Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Lilburn
Gate parts and welding in Lilburn usually means one of two things: a hinge post that has moved in the red clay, or a gate frame that needs a weld so the panel doesn’t sag like a tired mule. Most jobs in the 30047 and 30048 zip codes run $180 to $650 for parts and labor, with full post replacements landing higher. We’re Gatewood Fence & Gate, and we’ve been fixing gates this way since 2001. Hal Gatewood runs the shop, his name is on every invoice, and when you call (877) 610-2993 a live person answers, any hour of the day.
Why Gatewood Fence & Gate Is Lilburn’s Preferred Gate Parts & Welding Company
We work in Lilburn weekly, and that changes how we quote jobs. A gate off Killian Hill Road behaves differently than one near Five Forks Trickum, and the difference is almost always the soil underneath the posts. We know which subdivisions in 30047 were built on cut-and-fill lots where the clay shifted the year after the builder left. Homeowners around the Ronald Reagan Parkway corridor and inside the older neighborhoods off Burns Road call us because their neighbor used us, or because the last company quoted a full replacement when the gate just needed a post reset and two hinge weld repairs.
The reviews from Lilburn customers talk about the same things: the price was the price, the gate stayed fixed through the next wet season, and the person who showed up knew what he was looking at. That’s Hal, or one of his crew who has worked alongside him for years. Background-checked, uniformed, and not in a hurry to sell you a new gate when the old one still has twenty years in it. The 90-Day Done Right Promise is stamped in writing on every ticket. If the fix doesn’t hold, one call brings us back. No runaround.
For Lilburn specifically, we treat dispatch from our Atlanta office and crews travel into Gwinnett County throughout the week. If your gate will not open and your car is stuck in the driveway, that is an emergency and we treat it like one. Call and you talk to a person, not a phone tree.
Our Gate Parts & Welding Services in Lilburn
Our Gate Parts & Welding team handles everything from a single hinge replacement to a full custom-fabricated frame. Here is what most Lilburn homeowners call us for.
Hinge Replacement
Hinge replacement in Lilburn is rarely just a hinge. The red clay here expands so much after summer thunderstorms that the post itself moves, and once the post rotates even a few degrees, the hinge screws lose their bite. We reset the post, true the gate, and install hinges that actually fit the weight of the panel. A basic single-family swing gate hinge replacement runs $120 to $260 when the post is still solid. If the post needs work, the price changes, and we will tell you that before we touch anything.
Post Replacement
Post replacement is the most common repair we perform in Lilburn, and it is almost never an optional upgrade. A gate post set in Lilburn clay without a concrete footing deep enough below the frost line will rotate within a few wet seasons. We dig out the old post, set a new one in concrete at 42 inches or deeper where the gate carries an opener arm, and weld or re-bolt the hinges so the gate closes true. Most residential post replacements in Lilburn run $350 to $750 depending on depth, post size, and whether we have to disturb a brick column or neighboring fence section.
Rail Repair
Heavily wooded lots along the Yellow River corridor and in the subdivisions west of Lawrenceville Highway drop limbs onto driveway gates every storm season. When a pine limb comes down across an ornamental iron top rail, it bends or snaps the rail and throws the whole frame out of square. We cut out the damaged section, weld in a matching or heavier replacement rail, and repaint the repair to match. Rail repair by our welder averages $150 to $400 on site.
Custom Welding
Custom welding is where we spend a lot of time in Lilburn, because the gates here do not match what the big-box stores sell. We fabricate solar opener brackets for farm gates, rebuild narrow pedestrian gates for older brick ranch homes, extend swing gate posts for automated openers, and relocate latch plates on settled frames. Hal welds on site in your driveway. The gate stays where it is, and you do not pay a haul-off fee that never appears until the invoice does. Hourly welding runs $90 to $140, and small bracket or crack repairs are usually a one-hour job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lilburn
We service and install parts for the gate opener brands most common across Lilburn and Gwinnett County: FAAC arms on older subdivision driveway gates, BFT controllers on newer installs, Linear operators on slide gates, and Viking on commercial and estate gates. We keep a rolling stock of common boards, arms, and safety parts so a diagnostic call on a FAAC or BFT opener can often turn into a finished repair the same visit. If we have to order a part, we will show you the lead time and the written price before you approve anything.
Common Gate Parts & Welding Problems We See in Lilburn Homes
- Post rotation in expansive red clay. A post set without deep concrete footings, common in homes built from the mid-1980s through the 1990s, rotates toward the gate’s weight and strips the hinge screws. The latch stops aligning, and the opener arm binds against the post bracket.
- Wide farm-style gates overloading standard swing hinges. Long driveway gates along Ronald Reagan Parkway and the rural edges of 30048 put enormous leverage on the hinge post. Standard weld joints crack at the post connection over time, even when the gate itself looks fine.
- Storm damage from mature pines and hardwoods. Falling limbs bend top rails, snap pickets, and crack welds at corner joints. The old-growth tree canopy is part of what makes Lilburn feel like Lilburn, but it is hard on gates.
- Opener failures caused by clay-induced binding. When a gate post rotates, the gate rubs or jams against the latch and the opener motor fights the weight every cycle. The opener burns out, sometimes while the gate itself is still repairable. We fix the post and the opener together instead of replacing the opener into the same misaligned mess.
Pricing for Gate Parts & Welding in Lilburn, GA
Here is what we charge in Lilburn today, not what a national call center quotes over the phone and changes at the door. Hinge replacement runs $120 to $260 for most residential swing gates. Post replacement runs $350 to $750 for a standard wood or steel post set in concrete. Rail repair runs $150 to $400 depending on the damage. Custom welding runs $90 to $140 per hour, one-hour minimum. Full ornamental iron gate rebuilds, including a new hinge post, two hinge replacements, and rail straightening, typically land between $650 and $1,200. Every quote is written, agreed to before work starts, and includes the 90-Day Done Right Promise in writing. We do not add a trip charge inside Gwinnett County. There is $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and Hal will give you a straight number.
We Also Serve Cities Near Lilburn
Our crew covers Lilburn, Lawrenceville, Norcross, Snellville, and Duluth throughout the week. If you live just outside Lilburn in unincorporated Gwinnett, call anyway. We will tell you on the phone whether we can help, and there is no trip charge inside the county.
Serving Lilburn, GA - Our Local Coverage Area
We’re based in the Lilburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Lilburn
Lilburn sits on Georgia Piedmont red clay, and that clay expands when it absorbs water from Gwinnett County’s 50-plus inches of annual rainfall. A post set shallow or without a concrete collar will push upward and rotate as the clay swells, then settle unevenly when the ground dries. Each wet season the lean gets worse. The fix is a post reset with a concrete footing dug below the frost line, usually 42 inches here, and then a re-alignment of hinges and latch. Call (877) 610-2993 and we will look at the post before selling you a hinge. Estimates are free.
Yes, and we do this regularly for properties along the Ronald Reagan Parkway corridor where running conduit from the house would cost more than the opener. We fabricate a steel mounting bracket to fit your gate’s exact post and rail configuration, weld it on site, and set the solar panel angle for the tree cover on your side of the lot. This is a custom welding job, usually two to three hours. The bracket and panel install are part of the written quote before we start.
We fix the post, not just the latch plate. In Lilburn, a binding latch on an ornamental iron driveway gate is almost always a symptom of post rotation in the clay, especially on gates installed as builder upgrades in the 1990s. We reset the post in concrete below the reactive soil zone, remount the hinges at true vertical, and only then adjust or relocate the latch plate. Grinding or filing the latch to make it “work” on a leaning post is a temporary patch. We do the job in the driveway, and the 90-Day Done Right Promise covers the result through the next wet season.
If the slide gate is automated and crosses a driveway, yes, you need working entrapment protection. Lilburn properties near Killian Hill Road often have slide gates with older openers that were installed before current safety standards. When we repair or replace the opener, we inspect the loop detector and the photocell alignment, and if either is missing or failed, we quote the repair in writing at the same visit. A slide gate opener with no photocell is a machine that will not stop when a car or child is in its path. We will not put that back into service as-is.
The right fix starts with the posts. A sagging chain-link gate on a long rural driveway in 30048 usually has hinge posts tilting toward the gate’s weight because the original footings were too shallow for Lilburn’s expansive clay. Rehanging the gate on the leaning posts buys a few months. We dig out the hinge posts, set new ones in concrete below the frost line, then weld or clamp new hinge brackets and true the gate frame so the latch side clears without dragging. For wide farm gates, we often reinforce the hinge post with a welded diagonal brace. You can call (877) 610-2993 for a free second opinion on any written estimate you already have, or just to have Hal walk the gate and tell you what is actually wrong.
Contact Gatewood Fence & Gate in Lilburn, GA
If your gate leans, sags, binds, or will not open, call (877) 610-2993. Hal Gatewood answers the phone himself more often than not, and when he doesn’t, it is someone who works in his shop and knows the Lilburn area. We will give you a straight price before any work starts, and the 90-Day Done Right Promise is stamped on every job we write. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Lilburn since 2001.