Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Grapevine
Gate repair in Grapevine usually runs between $180 and $340 for a typical hinge realignment or limit-switch adjustment, and we can have a truck at your gate in under an hour most days. We know the streets here the way you do: the brick subdivisions off Hall-Johnson, the lakeside drives off Fairway, the older lots near downtown that still have original ironwork from decades ago. Hal Gatewood has worked on gates in Grapevine long enough to know which neighborhoods sit on the worst clay, which operators fail first in a July heat wave, and which gates at the resort corridor get cycled more in a week than a home gate sees in a year. Call (877) 610-2993 and a live person answers. No voicemail, no queue, no runaround.
Why Gatewood Fence & Gate Is Grapevine’s Preferred Gate Repair Company
We’re not a franchise and we don’t send a rotating cast of subcontractors. Hal Gatewood owns the company, his name is on the shop, and his crew works out of our Dallas-Fort Worth office and serves Grapevine locally. When you call about a gate that won’t close on Dove Loop or a swing operator grinding near Oak Grove Park, the person who shows up knows the job and does the welding right there in your driveway. Our Google reviews from Grapevine homeowners mention the same things over and over: the estimate matched the invoice, the person who fixed the gate actually fixed it, and when something needed follow-up, one call brought us back.
Every job gets the 90-Day Done Right Promise in writing. Not “up to” 90 days, not “in most cases.” If it’s not done right, we make it right. That’s the whole sentence. We stand behind it because a gate that sags again in six weeks was never fixed properly in the first place, and we’d rather re-set a post than argue about it. Hal has been at this since 2001, which means he has worked on the same Grapevine gates twice, ten years apart, and he remembers what he did the first time.
Our Gate Repair Services in Grapevine
Gate Realignment
A gate that drags on the driveway or catches at the latch is almost never a “gate problem.” It’s a post problem. In Grapevine, the expansive black cotton clay under most of 76051 swells with every spring rain and shrinks through every August drought, heaving hinge posts out of plumb a fraction of an inch at a time. We re-set the post to true vertical, shim the hinges, and rehang the leaf so it swings clean and latches without fighting. Then we check the operator’s travel limits so the motor isn’t working against a gate that’s no longer binding. A realignment in Grapevine typically runs $190 to $310 depending on how far the post has moved.
Hinge & Post Repair
On ornamental iron estate gates near Grapevine Lake, the hinge post takes the full weight of the leaf every time it opens. Clay soil movement turns that post into a slow-motion lever, and eventually the barrel hinge wallows out or the weld cracks at the base. We cut out the failed section, weld in new plate or replace the hinge barrel entirely, and set the post deeper with a proper concrete footer. If you’ve been told the whole gate needs replacing, get a second opinion first. We do free second opinions on any written estimate, and half the time the gate just needed a post that was actually plumb.
Electric Gate Repair
Grapevine’s summers sit above 100°F for weeks at a stretch, and that heat bakes the wiring harnesses inside 20- and 30-year-old gate operators until the insulation cracks and shorts. We see intermittent failures where a LiftMaster or Linear board works fine at 8 a.m. and throws error codes by 3 p.m. The board isn’t always the problem; the harness feeding it is. We trace the circuit, replace the damaged conductor, and only recommend a new board if the old one is genuinely dead. Electric gate repair in Grapevine runs $220 to $480 depending on whether it’s wiring, a capacitor, or a logic board.
Automatic Gate Repair
Automatic gates take a beating here. Residential operators on 1990s-era homes in Grapevine’s brick subdivisions are now decades old, with worn drive gears and tired limit switches. When a FAAC or BFT operator starts opening halfway or reversing for no reason, the fix is usually mechanical wear, not a programming glitch. We service, adjust, and replace drive components on the operator you own. If the operator is truly dead, we tell you honestly what a direct replacement costs and what your repair options are before you spend a dime. Automatic gate repair in Grapevine typically runs $260 to $520, with most jobs done the same day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We’re certified to service nine major gate brands, and in Grapevine we see a lot of LiftMaster on residential gates, FAAC and BFT on lakeside estate systems, and Linear and Viking on the resort corridor’s commercial slide gates. We keep common drive gears, limit switches, loop detectors, and circuit boards in stock for these brands so a repair doesn’t stall while a part ships from across the country. For less common failures, we source locally and fast. The point is this: when we tell you we can fix it, we have the part to do it, or we tell you up front when it’ll arrive. No surprises.
Common Gate Repair Problems We See in Grapevine Homes
- Clay-heaved hinge posts. Grapevine’s black cotton soil swells in spring and shrinks in summer, pushing posts out of plumb season after season. A gate that was square in March can drag by June, and by late August it’s racking the operator. Re-setting the post is the fix; adjusting the hinges is a temporary band-aid.
- UV-cracked wiring and fried boards. A hundred degrees in the shade, week after week, is brutal on 20-year-old operator harnesses. Cracked insulation causes shorts that mimic dead boards, and we have traced more than a few “bad” FAAC and LiftMaster boards back to a 30-cent piece of heat-rotted wire.
- Worn drive gears on aging residential operators. Most of Grapevine’s 1990s-built subdivisions came with ornamental iron gate systems now long past their original service life. Drive gears strip, limit switches drift, and the gate stops mid-travel. The operator housing is fine; the drive train is exhausted.
- Resort-corridor slide gates burning through rack and pinion teeth. Along SH-26 near Grapevine Mills and the Gaylord Texan, commercial slide gates cycle thousands of times a month. The rack and pinion teeth wear out on a schedule a residential gate never sees, and loop detectors fail from constant traffic. We replace the rack section, tune the operator, and get the entry moving again without shutting down the whole property.
Pricing for Gate Repair in Grapevine, TX
A basic gate realignment in Grapevine runs $190 to $310. Hinge and post work goes $280 to $550 depending on how deep the post needs to be re-set and whether we’re welding new plate. Electric gate repair lands between $220 and $480 for most wiring, capacitor, and control-board jobs. Full automatic gate repair, where we’re replacing drive gears or a dead operator, runs $260 to $720 for residential work, and commercial slide gates on the resort corridor go higher because the components are heavier and the cycles are relentless. Every price is quoted and agreed before any work starts. The number we give you on the phone is the number on the invoice. Call (877) 610-2993 and we’ll come out and look at your gate for free before we ask you to spend anything.
We Also Serve Cities Near Grapevine
Gatewood Fence & Gate handles Gate Repair for homes and businesses in Grapevine and the surrounding area, including Southlake, Colleyville, Coppell, and Euless. If you’re off 121 or west of the airport, we’re already in your part of the metro, and the same crew that fixes a resort gate near Grapevine Mills can be at your back gate the same afternoon.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Grapevine
Your gate is fighting the clay. Grapevine sits on expansive black cotton soil that absorbs spring rain and swells, then loses that moisture through July and August and shrinks by inches. That cycle moves your hinge post a little every year, and by late summer the post has drifted far enough out of plumb that the gate leaf racks against its hinges and the operator strains to move it. The fix is re-setting the post deeper and truer, not just greasing the hinges. Call (877) 610-2993 and we’ll check the post before we touch the gate.
Yes. We stage the repair so you keep partial entry open, repair the gate section by section, and schedule the heaviest work for your lowest-traffic hours. We have done this for years at resort and event properties along SH-26 where shutting an entry entirely isn’t an option, and we know the operator brands on those gates well enough to bring the right parts the first trip. Call (877) 610-2993 and we’ll come assess it before you commit to anything.
Every 90 days minimum. A commercial slide gate along the SH-26 resort corridor cycles more in one year than a typical Grapevine residential gate cycles in a decade, so drive motors, rack teeth, and loop detectors wear on an accelerated schedule. Quarterly service catches a dying capacitor or slipping drive gear before the gate locks up mid-travel and blocks an entire entry. We service the operators that never made it onto a neighboring city’s work order board. Call (877) 610-2993 for a service schedule quote.
Rust at the hinge post is a warning sign but not automatically a failure. On lakeside estate gates near Grapevine Lake, surface rust usually means the paint has cracked from years of post movement, and that’s worth looking at before the rust eats through the post wall. We clean the area, weld any thinned steel back to full thickness, and repaint so the post doesn’t keep degrading. If the post has heaved, we re-set it first; welding rust on a leaning post is a waste of your money. Call (877) 610-2993 and we’ll tell you which one you’re dealing with.
Yes. Any automatic gate in Grapevine that can pinch, crush, or trap a person or pet is required to have entrapment protection, and that’s not a paperwork technicality: a gate without working safety edges or photo eyes can seriously hurt someone, especially a child. We install and test photo eyes, safety edges, and force-sensing operators on every automatic gate we service, and we’ll tell you plainly if your current setup isn’t safe. Call (877) 610-2993 and we’ll inspect your gate’s entrapment protection as part of a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grapevine since 2001.