Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Loomis
Gate motor repair in Loomis usually runs $185-$390 for most opener failures, and a full motor replacement with installation typically lands between $1,150 and $2,800 depending on gate weight and whether you need solar or line power. We’re Hal Gatewood’s crew, and we’ve been out to Loomis driveways enough times to know the difference between a motor that died from age and one that’s been fighting a sagging post for three years. When your opener quits, the gate usually won’t budge by hand either, which means your car is stuck on one side or the other. Call (877) 610-2993 and a live person answers. That’s not a recorded line. It’s us.
We work throughout the 95650 zip code, from the older ranch parcels off King Road to the newer custom builds up toward the Loomis Basin. The town isn’t big, but the gates here are a different animal from what you’ll find fifteen minutes down the road in Rocklin. That’s what this page is about. Before you call anybody, you should know what actually applies to Loomis, not just gate openers in general.
Why Gatewood Fence & Gate Is Loomis’s Preferred Gate Motor & Opener Company
We’re locally owned and owner-operated, and we have been since 2001. Hal Gatewood’s name is on the shop and on every invoice. Our address is published and our license number is there for anyone to look up. If a repair goes sideways, you can drive to the shop and look Hal in the eye. That’s the oldest accountability there is, and around Loomis it still means something.
Our reputation here comes from showing up in the window we promised and doing the repair in the driveway instead of hauling the gate off to some warehouse. We weld on site. We replace what’s actually broken, not what’s convenient to bill. Every job we do carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
Loomis customers don’t have to wait on a dispatch queue from three states away. Calls ring to a live person 24 hours a day, 7 days a week. Our crews serve Loomis locally, coordinated from our Sacramento office, and we keep common Loomis parts in the truck so we aren’t running back to a supply house mid-job. When your gate is stuck open and your horses are eyeing the road, that response time matters.
Our Gate Motor & Opener Services in Loomis
Here’s what we actually handle out here, and where each one shows up most in Loomis.
Motor Installation
Most Loomis parcels are one to five acres, and a good number of those driveways are long gravel runs where the gate sits fifty to two hundred feet from the house. That changes the installation. You need a motor sized for the gate’s actual weight and wind load, not whatever the big-box store had on the shelf. We install slide, swing, and solar openers on both ornamental iron driveway gates and the heavy steel pipe gates Loomis equestrian properties use. Every installation gets a written price before we start, and you approve it before any work begins.
Motor Repair
When a gate motor fails in Loomis, we usually find one of three things: a control board fried by a summer heat spike, stripped gears from years of acorn debris in the track, or a post that’s tilted enough to make the operator fight for every inch. We diagnose the actual cause and fix it. Show me the gate closing on its own and I’ll show you where it’s failing, Hal likes to say. We repair first. If a part truly can’t be saved, we tell you plainly and put a fair number on the replacement.
Linear Motor
Linear swing gate motors are common on the older ranch-style homes around Loomis, especially where the gatepost is solid and the gate itself is a single ornamental panel or a lighter pipe frame. Loomis’s clay-loam soil expands and contracts through the wet winter and the dry summer, which tilts older wood posts out of plumb over time. A linear arm that worked fine for a decade will start grinding when the post moves two degrees. We square the post first, then mount the motor, or the new one eats itself within two seasons.
Slide Motor
Long gravel driveways and wide gates mean slide operators are the right call for a lot of Loomis properties. A 24-foot custom steel gate on a rack and pinion drive is a different job than a 12-foot aluminum gate in a suburban tract. We size the motor for the gate’s actual weight, install the rack properly, and set the safety photocells to account for grader ditches, uneven shoulders, and the rocks that come loose every winter. On a 3-acre parcel off Barton Road, our crew replaced a failing LiftMaster slide operator where buried AC power was never run to the gate. We installed a solar opener with battery backup and a rack and pinion drive sized for that 24-foot gate, then set the photocells to work with the grader ditch at the property line. That same client had us back a month later to tune the identical operator on their corral pipe gate, where the original post footing was rocking in decomposed granite. That’s a normal Loomis job for us.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Loomis
We’re certified to service nine major gate brands, and around Loomis we see a lot of FAAC, BFT, and Linear operators on the acreage properties. We also service LiftMaster, Viking, and the rest of the major names. We keep common boards, arms, photocells, and remotes for these brands in the truck, which means faster turnaround when your gate goes down on a Saturday morning and you’ve got a trailer to move. If we need a part we don’t stock, we order it and come back, and you’re not charged for a second trip.
Common Gate Motor & Opener Problems We See in Loomis Homes
- Rocking footers in decomposed granite. Much of Loomis sits on DG soil, and concrete footers poured into DG don’t grip the way they do in valley clay. A heavy steel pipe gate swinging on a telephone-pole post will rock the footer loose over a few years, and the operator starts straining against a hinge that’s moving. The fix isn’t a new motor. It’s repacking the DG, re-setting the footer, and only then adjusting the hinge and drive.
- Acorn and limb debris in tracks and photocells. Valley oaks and blue oaks grow on nearly every Loomis parcel. After a wind event, acorns drop into slide tracks and broken limbs wedge against rack and pinion drives. The motor still runs, but it’s fighting debris. The fix is usually a thorough track cleanout and a reposition of the photocells so they aren’t blocked by a pile of leaves every morning.
- Seasonal post tilt from clay-loam expansion. The foothill soil around Loomis drinks winter rain and bakes dry by July. That cycle moves wood posts out of plumb by inches over a decade. A swing gate that dragged in January but worked in August is almost always a post issue, not a motor issue. Fix the panel without the post and you’ll fix it twice.
- Solar operators undersized for the gate’s real load. A surprising number of Loomis driveway gates are running on solar openers sold for a much lighter gate. The panel and battery handle sunny weeks, but after three cloudy winter days the motor stalls halfway through a cycle. We size the panel and battery for the gate’s actual weight and the winter sun angle in Loomis, which is not the same math as a sunny lot in Arizona.
Pricing for Gate Motor & Opener in Loomis, CA
Here are real numbers for Loomis, not brochure prices. A swing gate opener repair typically runs $185-$390, including the service call and common parts like capacitors, control boards, and limit switches. Slide motor repairs run slightly higher, usually $240-$450, because the rack and drive assembly takes more labor to access. A full motor replacement with installation runs $1,150-$2,800 depending on gate size and whether the site has line voltage or needs solar. Solar gate openers with battery backup installed on a Loomis acreage property usually run $1,800-$3,500, sized for the gate and the winter sun. The price is quoted and agreed before any work starts. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a straight number.
We Also Serve Cities Near Loomis
Our Gate Motor & Opener team works across the Placer County foothills. If you’re in Rocklin, Granite Bay, Roseville, or North Auburn, we serve those areas with the same owner-operated, 24/7 live-answer promise. We also handle gate motor work across Loomis for the outlying parcels that don’t show up on every map.
Serving Loomis, CA - Our Local Coverage Area
We’re based in the Loomis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Loomis
Yes, a properly sized solar opener can absolutely run a heavy steel pipe gate in Loomis, and it is often the best choice on long gravel driveways where running buried AC power would mean trenching hundreds of feet and pulling a permit. The key is sizing. The panel and battery have to match the gate’s actual weight and the cloud cover we get in winter. We’ve installed solar openers on 24-foot steel gates off Barton Road and on corral pipe gates that swing a dozen times a day. Call (877) 610-2993 for an exact quote, and we’ll tell you whether solar or line power makes more sense on your parcel.
Almost always, it’s the post. The clay-loam soil around Loomis expands with winter rain and contracts through the dry summer. Over several years, that moves a wood hinge post a few degrees out of plumb. The operator isn’t weaker in winter. It’s pushing against a gate that doesn’t hang the same as it did in August. The fix is re-setting the post and re-hanging the gate before adjusting the motor. If that sounds like your gate, call (877) 610-2993 and we’ll come check the post before selling you a new opener.
Yes, and in Loomis it’s practically a requirement. Many properties here have an ornamental iron driveway gate up front and a heavy steel pipe livestock gate out back, and they fail in different ways. The driveway gate usually needs a slide or linear swing operator. The corral gate is often a heavy pipe swing hung on a telephone-pole post set in decomposed granite, and that post may be rocking. We handle both and we tune the operator differently for each. Call (877) 610-2993 and describe your setup; we’ll know what you’re talking about.
California follows UL 325 and ASTM F2200 standards for automatic gate operator entrapment protection. On a horse property in Loomis, that means properly positioned photocells, monitored entrapment sensors where required, and signage that covers both vehicles and, where applicable, mounted riders and pedestrians. It also means setting the operator’s force limit correctly so it reverses before doing damage. This is not a place to skip a step. We set every gate to current code and note it on the invoice.
You can’t stop the oaks, but you can stop them from becoming a motor problem. The two things that help most are a sealed track cover or brush guard where possible and the photocells mounted out of the debris path. Twice a year, blow out the rack and pinion track and clear the area around the safety eyes. If the gate is already grinding from debris, call (877) 610-2993 and we’ll clean it out properly and check for gear wear before it gets expensive.
Call Gatewood Fence & Gate for Gate Motor & Opener Work in Loomis, CA
If your gate motor is grinding, stalling, or dead, call (877) 610-2993. A live person answers. We’ll set a real window for the visit, show up on time, quote the job before any work begins, and stand behind it with our 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Loomis since 2001.