t approved a post reset that changes footing depth. We document the condition and the fix in writing so the board has what it needs to approve the work.
- Loop detectors damaged by delivery trucks and construction vehicles. In gated subdivisions off Post Oak Tritt and Sandy Plains, a single FedEx or landscape truck can crush the saw-cut loop at the entrance, leaving the gate permanently open. We re-cut, re-wire, and re-seal the loop so the gate closes on its own again.
Pricing for Gate Repair in Marietta, GA
Here is what you can expect to pay for common gate repairs in Marietta, based on what we actually see in ZIP codes 30008, 30060, 30061, and 30062:
- Hinge and post reset: $280-$440
- Gate realignment: $185-$320
- Electric board or wiring repair: $220-$390
- Automatic gate system repair: $260-$420
- Weld and rust repair on ornamental iron: $160-$300
There is no trip charge inside the county, and we take $40 off any repair over $200. We give a free second opinion on any written estimate from another company, which comes in handy when an HOA board has three quotes and none of them explain why their prices differ. Every quote is written, and the price is agreed before any work starts. Call (877) 610-2993 for a free estimate. We also offer a permanent 10% discount for seniors and veterans in Marietta.
We Also Serve Cities Near Marietta
Beyond Marietta, our gate crews work in Marietta‘s neighboring communities: Fair Oaks, Smyrna, Vinings, and Kennesaw. If your gate is in one of those areas and the HOA board has been waiting on an approval, give us a call. We will tell you honestly whether we can fix it now or whether the approval needs to come first. We work the same repair-first way everywhere, and the 90-Day Done Right Promise applies in every one of those cities.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Marietta
Yes, nearly every HOA in Marietta, especially in East Cobb’s 30062 and 30066 ZIP codes, requires written architectural approval before you change the gate style, height, finish, or footing depth. The key distinction is that repairing a gate to match its original condition usually does not require approval, but resetting a post deeper than the approved 24-inch footing does. We write up the condition report and the proposed fix in terms your architectural review board can act on, so the approval doesn’t stall the work for another two months. Call (877) 610-2993 and we’ll help you document it.
Because the post footing is heaving in the red clay. Marietta’s heavy clay soil expands during wet winters and pushes the post upward, which drags the gate leaf out of alignment no matter how many times you tighten the hinge bolts. The real fix is resetting the post into stable subsoil below the typical 24-inch depth. That’s what we do, and that’s why the gate stops sagging.
Yes, we can start on parts of the job that don’t require architectural approval while the management company finishes its paperwork. We can diagnose the operator, replace damaged wiring, repair a board, and fix safety edges because those are maintenance items, not architectural changes. When the post reset or gate replacement needs approval, we provide the documentation the management company and HOA board need to sign off. We’ve worked with dozens of Marietta communities on that exact sequence.
Usually both. A nearby lightning strike enters through the keypad wiring, which runs to the control board. The surge damages the board, and the heat can melt the low-voltage wiring inside the conduit. We test the board, the keypad, and the wire run between them. In most Marietta lightning-damage cases, you’re looking at a board replacement plus a wiring repair, around $220-$390 total. Call (877) 610-2993 for an exact quote. Estimates are free.
Any repaired automatic gate in Marietta must meet UL 325 entrapment protection standards, which include properly functioning photo eyes, contact sensing edges, and a working reverse mechanism. Your HOA can and often does check this, especially on community entrance gates where the association carries liability. We test and adjust all entrapment protection as part of every automatic gate repair, and we’ll show you the result before we leave. The safety side is not optional, and we don’t skip it.
Contact Gatewood Fence & Gate for Gate Repair in Marietta
If your gate sags, won’t open, or got fried by a summer storm, call (877) 610-2993 for a free estimate. You’ll get a live person, a straight answer on price, and a repair that’s done right the first time. Hal Gatewood’s name is on the shop, the shop is down the road, and the 90-Day Done Right Promise is in writing on every job. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marietta since 2001.