Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Loomis
Gate repair in Loomis usually means one of three things: a swing gate that’s sagging off its hinge post, a slide gate that’s grinding through acorn debris, or an opener that quit after a summer of fighting a misaligned track. Most jobs run between $180 and $540 depending on what’s failed and how long it’s been left to get worse. We fix all of it, same day when the part’s on the truck, and we quote the price before any work starts. Call (877) 610-2993 and a live person answers, day or night.
Hal Gatewood has been at this since 2001. The name’s on the shop and on every invoice. When your gate binds in the middle of a Loomis summer, you don’t want a national company that routes your call to someone three states away. You want the person who knows that decomposed granite heaves posts out of plumb and that valley oaks drop limbs into slide tracks every time the wind picks up.
Why Gatewood Fence & Gate Is Loomis’s Preferred Gate Repair Company
Loomis is different from Rocklin or Roseville in one big way: a single property here often has both an ornamental driveway gate and a working livestock gate, sometimes two or three. That means the repair company you call has to understand both a precision-machined Viking opener on a custom iron gate and a 14-foot pipe-panel corral gate hung on a wooden post your grandfather might have set. We do both, and we do them on the same service call whenever it makes sense.
We’re locally owned and owner-operated. Hal runs the shop, answers the phone around the clock, and shows up on the jobs he schedules. No voicemail queue. No “your call is important to us” recording. The published address and license number are there for anyone who wants to look us up, and the 90-Day Done Right Promise is in writing on every job, not buried in fine print. If it’s not done right, one call brings us back. No runaround.
Loomis customers call us because the other outfit quoted one number on the phone and charged another at the door. We quote the price before we start, and that’s the price. Standing offer: $40 off any repair over $200, no trip charge inside Placer County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Our Gate Repair Services in Loomis
Electric Gate Repair
Electric gate repair in Loomis typically runs $190-$420, and the most common failure we see is a control board that’s been fried by a gate binding against a shifted post. When the opener has to work harder on every cycle, the board and the motor both take the hit. We diagnose the whole system before we swap any part, because replacing a board without fixing the bind means you’ll replace it again next year. We service Linear, Viking, Ghost Controls, and DoorKing openers, among others, and we stock common boards and sensors on the truck for faster turnaround.
Automatic Gate Repair
Automatic gate repair in Loomis often comes down to sensors and safety edges. A photocell that’s drifted out of alignment after a post shifted will stop the gate at random, and a worn safety edge will reverse it when nothing’s there. We check the operator, the limits, the edge, the photocell, and the physical condition of the gate itself, because an operator can’t run true on a gate that’s sagging. Most automatic gate repairs run $160-$380 for parts and labor, quoted before we start.
Hinge & Post Repair
Hinge and post repair is what we do more than anything else in Loomis. The foothill soil here, that decomposed granite and clay mix, expands when it’s wet and contracts when it’s dry, and over a few seasons it rocks even concrete-set posts out of plumb. Once the post leans, the hinge carries the gate’s full weight at an angle, and either the hinge shears or the gate drags. We reset posts, repack the base, weld cracks in the hinge pivot, and get the gate swinging free again. A typical hinge and post repair runs $220-$540 depending on how far the footer has moved.
Gate Realignment
Gate realignment in Loomis is rarely just an adjustment bolt. It usually means finding why the gate moved: a heaving post, a cracked weld, a hinge that’s worn egg-shaped. We level the gate against the post, weld what’s cracked, adjust the hinge spacing, and set the operator limits so the gate cycles without fighting itself. Realignment alone runs $150-$300 when the structure’s still sound; if a post needs resetting, that’s the hinge and post repair range above.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Loomis
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Loomis, we see a lot of Viking openers on equestrian properties and Ghost Controls on smaller residential driveway gates, plus DoorKing on the bigger custom slide gates off the Loomis Basin roads. Because we know which brands are common out here, we keep parts that match them on the truck, which means fewer second trips and faster fixes for Loomis customers. A live person answers when you call to ask whether we work on your opener, and the answer is almost always yes.
Common Gate Repair Problems We See in Loomis Homes
- Sagging swing gates from heaving posts. The clay-loam and decomposed granite soil around Loomis expands and contracts enough over a few seasons to tilt even well-set posts. Once the post moves a few degrees, the gate sags, the latch misses, and the operator strips its gears trying to compensate.
- Acorn and limb debris in slide gate tracks. Valley oaks and blue oaks drop acorns, twigs, and broken branches into slide tracks after every wind event. When a rack jams on debris, the opener motor burns out trying to force it.
- Weld fatigue on wrought-iron driveway gates. Loomis summers push past 100°F and winters dip below freezing, and that thermal cycle cracks old welds. The iron expands, contracts, and eventually the weld at the hinge post lets go, dropping the latch side by an inch or more.
- Dual-gate properties with mismatched problems. On many Loomis acreage parcels, the ornamental driveway gate and the corral pipe gate fail in the same season but for different reasons. The iron gate cracks at a weld while the pipe gate’s wooden post rots at the ground line. Fixing one without checking the other means two service calls instead of one.
Pricing for Gate Repair in Loomis, CA
Here’s what Loomis customers generally pay, parts and labor included, quoted and agreed before we start:
| Repair Type | Typical Range in Loomis |
|---|---|
| Gate realignment (no post reset) | $150 - $300 |
| Hinge repair or replacement | $180 - $350 |
| Post reset and repack | $280 - $600 |
| Weld repair, per crack | $90 - $180 |
| Opener / control board repair | $190 - $420 |
| Full auto gate service and safety check | $220 - $520 |
Heavy pipe-panel corral gates usually fall at the upper end because they’re heavy and the posts are big. Custom ornamental gates with matched intercom and camera entry run higher on the opener side but the gate structure itself follows the same ranges. Estimates are free. No trip charge inside the county. Call (877) 610-2993 and we’ll give you a written number before any wrench turns.
We Also Serve Cities Near Loomis
Our Gate Repair crew regularly serves properties in Rocklin, Granite Bay, Roseville, and North Auburn, all within a short drive of Loomis. If you’re on the edge of 95650 or just over the line in any of those towns, call and ask - chances are we’re already scheduled nearby. Dispatch is coordinated from our Sacramento office, and the person who answers knows the whole service area. You can also read more about our local coverage on the Gate Repair in Loomis page.
Serving Loomis, CA - Our Local Coverage Area
We’re based in the Loomis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Loomis
The gate is sagging because the post is leaning, not because the bolts wore out. Loomis’s decomposed granite and clay soil heaves seasonally, rocking the post footer out of plumb. New bolts in a leaning post will shear again within a season. We reset the post, repack the base, and only then replace the hinge hardware. Call (877) 610-2993 for a free estimate; we’ll tell you honestly whether the post needs resetting or the hinge alone will do.
On a property with valley oaks near the gate, clear the track at least every two weeks from September through January, and after every significant wind event. Acorns grind into the rack and jam the gate, and a jammed rack burns out slide gate openers fast. We inspect track and rack condition as part of every slide gate service call, and we’ll show you what to look for between visits.
Usually, yes. We cut away the rotted section at the base of the post, scarf in a treated stub, and remount the hinges, which preserves the original post where it’s still sound. If the rot has traveled deep into the footer, the post comes out and gets reset in new concrete. Either way the gate hangs true again. Call (877) 610-2993 and we’ll look at it.
Gatewood Fence & Gate doesn’t make operators; we service them. We’re certified on nine major brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you have an operator from any of those, we can repair it. If you have something obscure, call (877) 610-2993 and we’ll tell you straight whether we can get parts.
Yes. A missing or misaligned photocell is a safety defect and a common finding on property inspections in Placer County. We realign or replace photocells, test the safety edge, and verify the reverse function on every automatic gate service. It’s part of a standard service call, not an add-on. Call (877) 610-2993 to schedule a safety check with your next repair.
High-End Properties Around Loomis Need a Different Level of Care
Loomis has its share of custom homes with ornamental iron driveway gates, matched intercom and camera entry, and underground operators that cost more to replace than a used truck. These gates are heavy, often 400 pounds or more, and they demand a level of precision that a box-store handyman simply can’t provide. A bespoke gate that drags by half an inch wears out rollers, burns operator gears, and sounds like a dying animal every time it cycles. We set them so they run silent, and we weld on site so the gate never leaves the property.
On a Loomis Basin equestrian property off King Road, a Viking swing gate opener had torn its mounting bolts clean out of a leaning telephone-pole-diameter hinge post. The decomposed-granite-and-clay soil had rocked the post footing just enough to bind the gate, and the operator was fighting the sag correction on every cycle. We removed the old concrete footer, reset the post with new concrete, repacked DG around the base, reinstalled the operator, and realigned the safety photocell. The gate cycled silently through the next wet winter. That’s the kind of repair you can’t do by swapping parts from a catalog; you have to understand why the gate moved in the first place.
This matters in Loomis because the same property often has both: the ornamental entry gate on the driveway and the working pipe-panel gates on the corral or pasture. A generic gate repair page won’t tell you that. We will. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Loomis since 2001.