Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Marietta
Gate access control in Marietta means keypads, intercoms, card readers and phone entry systems that let the right people in and keep everyone else out. We’ve been working on these systems in Marietta’s HOA communities since 2001, and we know the two things that actually matter here: getting the hardware right, and getting the approval done so the work isn’t stalled by a management company. If you’ve got a keypad that’s dead, a phone entry system that drops calls after every summer thunderstorm, or a video intercom your HOA wants matched to the community’s black aluminum finish, call Hal Gatewood at (877) 610-2993. A live person answers, day or night.
Why Gatewood Fence & Gate Is Marietta’s Preferred Gate Access Control Company
Hal Gatewood started this company in 2001 and his name is on the shop. That matters in Marietta because the person who shows up to your gate is the person who owns the problem. We don’t hand work off to strangers. When a swing gate off Johnson Ferry Road needs a new keypad wired in before the HOA’s monthly walk-through, we’re the ones doing it.
We’ve spent over two decades working inside Marietta’s gated subdivisions, where the rules are different. Architectural committees want finish-match approval before anything changes. Management companies want paperwork. Homeowners just want the gate to open when they punch in the code. We handle all three. Our 90-Day Done Right Promise is in writing on every job, and it means what it says: if the work isn’t right, one call brings us back. No runaround. We also answer the phone with a live person around the clock, not a voicemail and not a call center.
Our Gate Access Control Services in Marietta
We install, repair and upgrade every part of a gate access control system in Marietta, from the keypad at the pedestal to the phone app on your phone. Here’s what we handle most often:
Keypad Entry
Keypads on Marietta gates take a beating from Georgia sun and summer downpours. We swap out failed keypads, rewire corroded connections, and program new codes so everyone in the house gets in without honking. If your HOA requires a specific keypad model or finish, we coordinate that before we touch a wire. A typical keypad replacement in Marietta runs $220 to $480 installed, depending on the pedestal condition and whether the old wiring is still usable.
Phone Entry
Phone entry systems at Marietta’s gated communities route calls to residents when a visitor punches in a directory code. These systems fail often after lightning storms, which are a regular thing from May through September. We’ll diagnose whether the board is fried or just misconfigured, and we stock replacements for the brands most common on East Cobb gates: LiftMaster, Linear, Viking, FAAC and BFT. A phone entry control board swap in Marietta typically runs $300 to $650, and we won’t quote it until we’ve seen the panel.
Video Intercom
Adding a video intercom to a Marietta gate usually means mounting a new plate on existing black aluminum or wrought iron. The HOA almost always cares about the finish. We’ll get the approval process moving, match the mounting plate to the community standard, and run the power and data lines the right way. Expect $450 to $1,100 for a single-family video intercom install in Marietta, depending on the wire run and the panel type.
Card Reader
Card readers are the quiet workhorse of Marietta’s community entrance gates. We install HID-compatible readers, tie them into existing access control panels, and program cards for new residents. When a reader gets hit by lightning or just wears out, we replace it and leave the old wiring labeled so the next service call is faster. A card reader replacement in Marietta runs $200 to $500, not counting the panel if that’s damaged too.
Every one of these jobs carries our 90-Day Done Right Promise. And if you’re in Marietta, there’s no trip charge for us to come look at what you’ve got.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marietta
We’re certified to service nine major gate brands, and on a typical Marietta service call we’re working on FAAC, BFT, Linear or Viking operators. That matters because these older systems in 1980s and 1990s subdivisions are reaching the age where circuit boards fail, photocells get flaky, and limit switches wear out. We stock common boards and parts locally, so a repair doesn’t sit for a week waiting on a shipment from somewhere else. If it can be fixed, we fix it. We don’t try to sell you a whole new operator because one capacitor blew.
Common Gate Access Control Problems We See in Marietta Homes
Marietta’s climate and housing stock create a specific set of problems. Here’s what we see most:
- Lightning-damaged control boards. Marietta’s humid subtropical summers bring afternoon thunderstorms that surge and sometimes directly strike gate operator circuit boards. LiftMaster and Viking boards get fried, and suddenly the whole community’s phone entry is down. We replace the board, check the grounding, and usually add surge protection that the original installers skipped.
- Red clay heave shifting gate posts out of plumb. Georgia red clay expands in wet winters and contracts in dry summers. Posts that were set at 24 inches in the subdivision buildout era heave noticeably, which throws the swing gate out of alignment and causes it to bind on the operator, trip loop detectors, and frustrate everyone trying to exit during morning rush hour on Roswell Road or Johnson Ferry.
- HOA finish-match delays. It’s common for a management company in East Cobb to require architectural committee approval before we can replace rusted hinges or a mounting plate on a black aluminum gate. We handle the coordination directly so the repair isn’t stalled for weeks over a powder-coat color code.
- Worn keypad membranes and sun-damaged displays. Marietta gets a lot of direct southern sun, and it degrades keypad faces and small display screens faster than you’d expect. If your keypad beeps but won’t register codes, the membrane is usually the culprit, not the board behind it.
Pricing for Gate Access Control in Marietta, GA
Here are the numbers we typically see in Marietta, so you know what to expect before anyone shows up. Keypad entry system install or replacement: $220 to $480. Phone entry board replacement: $300 to $650. Card reader install or swap: $200 to $500. Video intercom add-on or replacement: $450 to $1,100. Full access control panel replacement with resident programming: $700 to $1,800, depending on the number of residents and cards in the system. What actually drives cost is the age of the existing wiring, whether the post is plumb, and how much HOA coordination the job requires. We always quote the price before we start, and the price we quote is the price you pay. Call (877) 610-2993 for a free estimate. If you’re in Marietta, there’s no trip charge. And if you already have a written estimate from someone else, bring it and we’ll give you a free second opinion.
We Also Serve Cities Near Marietta
From our shop we run calls up through Fair Oaks, across to Smyrna, down into Vinings, and up to Kennesaw. Most of our day is spent inside Marietta itself, especially the East Cobb communities off Johnson Ferry and Roswell Road, but if you’re just over the line in a neighboring ZIP, call and we’ll tell you straight what we can do. You can also read more about our Gate Access Control services or see what else we handle across Marietta.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Marietta
In most East Cobb gated subdivisions, especially those in the 30062 and 30066 ZIPs, yes. The architectural committee typically has finish and hardware standards for anything mounted on the gate or pedestal, and management companies enforce them. We coordinate that approval directly with your HOA or property manager before any work starts. It adds a step, but it keeps the work from being torn out later. Call (877) 610-2993 and we’ll help you figure out what your specific community requires.
The sag is almost always the post, not the gate leaf itself. Marietta’s red clay soil heaves when it gets wet, and posts set at 24 inches in the 1980s and 1990s subdivision boom move with it. That throws the gate out of plumb and the operator takes the stress, which is why your limit switches fail or the gate binds. The real fix is resetting the post into stable subsoil, sometimes with a deeper footing, then re-aligning the operator. We do that work on site without hauling your gate anywhere. Call (877) 610-2993 for a look.
Yes. We match the finish on the plate and the hardware to the community standard before we mount anything, and we’ll submit the spec to your management company for approval if the HOA requires it. This is the kind of coordination that keeps a video intercom upgrade from turning into a violation letter. Call (877) 610-2993 and we’ll get the process started.
It’s common enough that we see it every summer. Marietta gets frequent afternoon thunderstorms from May through September, and direct or nearby lightning strikes surge the control boards on older phone entry systems. The fix usually involves replacing the board and adding proper surge protection on the low-voltage side, which many original installs never had. A board replacement for this issue in Marietta runs $300 to $650. Call (877) 610-2993 and we’ll get you back online the same day when parts are on hand.
Usually it falls on the homeowner or the HOA to get approval, but we’ll take that coordination off your plate. We’ve worked with management companies all over Marietta, and we know what they need: finish specs, the written quote, and a timeline. We’ll provide all of it and follow up until the approval comes through. Then we do the work and stand behind it with our 90-Day Done Right Promise. Call (877) 610-2993 and we’ll get the paperwork moving today.
Call Hal Gatewood for Gate Access Control in Marietta
If you live in Marietta and your gate keypad, phone entry, card reader or video intercom is acting up, call Hal Gatewood at (877) 610-2993. A live person answers, day or night. You’ll get a straight answer, a written quote before we start, and the name of the man who owns the company on the invoice. We’ve been fixing gates in Marietta since 2001, and we’re not hard to find. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Marietta since 2001.