Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lilburn
A sagging gate in Lilburn is rarely just a hinge problem, and by the time most people call us, the post underneath has been moving for years. That is the red clay doing what red clay does. If you live in the 30047 or 30048 zip codes, you know the ground swells in summer downpours and shrinks in dry weeks, and every cycle works a gate post a little looser. We have been fixing exactly that since 2001. If your driveway gate binds, drags, or will not latch right, call (877) 610-2993 and Hal or one of his crew will head to Lilburn the same day. We quote the price before any work starts, and we do not change it at the door.
Most Lilburn gate repairs we handle fall into three buckets: hinge and post repair, gate realignment, and electric gate repair. The opener is often getting blamed for what the post started. We fix the post first, then the gate, then the opener. In that order.
Why Gatewood Fence & Gate Is Lilburn’s Preferred Gate Repair Company
Hal Gatewood has been running this shop since 2001, and his name is on the invoice every time. That matters more in a place like Lilburn than it does in a big metro, because you will see the same truck at the same hardware store. We are not a call center and we are not a franchise. When you call (877) 610-2993, a live person answers, even at 2 a.m. when a gate has come off its track and the driveway is wide open.
Every job we do in Lilburn carries the 90-Day Done Right Promise in writing. If something is not right, one call brings us back. No runaround, no phone tree. That promise is stamped on the paperwork, not hidden in fine print. We also publish our address and license number. You want to look us up before you hire us? Go ahead. You want to drive to the shop and talk face to face? Door is open.
We stock parts for the brands Lilburn homeowners actually have: Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, and Mighty Mule. That means no waiting a week for a board to ship. And because we service the whole Gwinnett corridor including Lawrenceville, Norcross, Snellville, and Duluth, our trucks are in Lilburn most days of the week. Response time to 30047 and 30048 is usually same day for repairs, and we answer the phone around the clock, seven days a week.
Our Gate Repair Services in Lilburn
Electric Gate Repair
Most electric gate failures in Lilburn trace back to two things: an undersized builder-grade operator or a power run that was never done properly in the first place. A lot of Lilburn’s newer subdivisions came with ornamental iron driveway gates fitted with operators sized for the gate at the showroom, not the gate with thirty years of added hardware. When those operators struggle, they trip, blow boards, or burn out the motor. We diagnose on site, and where it makes sense, we repair the operator you have instead of pushing a replacement. Where it does not make sense, we will show you exactly why before we recommend anything.
On the residential side, we work on Linear, Viking, Ghost Controls, and DoorKing systems more than anything else. Older DoorKing boards with capacitor failures, Linear arms that lost their limits, Viking systems that never got loop detectors. We have seen every way a Lilburn gate can quit.
Automatic Gate Repair
Automatic gates fail in Lilburn at two times of year especially: summer thunderstorm season when red clay heaves posts and knocks photo eyes out of alignment, and January ice events when moisture in the actuator freezes and cracks. A gate that will not open automatically is more than an inconvenience. It traps you in or leaves you with a manual fight that weighs three hundred pounds.
We do the full diagnostic: operator, loop detector, safety edges, photo eyes, battery backup if you have one. Half the time the opener is fine and the post has moved just enough to bind the arm. We reset the post, realign the gate, and the opener works again. That is why we do not quote an automatic gate repair over the phone. We look at it first, then tell you what it costs.
Hinge & Post Repair
This is the most common repair call in Lilburn, full stop. The red clay under Gwinnett County holds water aggressively, and when it swells, gate posts that were set in shallow footings in the 1980s and 1990s heave upward and rotate. That rotation strips hinge screws, misaligns the latch, and puts stress on the opener arm. You cannot fix the gate until you fix the post.
We dig new footings, set the post at the correct depth, weld where welding is needed, and re-hang the gate so it swings true. We do this on site. The gate stays in your driveway. We do not haul it back to a shop and leave you with a gap in the fence line for a week.
Gate Realignment
A gate that drags on the driveway or will not catch the latch is telling you the geometry has shifted. In Lilburn, that shift is nearly always connected to clay movement under the hinge post. Even a gate that was perfectly hung in 1995 has had thirty years of wet-dry cycles acting on the footing.
Realignment sometimes means adjusting hinges and shaving a quarter inch off the bottom. Sometimes it means resetting the post entirely. We have done enough of both in Lilburn to tell the difference in the first five minutes of looking. The estimate is free, and the price is agreed in writing before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lilburn
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Lilburn driveways we see a whole lot of LiftMaster operators on the newer construction and a lot of linear-arm operators on older homes, but DoorKing and Ghost Controls show up regularly too. We stock common parts for these systems and can have less common ones in hand fast. That means a dead opener board in your Lilburn driveway does not mean a week of waiting on freight.
Common Gate Repair Problems We See in Lilburn Homes
- Post heave in red clay. Gwinnett County gets over 50 inches of rain a year, and Lilburn’s clay soil holds that moisture and swells. Posts set in shallow 1980s-90s footings heave and rotate, stripping hinge screws and binding opener arms.
- Builder-grade operators undersized for the gate. Many Lilburn subdivisions from the late 1980s through the 2000s came with ornamental iron gates and operators that were never sized for real use. They fail within two to three years of install and keep failing until someone upgrades or reinforces the system.
- Manual gates automated without conduit. A lot of Lilburn homes added an opener years after the gate went in, but nobody ran conduit during the original build. The power wires sit exposed, UV-degrade in the Georgia sun, and eventually short or trip breakers.
- Falling-limb damage from mature trees. Lilburn lots are heavily wooded with mature pines and hardwoods. A limb down in a storm bends gate frames, knocks posts out of plumb, and wrecks operator arms. We repair the gate and weld the frame on site.
Pricing for Gate Repair in Lilburn, GA
Here is the honest range for the work we do in Lilburn. A hinge or latch adjustment typically runs $120-$250. A full hinge and post reset on a single gate in the 30047 or 30048 area runs $350-$700, depending on whether we are digging a new footing and welding or just resetting and re-anchoring. Gate realignment with operator re-sync runs $180-$400. Electric gate repairs, including board replacement or limit reprogramming, run $200-$600. A complete operator replacement on a heavy ornamental iron gate typically lands between $1,200 and $2,800, parts included.
Those are the ranges, and they cover most of what we see in Lilburn. The price you get is the price you pay. We quote in writing before any work starts, and nobody in a Lilburn driveway ever gets surprised at the end of the job. There is $40 off any repair over $200, there is no trip charge inside Gwinnett County, and seniors and veterans always get 10% off. The estimate is free. Call (877) 610-2993 and we will come look at your gate.
We Also Serve Cities Near Lilburn
Our Gate Repair team works the whole Gwinnett corridor. If you are in Lawrenceville with a sagging wood gate, Norcross with a dead opener, Snellville with a post that has been heaving for a decade, or Duluth with a weld that finally let go, we will come out and fix it. The Lilburn crew runs these routes constantly, so scheduling is quick and parts are close.
Serving Lilburn, GA - Our Local Coverage Area
We’re based in the Lilburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Lilburn
Because the red clay under your hinge post swells with spring and summer rain, pushes the post upward, and the gate sags. Gwinnett County’s clay soil expands aggressively when saturated, and posts set in shallow footings in the 1980s and 1990s have been moving for years. The fix is a deeper footing and a properly anchored post, not just another hinge adjustment. Call (877) 610-2993 and we will look at the post itself.
You can, and we do it regularly in Lilburn’s older subdivisions. The catch is that power has to reach the gate. If no conduit was run during the original build, we trench and run proper conduit now rather than leaving exposed wire that UV-degrades and trips breakers. We size the operator for the actual gate weight, because a kit-sized opener on a heavy ornamental iron gate fails fast.
For heavy ornamental iron gates in Lilburn, we regularly install and service LiftMaster, Viking, DoorKing, and Linear systems, sized to the actual gate weight. The brand matters less than the sizing. A builder-grade operator rated for a 300-pound gate will burn out early on a 600-pound iron gate, and we see that all over Lilburn’s 1990s subdivisions. We spec the operator to the gate, then it runs for years.
Usually not. When Lilburn’s red clay gets saturated, the post moves, and the gate binds. The opener arm feels that resistance and either strains, trips the limit, or burns out the board. We reset the post and realign the gate first, then reinstall and re-sync the operator. Fix the post without the operator and the gate swings free again. Fix the operator without the post and you are doing it twice.
No, a loop detector is for automatically opening or holding the gate when a vehicle is present. If you only use a keypad, a loop detector is not required. But if you want the gate to hold open while your car sits there and then close after you pass, you need one. We can add a loop detector to an existing keypad system in Lilburn, including cutting and sealing the loop in the driveway surface. Call (877) 610-2993 for a free estimate and we will tell you exactly what you need, nothing more.
Call Gatewood Fence & Gate for Gate Repair in Lilburn
When your gate is down in Lilburn, you need a real person on the phone and a truck that actually shows up. That is what we do. Hal Gatewood has been at this since 2001, the name is on the shop, and the shop is down the road. We answer calls around the clock, we quote clearly in writing, and every job carries the 90-Day Done Right Promise. Call (877) 610-2993 for a free estimate today. If the gate is not safe or not working, we will be there the same day.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lilburn since 2001.